Sony DSC-U10 (serv.man3) Service Manual ▷ View online
65
Co
pying im
pying im
age
s
,
Follow instructions on each succeeding
screen.
screen.
When installation is complete, the “Read Me” text
appears. Read the text, then close the window by
clicking
appears. Read the text, then close the window by
clicking
at the upper right corner of the screen. After
that, click [Finish] in the install screen to close the
install screen.
install screen.
•
If DirectX8.0a or a later version is not installed in your
computer, the “Information” screen appears.
computer, the “Information” screen appears.
,
Click [OK].
The “Microsoft DirectX8.0a Setup” screen appears.
•
When using Windows XP, you need not install DirectX.
Restart your computer and proceed to page 66.
Restart your computer and proceed to page 66.
•
You do not need to install “DirectX” again if “DirectX Ver.
8.0a” or later is already installed in your computer.
8.0a” or later is already installed in your computer.
13
Click here
14
Click here
66
, Click [Install] at the “DirectX(R) Setup”
screen, then when the “DirectX Setup”
screen appears, click [OK].
screen appears, click [OK].
DirectX installation starts. When installation is
complete, your computer restarts.
complete, your computer restarts.
, Remove the CD-ROM.
Then, you can establish the USB connection.
15
Click here
16
67
Co
pying im
pying im
age
s
2
Preparing your camera
,
Insert the “Memory Stick” with the
images you want to copy into the
camera.
images you want to copy into the
camera.
•
For further details on the “Memory Stick”, see page 22.
•
When your camera is connected to a computer, it draws
power from the computer side. Removing the Nickel Metal
Hydride batteries before connecting the camera is
recommended in order to prevent battery deterioration.
power from the computer side. Removing the Nickel Metal
Hydride batteries before connecting the camera is
recommended in order to prevent battery deterioration.
,
Turn on your computer.
1
“Memory Stick”
2
68
3
Connecting your camera to your computer
,
Open the jack cover, and connect the
supplied USB cable to your camera.
supplied USB cable to your camera.
• Operations are not guaranteed when using a USB
hub.
,
Connect the other end of the USB cable
to your computer.
to your computer.
The camera is on.
•
Even if there are no batteries in the camera, most computers
that are recommended for use with this camera can supply
power to the camera through the USB connection. (USB Bus
Powered)
that are recommended for use with this camera can supply
power to the camera through the USB connection. (USB Bus
Powered)
•
When using a desktop computer, connect the USB cable to
the USB connector on the rear panel.
the USB connector on the rear panel.
•
When using Windows XP, the copy wizard automatically
appears on the desktop. Proceed to page 72.
appears on the desktop. Proceed to page 72.
1
2
Click on the first or last page to see other DSC-U10 (serv.man3) service manuals if exist.