DOWNLOAD Sony DSC-F55V (serv.man2) Service Manual ↓ Size: 7.69 MB | Pages: 89 in PDF or view online for FREE

5-18

Adjust the standard LV value.

Mode

STILL

Subject

Clear chart
(Color reproduction adjustment frame)

Measurement Point

Display data of page 1 (Note 2)

Measuring Instrument

Adjustment remote commander

Adjustment Page

F

Adjustment Address

26, 28

Specified Value

0FE0 to 1020

If the data of page: 6, address: 02 is “01”, select page: 6, address:
01, set data: 00, and press the PAUSE button.

Displayed data of page 1 of the adjustment remote commander.

1 : XX : XX

Display data

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 6, address: 01, set data: 0D, and press the PAUSE
button of the adjustment remote commander.
(The light level adjustment is performed and the adjustment
data is stored in page: F, address: 26, 28.)

3)

Select page: 6, address: 02, and check that the data is “01”.

• AE level Check

4)

Select page: 0, address: 03, and set data: 06.

5)

Select page: 1, and check that the display data (Note2) satisfies
the AE level 1 specified value.

Processing after Completing Adjustments:
1)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

2)

Select page: 0, address: 03, and set data: 00.

3)

Select page: 0, address: 01, and set data: 00.

Perform the mixed color cancel adjustment using the each data of
the color bars.

Mode

STILL

Subject

Color bar chart
(Color reproduction adjustment frame)

Adjustment Page

F

Adjustment Address

A0 to A3

This adjustment should be carried out upon completion of “Light
Level Adjustment and ND Shutter Check”.

If the data of page: 6, address: 02 is “01”, select page: 6, address:
01, set data: 00, and press the PAUSE button.

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Check that the picture frame is set to the specified position.
(Refer to “8. Picture Frame Setting”.)

3)

Select page: 6, address: 01, set data: D7, and press the PAUSE
button of the adjustment remote commander.

4)

Select page: 6, address: 01, set data: D5, and press the PAUSE
button.
(The mixed color cancel adjustment is performed and the
adjustment data is stored in page: F, address: A0 to A3.)

Observe the TV monitor and check that a vertical line is indicated
inside each color zone.

5)

Select page: 6, address: 02, and check that the data is “01”.

Processing after Completing Adjustments:
1)

Select page: 6, address: 01, and set data: 00, and press the
PAUSE button.

2)

Select page: 0, address: 01, and set data: 00.

5-19

Adjust the white balance standard data at 3200 K.

Mode

STILL

Subject

Clear chart
(Color reproduction adjustment frame)

Adjustment Page

F

Adjustment Address

3A to 3D, 59

If the data of page: 6, address: 02 is “01”, select page: 6, address:
01, set data: 00, and press the PAUSE button.

After the power is turned on, this adjustment can be done only
once.

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 6, address: 01, set data: 11, and press the PAUSE
button of the adjustment remote commander.

3)

Select page: 6, address: 01, set data: 0B, and press the PAUSE
button.
(The auto white balance standard data input is performed and
the adjustment data is stored in page: F, address: 3A to 3D, 59)

4)

Select page: 6, address: 02, and check that the data is “01”.

Processing after Completing Adjustments:
1)

Select page: 6, address: 01, and set data: 00, and press the
PAUSE button.

2)

Select page: 0, address: 01, and set data: 00.

Adjust to the proper auto white balance output data.
If it is not correct, auto white balance and color reproducibility will
be poor.

Mode

STILL

Subject

Clear chart (Color reproduction
adjustment frame)

Filter

Filter C14 for color temperature
correction

Measurement Point

Display data of page 1 (Note 2)

Measuring Instrument

Adjustment remote commander

Adjustment Page

F

Adjustment Address

3F, 40, 80

Specified Value

R ratio: 28E0 to 2A20
B ratio: 5E60 to 5FA0

This adjustment should be carried out upon completion of “Auto
White Balance Standard Data Input”.

If the data of page: 6, address: 02 is “01”, select page: 6, address:
01, set data: 00, and press the PAUSE button.

After the power is turned on, this adjustment can be done only
once.

Displayed data of page 1 of the adjustment remote commander.

1 : XX : XX

Display data

Adjusting method:
1)

Place the C14 filter for color temperature correction on the
lens.

2)

Select page: 0, address: 01, and set data: 01.

3)

Select page: F, address: 49 to 4C, and note down the data of
each address.

4)

Input the following data to page: F, addresses: 49 to 4C.

Press the PAUSE button of the adjustment remote commander
each time to set the data.

