Sony DSC-R1 (serv.man4) Service Manual ▷ View online
SECTION 6
ADJUSTMENTS
DSC-R1
Revision History
Revision History
Ver. 1.3 2007.08
Link
Link
List of service tools
Adjusting items when replacing main parts and boards
Before starting adjustments
LCD SYSTEM ADJUSTMENTS
EVF SYSTEM ADJUSTMENTS
INITIALIZATION OF DATA
VIDEO SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
ADJUSTMENT PROGRAMS
ERROR
PREPARATIONS BEFORE ADJUSTMENTS
CAMERA SECTION ADJUSTMENTS
SERVICE MODE
SERVICE MODE
Sony EMCS Co.
9-876-898-51
• Use this Service Manual together with the Automatic Adjustment Program (DSC-R1 Auto-Adj Ver_1.3r03.exe)
and the Color Adjustment Program (R1ColorAdjustment.exe).
• Precaution on Replacing the SY-132 board
Auto-ADJ
2007H0500-1
© 2007.8
Published by Kohda TEC
DSC-R1_ADJ
— 2 —
DSC-R1_ADJ
TABLE OF CONTENTS
Section
Title
Page
6.
ADJUSTMENTS
Before Starting Adjustment ······················································· 6-1
1-1.
1-1.
Adjusting Items When Replacing
Main Parts and Boards ···················································· 6-3
Main Parts and Boards ···················································· 6-3
1-2.
List of Service Tools ························································ 6-4
6-1.
Camera Section Adjustments ··········································· 6-5
1-1.
Preparations Before Adjustments ···································· 6-5
1-2.
Adjustment Programs ···················································· 6-10
1-3.
Video System Adjustments ············································ 6-12
1-4.
Camera System Adjustments ········································· 6-14
1-5.
LCD System Adjustments ············································· 6-30
1-6.
EVF System Adjustments ·············································· 6-32
1-7.
Error ··············································································· 6-33
1-8.
Initialization of Data ······················································ 6-35
6-2.
Service Mode ································································· 6-36
6-1
DSC-R1_ADJ
SECTION 6
ADJUSTMENTS
Before starting adjustment
Precaution on Replacing the SY-132 board
•
The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not
required.
required.
•
Perform “VIDEO OUT Default Data Check” mentioned below, and also the adjustment items necessary after SY
Board replacement.
Board replacement.
Ver 1.2 2005.11
6-2
DSC-R1_ADJ
VIDEO OUT Default Data Check
When you replace to the repairing board, the written data of repairing board also might be changed to original setteing
because of broadcast system (NTSC/PAL).
When the data has changed because of board replaceing etc, check the default data of VIDEO OUT if destination code
is right. If not, rewrite to the right value.
because of broadcast system (NTSC/PAL).
When the data has changed because of board replaceing etc, check the default data of VIDEO OUT if destination code
is right. If not, rewrite to the right value.
VIDEO OUT Default Data
Page
Address
Data
NTSC
PAL
4F
8D
00
01
4F
A2
00
01
Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 8D, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 4F, address: A2, and set data: 00 (NTSC) or data: 01 (PAL).
4) Select page: 40, address: 38, and set data: 00.
5) Click
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 8D, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 4F, address: A2, and set data: 00 (NTSC) or data: 01 (PAL).
4) Select page: 40, address: 38, and set data: 00.
5) Click
[Save]
on the SEUS screen.
6) Select page: 80, address: 34, and check that the data is “00”.
7) Select page: 80, address: 30, and check that the data is “00”.
8) Select page: 00, address: 01, and set data: 00.
7) Select page: 80, address: 30, and check that the data is “00”.
8) Select page: 00, address: 01, and set data: 00.
Ver 1.2 2005.11
