Sony DSC-R1 (serv.man4) Service Manual ▷ View online
6-27
DSC-R1_ADJ
11. CAMERA Adjustment 6
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. C MOS Linearity Check
3. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. C MOS Linearity Check
3. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the
1) Click the
[Start]
button of the CAMERA Adjustment 6.
2) The Automatic Adjustment Program executes the “1. Data Set-
ting during Camera Adj.”.
3) Upon successful completion of “1. Data Setting during Cam-
era Adj.”, the following screen is displayed. Set the zoom to
the TELE end.
the TELE end.
Fig. 6-1-60
4) If the
[OK]
button is clicked, the following message is dis-
played. Set the subject in accordance with the message.
Fig. 6-1-61
5) Click the
[OK]
button, and the “2. C MOS Linearity Check”
and “3. Release of Data Setting during Camera Adj.” will be
executed.
executed.
6) Upon successful completion of all items of the CAMERA
Adjustment 6, the following message is displayed. Click the
[OK]
button.
Fig. 6-1-62
With the zoom at the TELE end,
the data becomes maximum value.
the data becomes maximum value.
6-28
DSC-R1_ADJ
11. CAMERA Adjustment 7
Note:
Note:
“CAMERA Adjustment 7” is available only once after the
power is turned on. If the adjustment is retried, turn off the
power and turn on again.
power is turned on. If the adjustment is retried, turn off the
power and turn on again.
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Strobe Adj.
3. Auto Focus Illumination Check
4. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Strobe Adj.
3. Auto Focus Illumination Check
4. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the
1) Click the
[Start]
button of the CAMERA Adjustment 7.
2) The Automatic Adjustment Program executes the “1. Data
Setting during Camera Adj.”.
3) Upon successful completion of the “1. Data Setting during
Camera Adj.”, the following screen is displayed. Set the zoom
to the WIDE end.
to the WIDE end.
Fig. 6-1-63
4) If the
[OK]
button is clicked, the following message is dis-
played. Set the subject in accordance with the message.
(For the Flash adjustment box, refer to “3. Preparing the Flash
Adjustment Box” (see page 6-7).)
(For the Flash adjustment box, refer to “3. Preparing the Flash
Adjustment Box” (see page 6-7).)
Fig. 6-1-64
5) Press the
[OK]
button, and the “2. Strobe Adj.” will be ex-
ecuted.
6) During execution of “2. Strobe Adj.”, the following message
is displayed. After checking the flashing of strobe light, click
the
the
[OK]
button. (This message is displayed 2 times during
execution of adjustment.)
Fig. 6-1-65
7) Upon successful completion of “2. Strobe Adj.”, “3. Auto Fo-
cus Illumination Check” is executed. The following messages
are displayed, and then attach the AF illumination axis frame
to the monitor TV screen to make a check in accordance with
the messages.
are displayed, and then attach the AF illumination axis frame
to the monitor TV screen to make a check in accordance with
the messages.
Fig. 6-1-66
8) Upon successful completion of the “3. Auto Focus Illumina-
tion Check”, the “4. Release of Data Setting during Camera
Adj.” will be executed successively.
Adj.” will be executed successively.
9) Upon successful completion of all items of the CAMERA
Adjustment 7, the following message is displayed. Click the
[OK]
button.
Fig. 6-1-67
Check on the monitor TV
Fig. 6-1-68
With the zoom at the WIDE end,
the data becomes minimum value.
the data becomes minimum value.
6-29
DSC-R1_ADJ
11. CAMERA Adjustment 8
Note:
Note:
To detect a high temperature defect in the CAMERA Ad-
justment 8, the camera must be aged for more than 30 min-
utes at the temperature 40
justment 8, the camera must be aged for more than 30 min-
utes at the temperature 40
°
C to 45
°
C. The detection of a
defect will fail unless the aging is performed in the envi-
ronment of exact temperature kept in a range of 40
ronment of exact temperature kept in a range of 40
°
C to
45
°
C.
[Aging method]
1) Click the [Before Aging] button in the CAMERA Adjustment 1.
2) Automatic adjustment program sets the timer to 30 minutes in
1) Click the [Before Aging] button in the CAMERA Adjustment 1.
2) Automatic adjustment program sets the timer to 30 minutes in
the camera.
3) Upon successful completion of setting, the following message
is displayed. Click the [OK] button.
Fig. 6-1-69
4) Disconnect the USB cable from the PC, and then disconnect
the power cord from the AC adaptor. (POWER OFF)
5) Put the camera in the environment of temperature 40
°
C to 45
°
C,
and connect the power cord to the AC adaptor. (POWER ON)
(For the aging environment, see
(For the aging environment, see
“4. Preparation of Aging En-
vironment”
(page 6-8).)
6) In about 3 seconds after the power was turned on, the LCD
screen color will become red and the 30-minute timer will start.
7) After 30 minutes elapsed, the LCD screen color will change
from red to black, indicating the completion of aging.
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. C MOS High Temp. Dark & FD Def.
3. Three Continuos Def. Check
4. C MOS Blinking Def.
5. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. C MOS High Temp. Dark & FD Def.
3. Three Continuos Def. Check
4. C MOS Blinking Def.
5. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Connect the USB cable to the PC.
2) Click the [Start] button in the CAMERA Adjustment 8, and
1) Connect the USB cable to the PC.
2) Click the [Start] button in the CAMERA Adjustment 8, and
the following message will be displayed. If the aging has com-
pleted, click the [OK] button. Or, if the aging is not performed,
click the [Cancel] button to interrupt the adjustment.
pleted, click the [OK] button. Or, if the aging is not performed,
click the [Cancel] button to interrupt the adjustment.
Fig. 6-1-70
3) Click the [OK] button to execute the items from “1. Data Set-
ting during Camera Adj.” to “5. Release of Data Setting dur-
ing Camera Adj.”.
ing Camera Adj.”.
4) Upon successful completion of all items in the CAMERA Ad-
justment 8, the following message is displayed. Click the [OK]
button.
button.
Fig. 6-1-71
6-30
DSC-R1_ADJ
1-5.
LCD SYSTEM ADJUSTMENTS
1-5-1.
Function of Each Button on LCD System
Adjustment Screen
Adjustment Screen
Click the
[LCD SYSTEM ADJUSTMENT]
button on the Main
Menu screen, and the “LCD SYSTEM ADJUSTMENT” screen in
Fig. 6-1-72 will appear.
Fig. 6-1-72 will appear.
Fig. 6-1-72
1
[To Menu]
button
The Main Menu screen comes back.
2
[Start]
button
“LCD Adjustment” starts.
3
[Reset]
button
This button functions same as the Reset button of the camera.
4
[Release Data Setting]
button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the LCD adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the LCD adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
4
3
2
1
1-5-2.
Adjustment Items of LCD System Adjustment
The adjustment items of LCD system adjustment are as listed in
Table 6-1-4. The Automatic Adjustment Program executes the ad-
justment items if the LCD Adjustment Start button is clicked.
Table 6-1-4. The Automatic Adjustment Program executes the ad-
justment items if the LCD Adjustment Start button is clicked.
Button
Adjustment
Signal
Page
Address
Name
VCO adj.
8F
23
LCD
Contrast adj.
Arbitrary
8F
2C
Adjustment V-COM adj.
8F
24
White Balance adj.
8F
28, 2A
Table 6-1-4
Click on the first or last page to see other DSC-R1 (serv.man4) service manuals if exist.