Sony DSLR-A300X / DSLR-A350X / SAL55200 Service Manual ▷ View online
4-5
SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)
5)
Specify “C:\MCC” for the extract destination folder.
Fig.4-1-5
6)
The window returns to the menu to specify the extract destination folder. Click
[Unzip]
.
Fig.4-1-6
7)
When the window below appears, click [OK].
Fig.4-1-7
8)
Return to the menu to specify the extract destination folder. Then, click
[Close]
to close the window.
4-6
SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)
2. Setup of PC Card
1)
Double-click “InstaCal.exe” in “C:\MCC” folder to begin the installation.
Fig.4-1-8
2)
The menu to begin the installation appears. Click
[Next>]
.
Fig.4-1-9
3)
Specify the install destination folder. As the default is used for it, click
[Next>]
.
Fig.4-1-10
4-7
SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)
4)
The menu to tell that the wizard is ready to install appears. Click
[Install]
.
Fig.4-1-11
5)
The installation is completed. Click
[Finish]
.
Note:
To refer to the “readme” file, check the “Show the readme file” and click
[Finish]
.
Fig.4-1-12
6)
To make the configuration installed effective, the window to prompt the restart appears.
Click “Yes” to restart the PC.
Note:
If a device is connected without restarting, the program may not work properly.
Fig.4-1-13
4-8
SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)
7)
After restarting the PC, insert the PC-CARD-DIO48 in the PC card slot.
8)
The software installation window appears.
Click “Install the software automatically. (Recommended)”.
Fig.4-1-14
9)
The software is detected and installed. When the window below appears, click
[Finish]
to terminate the installation.
Fig.4-1-15
Click on the first or last page to see other DSLR-A300X / DSLR-A350X / SAL55200 service manuals if exist.