Sony DSC-U10 (serv.man3) Service Manual ▷ View online
69
Co
pying im
pying im
age
s
“USB MODE: NORMAL ” appears on the LCD screen.
When a USB connection is established for the first
time, your computer automatically runs the used
program to recognize your camera. Wait for a while.
When a USB connection is established for the first
time, your computer automatically runs the used
program to recognize your camera. Wait for a while.
•
If “USB MODE: NORMAL” is not shown in step 3,
confirm that [USB] is set to [NORMAL] in [
confirm that [USB] is set to [NORMAL] in [
] (page 89).
•
In USB mode, the POWER button, lens cover and other
controls on the camera do not function.
controls on the camera do not function.
3
USB MODE:NORMAL
Disconnecting the USB cable from
your computer or removing the
“Memory Stick” from your camera
during USB connection
your computer or removing the
“Memory Stick” from your camera
during USB connection
For Windows 2000, Me, or XP users
1
Double-click
on the tasktray.
2
Click
(Sony DSC), then click [Stop].
3
Confirm the device on the confirmation screen,
then click [OK].
then click [OK].
4
Click [OK].
This step is unnecessary for Windows XP users.
This step is unnecessary for Windows XP users.
5
Disconnect the USB cable or remove the
“Memory Stick.”
“Memory Stick.”
For Windows 98 or 98SE users
Do only step
5
above.
When the access lamp is lit up, it means that
image data is being read or written. Never
remove the “Memory Stick” or disconnect the
USB cable at this time, as the data may be
damaged.
image data is being read or written. Never
remove the “Memory Stick” or disconnect the
USB cable at this time, as the data may be
damaged.
70
4
Copying images
“Image Transfer” launches and the images are
automatically copied to the computer. When copying is
complete, “ImageMixer” automatically launches and a
list of images appears.
automatically copied to the computer. When copying is
complete, “ImageMixer” automatically launches and a
list of images appears.
•
Normally “Image Transfer” and “Date” folders are created
inside the “My Documents” folder, and all of the image files
recorded with your camera are copied into these folders.
inside the “My Documents” folder, and all of the image files
recorded with your camera are copied into these folders.
•
You can change the “Image Transfer” settings at the SETUP
screen.
screen.
Copying images without using “Image
Transfer”
Transfer”
If you do not set to launch “Image Transfer”
automatically, you can copy images as following
procedure.
automatically, you can copy images as following
procedure.
a
Double-click [My Computer], then
double-click [Removable Disk].
double-click [Removable Disk].
The contents of the “Memory Stick” inserted in
your camera appear.
your camera appear.
• This section describes an example of copying images to
the “My Documents” folder.
• When the “Removable Disk” icon is not shown, see
page 71.
• When using Windows XP, see page 72.
b
Double-click [DCIM], then double-click
[100MSDCF].
[100MSDCF].
The “100MSDCF” folder opens.
• The “100MSDCF” folder contains the still image files
you shot using your camera.
• The folder names vary depending on the type of images
they contain (page 74).
71
Co
pying im
pying im
age
s
c
Drag and drop the image files into the
“My Documents” folder.
“My Documents” folder.
The image files are copied to the “My
Documents” folder.
Documents” folder.
• When you try to copy an image to a folder in which an
image with the same file name is stored, the overwrite
confirmation message appears. When you want to
overwrite the existing image with the new one, click
[Yes]. In this time, the original one is deleted. When
you do not want to overwrite it, click [No], then change
the file name.
confirmation message appears. When you want to
overwrite the existing image with the new one, click
[Yes]. In this time, the original one is deleted. When
you do not want to overwrite it, click [No], then change
the file name.
When a removable disk icon is not
shown
shown
1
Right-click [My Computer], then click [Properties].
The “System Properties” screen appears.
The “System Properties” screen appears.
2
Confirm if other devices are already installed.
1
1
Click [Device Manager].
2
Double-click [
Other Devices].
3
Confirm if there is a “
Sony DSC” or “
Sony Handycam” with a
mark.
3
If you find either of the devices above, follow the
steps below to delete them.
1
steps below to delete them.
1
Click [
Sony DSC] or [
Sony Handycam].
2
Click [Delete].
The “Device deletion confirmation” screen
appears.
The “Device deletion confirmation” screen
appears.
3
Click [OK].
The device is deleted.
The device is deleted.
Try the USB driver installation again using the supplied
CD-ROM (page 58).
CD-ROM (page 58).
72
4
Copying images
Copying images using “Image Transfer”
Windows XP is set so that the OS Auto Playback
Wizard activates. Follow the procedure below to cancel
the setting.
Wizard activates. Follow the procedure below to cancel
the setting.
* This procedure does not need to be performed for subsequent
image downloads.
a
Connect the camera and your computer
with a USB cable (page 68).
with a USB cable (page 68).
b
Click [Start], then click [My Computer].
c
Right-click [Sony MemoryStick], then
click [Properties].
click [Properties].
d
Cancel the setting.
1
Set [Content type] to [Pictures].
2
Check [Select an action to perform] under
[Actions], select [Take no action], then click
[Apply].
[Actions], select [Take no action], then click
[Apply].
3
Set [Content type] to [Video files] and [Mixed
content], and repeat step 2.
content], and repeat step 2.
4
Click [OK].
The [Properties] screen closes.
The [Properties] screen closes.
e
Disconnect and then reconnect the USB
cable (page 69).
cable (page 69).
“Image Transfer” starts up automatically and the
images are automatically copied to the computer.
images are automatically copied to the computer.
Click on the first or last page to see other DSC-U10 (serv.man3) service manuals if exist.