DOWNLOAD Sony DSC-R1 (serv.man3) Service Manual ↓ Size: 366.71 KB | Pages: 5 in PDF or view online for FREE

DSC-R1_L1

2006L0500-1

  © 2006.12

US Model

Canadian Model

AEP Model

UK Model

E Model

Australian Model

Hong Kong Model

Chinese Model

Korea Model

Japanese Model

Tourist Model

The components identified by
mark  0  or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.

Les composants identifiés par une
marque  0  sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.

— 2 —

DSC-R1_L1

Image device

21.5 

× 14.4 mm color CMOS 

sensor, Primary 3-color filter

Total pixel number of camera

Approx. 10 784 000 pixels

Effective pixel number of camera

Approx. 10 286 000 pixels

Lens

Carl Zeiss Vario-Sonnar T

*

5

× zoom lens

f = 14.3 

− 71.5 mm (24 − 

120 mm when converted to a 
35 mm still camera)
F2.8 

− 4.8

Filter diameter: 67 mm

Exposure control Automatic, Shutter speed 

priority, Aperture priority, 
Manual exposure, Scene 
selection (4 modes)

White balance

Automatic, Daylight, Cloudy, 
Fluorescent, Incandescent, 
Flash, One-push

File format (DCF compliant)

Still images: Exif Ver. 2.21
JPEG compliant, RAW (SR2), 
DPOF compatible

Recording media “Memory Stick”

Microdrive
CompactFlash card (TypeI/
TypeII)

Flash

Recommended distance (ISO 
set to Auto): approx. 0.5 m to 
8.5 m (1 feet 7 3/4 inches to 27 
feet 10 3/4 inches) (W)/approx. 
0.4 m to 5.0 m (1 feet 3 3/4 
inches to 16 feet 4 7/8 inches) 
(T)

Viewfinder

Electric viewfinder (color)

VIDEO OUT jack

Minijack
1 Vp-p, 75 

Ω, unbalanced, sync 

negative

ACC jack

Mini-minijack (ø 2.5 mm)

USB jack

mini-B

USB communication

Hi-Speed USB (USB 2.0 
compliant)

LCD panel

5.1 cm (2.0 type) TFT drive

Total number of dots

134 000 (560 

× 240) dots

LCD panel

1.1 cm (0.44 type) TFT drive

Total number of dots

235 200 (980 

× 240) dots

Used battery pack

Rechargeable battery pack 
NP-FM50

Power requirements

7.2 V

Power consumption (during shooting with LCD 

on)
1.7 W

Operating temperature

0

°C to +40°C (+32°F to 

+104

°F)

(When using the Microdrive: 
+5

°C to +40°C (41°F to 

+104

°F))

Storage temperature

−20°C to +60°C (−4°F to 
+140

°F)

Dimensions (lens: W-end)

139.4 

× 97.7 × 156.0 mm

(5 1/2 

× 3 7/8 × 6 1/4 inches)

(W/H/D, excluding protrusions)

Mass

Approx. 1047 g (2 lb 4.9 oz) 
(including NP-FM50 battery 
pack, “Memory Stick”, 
shoulder strap, and lens hood, 
etc.)

Speaker

Dynamic speaker

Exif Print

Compatible

PRINT Image Matching III

Compatible

PictBridge

Compatible

Input rating

100 V to 240 V AC, 50/60 Hz, 
18 W 

Output rating

 8.4 V DC*
* See the label on the AC 

Adaptor for other 
specifications.

Operating temperature range

0

°C to +40°C (32°F to +104°F)

Storage temperature range

-20

°C to +60°C (-4°F to 

+140

°F)

Maximum dimensions

Approx. 56 

× 31 × 100 mm 

(2 1/4 

× 1 1/4 × 4 inches) (W/H/

D), excluding projecting parts

Mass

Approx. 190 g (6.7 oz) 
excluding power cord (mains 
lead)

Used battery

Lithium-ion battery

Maximum voltage 

DC 8.4 V 

Nominal voltage  DC 7.2 V

Capacity 

8.5 Wh (1 180 mAh)

Design and specifications are subject to change 
without notice.

— 3 —

DSC-R1_L1

0

0

0

1.

Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.

2.

Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.

3.

Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.

4.

Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.

5.

Check the B+ voltage to see it is at the values specified.

6.

Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270°C

during repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

— 4 —

DSC-R1_L1

• C: ss: ss

You can reverse the camera
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)

• E: ss: ss

Contact your Sony dealer or local
authorized Sony service facility.

Display Code

  C:32:ss

  C:13:ss

Countermeasure

Turn the power off and on again.

Format the recording medium.

Insert a new recording medium.

Cause

Trouble with hardware.

Unformatted recording medium is inserted.

Recording medium is broken.

Caution Display During Error

SYSTEM ERROR

FORMAT ERROR

MEMORY STICK ERROR,
CF CARD ERROR

  E:61:ss

  E:91:ss

Checking of lens drive circuit.

When failed in the focus and zoom
initialization.

Abnormality when flash is being
charged.

Checking of flash unit or replacement
of flash unit.

—