DOWNLOAD Sony DSC-U10 (serv.man2) Service Manual ↓ Size: 2.66 MB | Pages: 53 in PDF or view online for FREE

• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (992998751.pdf).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (992998741.pdf).

• Reference No. search on printed wiring boards is available.

This service manual provides the information that is premised the circuit board replacement service and not intended repair
inside the DD-182, PD-174 and TY-13 boards.
Therefore, schematic diagram, printed wiring board, waveforms, mounted parts location and electrical parts list of the DD-182,
PD-174 and TY-13 boards are not shown.
The following pages are not shown.

Schematic diagram ........................... Pages 4-11 to 4-24
Printed wiring board .......................... Pages 4-39 to 4-44
Waveforms .......................................... Pages 4-58 and 4-59

Mounted parts location ...................... Pages 4-61 and 4-62
Electrical parts list ............................ Pages 5-6, 5-7, 5-9,

5-11 to 5-13

US Model

Canadian Model

AEP Model

UK Model

E Model

Hong Kong Model

Australian Model

Chinese Model

Korea Model

Tourist Model

Japanese Model

— 2 —

6.65 mm (1/2.7 type) color CCD
Primary color filter

Approx. 1 340 000 pixels

Approx. 1 260 000 pixels

Single focal lens
f = 5.0 mm (7/32 inches) (35 mm camera 
conversion: 33 mm (1 5/16 inches))
F2.8

Automatic, Scene selection (three modes)

Still images: DCF compliant 
(Exif Ver. 2.2 JPEG compliant), 
DPOF compatible
Movies: MPEG1 compliant (without audio)

“Memory Stick”

Recommended distance: 0.5 m to 1.8 m (1.6 to 
6.0 ft)

mini-B

2.5 cm (1.0 type) TFT drive

64 460 (293 

×

 220) dots

AAA Nickel Metal Hydride batteries (2) 2.4 V
5 V (from USB cable)

1.25 W

0

°

C to +40

°

C (32

°

F to +104

°

F)

–20

°

C to +60

°

C (–4

°

F to +140

°

F)

85 

×

 29 

×

 40 mm 

(3 3/8 

×

 1 3/16 

×

 1 5/8inches)

(W/H/D, protruding portions not included)

118 g (4.2 oz) (AAA Nickel Metal Hydride 
batteries, “Memory Stick,” and neck strap 
included)

AC 100 to 240V 50/60Hz
2.2 W

Size AA: DC 1.8V, 165 mA 

×

 2

Size AAA: DC 1.8V, 70 mA 

×

 2

 

70 

×

 29 

×

 74 mm (2 7/8 

×

 1 3/16 

×

 3 inches) 

(W/H/D)

Approx. 70g (2.5 oz.)

0

°

C to 40

°

C (32

°

F to 104

°

F)

• Size AAA Ni-MH batteries (2) 

• Ni-MH battery charger (1)

• Power cord (mains lead) (1)

• USB cable (1)

• Neck strap (1)

• “Memory Stick” (8MB) (1)

• CD-ROM (SPVD-008) (1)

• Operating instructions (1)

Design and specifications are subject to change without notice.

— 3 —

1.

Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.

2.

Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.

3.

Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.

4.

Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.

5.

Check the B+ voltage to see it is at the values specified.

6.

Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270˚C

during repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)

Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40

°

C higher than

ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350

°

C.

Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!

• Strong viscosity

Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.

• Usable with ordinary solder

It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

0

0

0

— 4 —

Section

Title

Page

1-1.

Note for Repair ································································ 1-1

1-2.

Discharging of the SL-59 Flexible Board’s
Charging Capacitor (C601) ············································· 1-1

1-2-1. Preparing the Short Jig ···················································· 1-1
1-2-2. Discharging the Capacitor ··············································· 1-1
1-3.

Description on Self-diagnosis Display ···························· 1-2

2-1.

Cabinet (Front) Assembly ··············································· 2-2

2-2.

OP-17 Flexible Board ······················································ 2-2

2-3.

Cabinet (Rear) Assembly ················································· 2-3

2-4.

Bottom Frame Assembly ················································· 2-3

2-5.

TY-13 Board ···································································· 2-4

2-6.

US-4 Flexible Board ························································ 2-4

2-7.

PD-174 Board ·································································· 2-5

2-8.

Lens Block Assembly ······················································ 2-5

2-9.

Cabinet (Upper) Assembly ·············································· 2-6

2-10. SL-59 Flexible Board ······················································ 2-6
2-11. CCD Block Assembly ····················································· 2-7
2-12. DD-182 Board ································································· 2-7
2-13. Circuit Boards Location ·················································· 2-9

3-1.

Overall Block Diagram ··················································· 3-1

3-6.

Power Block Diagram (1/2) ··········································· 3-11

3-7.

Power Block Diagram (2/2) ··········································· 3-13

4-1.

Frame Schematic Diagram ·············································· 4-1

4-2.

Schematic Diagrams ························································ 4-5
CD-404 FLEXIBLE (1/2) (CCD IMAGER) ··················· 4-7
CD-404 FLEXIBLE (2/2) (CAMERA MODULE) ········· 4-9
SL-59 FLEXIBLE
(CHARGING CAPACITOR, FLASH UNIT) ··············· 4-25
ST-74 (FLASH DRIVE) ················································ 4-25
US-4 FLEXIBLE (USB CONNECTOR) ······················ 4-27
OP-17 FLEXIBLE (LENS COVER DETECT) ············ 4-28
SW-376 FLEXIBLE
(CONTROL SWITCH, MS CONNECTOR) ················ 4-29
RS-85, FP-532, FP-533 FLEXIBLE ····························· 4-31

4-3.

Printed Wiring Boards ··················································· 4-35
CD-404 FLEXIBLE ······················································ 4-37
SL-59 FLEXIBLE ························································· 4-45
ST-74 ············································································· 4-47
US-4 FLEXIBLE ··························································· 4-49
OP-17 FLEXIBLE ························································· 4-51
SW-376 FLEXIBLE ······················································ 4-53

4-4.

Waveforms ····································································· 4-57

4-5.

Mounted Parts Location ················································ 4-60

5-1.

Exploded Views ···························································· 5-1

5-1-1. Cabinet Section ····························································· 5-1
5-1-2. Cabinet (Upper) and Bottom Section ···························· 5-2
5-1-3. Stroboscope and Lens Section ······································ 5-3
5-1-4. Battery Holder and LCD Section ·································· 5-4
5-2.

Electrical Parts List ······················································· 5-5