5)

Select page: 6, address: 01, set data: A7, and press the PAUSE
button.

6)

Select page: 6, address: 01, set data: A5, and press the PAUSE
button. (The auto white balance adjustment is performed and
the adjustment data is stored in page: F, address: 3F, 40 and
80.)

7)

Select page: 6, address: 02, and check that the data is “01”.

8)

Select page: 6, address: 01, set data: 3F, and press the PAUSE
button.

9)

Select page: 0, address: 03, and set data: 04.

10) Select page: 1, and check that the display data (Note 4) satisfies

the R ratio specified value.

11) Select page: 0, address: 03, and set data: 05.
12) Select page: 1, and check that the display data (Note 4) satisfies

the B ratio specified value.

13) Select page: F, address: 49 to 4C, and input the data noted down

at step 3).

Press the PAUSE button of the adjustment remote commander
each time to set the data.

Processing after Completing Adjustments:
1)

Select page: 0, address: 03, and set data: 00.

2)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

3)

Select page: 0, address: 01, and set data: 00

49

29

4A

80

4B

5F

4C

00

5-20

Adjust the color Separation matrix coefficient so that proper color
reproduction is produced.

Mode

STILL

Subject

Color bar chart
(Color reproduction adjustment frame)

Adjustment Page

F

Adjustment Address

41 to 48, 5C to 5F

This adjustment should be carried out upon completion of “Auto
White Balance Standard Data Input” and “Auto White Balance
Adjustment”.

If the data of page: 6, address: 02 is “01”, select page: 6, address:
01, set data: 00, and press the PAUSE button.

After the power is turned on, this adjustment can be done only
once.

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Check that the picture frame is set to the specified position.
(Refer to “8. Picture Frame Setting”.)

3)

Select page: B, address: 67, after noting down the data, set
data: 00, and press the PAUSE button.

4)

Select page: 6, address: 01, set data: AB, and press the PAUSE
button.

Observe the TV monitor and check that a sign “   ” is indicated
inside each color zone of the yellow, cyan, red and blue.

5)

Select page: 6, address: 12, set data: 80, and wait for 1 seconds.

6)

Select page: 6, address: 12, set data: 00, and wait for 2 seconds.

7)

Select page: 6, address: 01, set data: A9, and press the PAUSE
button.
(The color reproduction adjustment is performed and the
adjustment data is stored in page: F, address: 41 to 48, 5C to
5F.)

Observe the TV monitor and check that a sign “   ” is indicated
inside each color zone.

8)

Select page: 6, address: 02, and check that the data is “01”.

Processing after Completing Adjustments:
1)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

2)

Select page: B, address: 67, set the data noted down at step 3),
and press the PAUSE button.

3)

Select page: 0, address: 01, and set data: 00

5-21

Mode

STILL

Subject

Color bar chart
(Color reproduction adjustment frame)

Measurement Point

Video output terminal

Measuring Instrument

NTSC vectorscope (NTSC mode)
PAL vectorscope (PAL mode)

Specified Value

Each center of all color luminance
points should settle within each color
reproduction frame.

Menu setting:
1)

VIDEO OUT of SET UP menu

............................ NTSC (NTSC mode)
............................ PAL (PAL mode)

Checking method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 5, address: F1, and set data: FF.

3)

Check that the picture frame is set to the specified position.
(Refer to “8. Picture Frame Setting”.)

4)

Select page: B, address: 67, after noting down the data, set
data: 00, and press the PAUSE button of the adjustment remote
commander.

5)

Select page: 6, address: 10, and set data: 01.

6)

Select page: E, address: 52, after noting down the data, set
data: 0A, and press the PAUSE button.

7)

Select page: 6, address: 01, set data: 0F, and press the PAUSE
button.

8)

Select page: 6, address: 12, set data: 80, and wait for 1 seconds.

9)

Select page: 6, address: 12, set data: 00, and wait for 2 seconds.

10) Adjust the GAIN and PHASE of the vectorscope, and adjust

the burst luminance point to the burst position of the color
reproduction frame.

11) Check that each center of all color luminance points is settled

in each color reproduction frame.

Processing after Completing Adjustments:
1)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

2)

Select page: 6, address: 10, and set data: 00.

3)

Select page: E, address: 52, set the data noted down at step 6)
of “Checking method”, and press the PAUSE button.

4)

Select page: B, address: 67, set the data noted down at step 4)
of “Checking method”, and press the PAUSE button.

5)

Select page: 5, address: F1, and set data: 00.

6)

Select page: 0, address: 01, and set data: 00.

Fig. 5-1-13.

Burst position

Burst position