Sony DSC-U10 (serv.man3) Service Manual ▷ View online
T
rou
blesh
blesh
oot
in
g
85
Warnings and messages
The following messages appear on the LCD screen.
Message
Meaning/Corrective Action
NO MEMORY STICK
• Insert a “Memory Stick” (page 22).
SYSTEM ERROR
• Turn the power off and on again (page 19).
MEMORY STICK ERROR
• The inserted “Memory Stick” cannot be used in your camera (page 92).
• The “Memory Stick” is damaged, or the terminal section of the “Memory Stick” is dirty.
• Insert the “Memory Stick” correctly (page 22).
• The “Memory Stick” is damaged, or the terminal section of the “Memory Stick” is dirty.
• Insert the “Memory Stick” correctly (page 22).
FORMAT ERROR
• The “Memory Stick” format failed. Format the “Memory Stick” again (page 54).
MEMORY STICK LOCKED
• The write-protect switch on the “Memory Stick” is set to the LOCK position. Set it to
the recording position (page 92).
NO MEMORY SPACE
• The capacity of the “Memory Stick” is insufficient. You cannot record images. Delete
unnecessary images (page 52).
NO FILE
• No images have been recorded on the “Memory Stick.”
FILE ERROR
• An error occurred while playing back the image.
FOLDER ERROR
• A folder with the same name already exists on the “Memory Stick.”
INVALID OPERATION
• You are playing back a file that was created on equipment other than this camera.
• You are attempting to assign the print mark to a file that contains a movie or that was
• You are attempting to assign the print mark to a file that contains a movie or that was
created by another device.
• The battery level is low or zero. Charge the batteries (page 12). Depending on the
conditions of use or the type of batteries, the indicator may flash even though there are
still 5 to 10 minutes of remaining battery time left.
still 5 to 10 minutes of remaining battery time left.
LENS COVER CLOSED
• The lens cover is closed when the mode switch is set to STILL or MOVIE.
SHOOTING ERROR
• Change the image size and try the shooting again.
86
Self-diagnostics display
– If a code starting with an alphabet letter appears
Your camera has a self-diagnostics display. This
function displays the camera condition on the LCD
screen with a combination of a letter and four numerical
digits. If this occurs, check the following code chart and
attempt the corresponding corrective actions. The last
two digits (indicated by ss) will differ depending on
the state of the camera.
function displays the camera condition on the LCD
screen with a combination of a letter and four numerical
digits. If this occurs, check the following code chart and
attempt the corresponding corrective actions. The last
two digits (indicated by ss) will differ depending on
the state of the camera.
If you are unable to solve the problem even after trying
the corrective actions a few times, repairs may be
necessary. Contact your Sony dealer or local authorized
the corrective actions a few times, repairs may be
necessary. Contact your Sony dealer or local authorized
Sony service facility and inform them of the 5-digit
code. (Example: E61:10)
code. (Example: E61:10)
C:32:ss
Self-diagnostics display
Code
Cause
Corrective action
C:32:
ss
There is trouble with your camera’s hardware, or with
the zoom function.
the zoom function.
• Turn the power off and on again (page 19).
C:13:
ss
The camera cannot read or write data in the “Memory
Stick.”
Stick.”
• Re-insert the “Memory Stick” several times.
An unformatted “Memory Stick” is inserted.
• Format the “Memory Stick” (page 54).
The inserted “Memory Stick” cannot be used with your
camera, or the data is damaged.
camera, or the data is damaged.
• Insert a new “Memory Stick” (page 22).
E:61:
ss
E:91:
ss
A camera malfunction that you cannot reverse has
occurred.
occurred.
• Press the RESET button (page 78) located on the
bottom of the camera, then turn the power on again.
87
Ad
dit
iona
dit
iona
l inf
o
rm
a
tion
Menu items
Menu items that can be modified differ depending on
the position of the mode switch.
The LCD screen shows only the items you can operate
at the moment. Factory settings are indicated with x.
the position of the mode switch.
The LCD screen shows only the items you can operate
at the moment. Factory settings are indicated with x.
When the mode switch is set to STILL (when [
] is selected)
When the mode switch is set to MOVIE (when
is selected)
Item
Setting
Description
SIZE·BURST
x1280×960 / 640×480 / BURST
Selects the image size when shooting still images (pages 23 and
38).
38).
FOCUS
xAUTO /
0.2 m /
0.5 m /
1.0 m /
∞
Selects the auto focus method or sets the focus preset (page 36).
SELFTIMER
ON / xOFF
Sets the self-timer (page 29).
P.EFFECT
xOFF / NEG. ART / SEPIA / B&W /
SOLARIZE
SOLARIZE
Sets the image special effects (page 40).
Item
Setting
Description
FOCUS
xAUTO
/
0.2 m
/
0.5 m /
1.0 m /
∞
Selects the auto focus method or sets the focus preset (page 36).
SELFTIMER
ON / xOFF
Sets the self-timer (page 29).
P.EFFECT
xOFF / NEG. ART / SEPIA / B&W /
SOLARIZE
SOLARIZE
Sets the image special effects (page 40).
Additional information
88
When the mode switch is set to PLAY (when [
] is selected)
* The following menus are available no matter what position
the mode switch is in.
When [
] is selected
Item
Setting
Description
DELETE
OK
CANCEL
CANCEL
– Deletes the displayed image (page 52).
– Cancels deleting of the image.
– Cancels deleting of the image.
DELETE ALL
OK
CANCEL
CANCEL
– Deletes all images (page 52).
– Cancels deleting of the image.
– Cancels deleting of the image.
INDEX / SINGLE
—
Switches between four-image display and single image display.
PRINT
ON / OFF
Marks/unmarks the print mark on still images you want to print
(page 46).
(page 46).
Item
Setting
Description
LCD LIGHT
xON / OFF
Selects the brightness of the LCD light. Selecting [ON] makes
the screen bright and easy to see when using the camera in dark
locations, but also uses up the battery charge faster (page 28).
the screen bright and easy to see when using the camera in dark
locations, but also uses up the battery charge faster (page 28).
DISPLAY
ON
xOFF
xOFF
– Displays all indicators.
– Displays only warning messages.
– Displays only warning messages.
Click on the first or last page to see other DSC-U10 (serv.man3) service manuals if exist.