DOWNLOAD Sony DSC-F55V (serv.man2) Service Manual ↓ Size: 7.69 MB | Pages: 89 in PDF or view online for FREE

E Model

Australian Model

Hong Kong Model

Chinese Model

Tourist Model

Japanese Model

This service manual contains information
for japanese model as well.

Level 2

On the SY-59 board
This service manual provides the information that is premised the circuit board
replacement service and not intended repair inside the SY-59 board.
Therefore, schematic diagram, printed wiring board and electrical parts list of
the SY-59 board are not shown.
The following pages are not shown.

Block diagram ............................... Page 3-9 to 3-16
Schematic diagram ....................... Page 4-9 to 4-34
Printed wiring board ..................... Page 4-35 to 4-36
Electrical parts list ........................ Page 6-8 to 6-14

The above-described information is shown in service manual Level 3.

1/1.8 type color CCD 

f = 6.85 mm 
(37 mm when converted into a 
35 mm still camera) 
F = 2.8 

Automatic exposure 

Automatic, Indoor, Outdoor, 
Hold 

Movie: MPEG1 
Still: JPEG, GIF (in TEXT 
mode), TIFF 
Audio with still image: 
MPEG1 (Monaural) 

“Memory Stick” 

Recommended recording 
distance: 
0.3 m  to  2.5 m

Minijack 
Video: 1 Vp-p, 75

Ω

, 

unbalanced, sync negative 
Audio: 327 mV (at a 47 k

Ω

 

load) 
Output impedance: 2.2 k

Ω

Special minijack

2 type TFT (Thin Film 
Transistor active matrix) drive 

123 200 (560

×

220) dots

NP-FS11 

3.6 V

3.3 W

0

°

C to 40

°

C 

–20

°

C to +60

°

C 

Approx. 103

×

79

×

48 mm 

(w/h/d) 

Approx. 300 g (including 
battery pack NP-FS11, 
“Memory Stick,” lens cap, 
etc.) 

Electret condenser microphone 

Dynamic speaker

100 to 240 V AC, 50/60 Hz 

DC OUT: DC 4.2 V, 1.8 A in 
operating mode
Battery charge terminal:
DC 4.2 V, 1.5 A in charge 
mode

0

°

C to 40

°

C 

–20

°

C to +60

°

C 

49

×

39

×

85 mm (w/h/d) 

Approx. 120 g 

Lithium ion battery 

DC 4.2 V 

DC 3.6 V 

4.1 Wh (1 140 mAh)

A/V connecting cable (1)
NP-FS11 battery pack (1)
AC-VF10 AC power adaptor/
charger (1) 
DK-115 DC connecting cable 
(1)
Power cord (1)
USB cable (1)
Lens cap (1)
Lens cap strap (1)
Wrist strap (1)
“Memory Stick” (8 MB) (1)
CD-ROM (1)
Operating Instructions (1)

Design and specifications are 
subject to change without 
notice.

— 2 —

0

0

1.

Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.

2.

Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.

3.

Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.

4.

Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.

5.

Check the B+ voltage to see it is at the values specified.

6.

Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270˚C

during repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

— 3 —

2-6.

LCD, INVERTER TRANSFORMER UNIT ·················· 2-6

2-7.

LENS ASSEMBLY, FLASH UNIT,
MICROPHONE UNIT ···················································· 2-6

2-8.

CIRCUIT BOARDS LOCATION ··································· 2-7

2-9.

FLEXIBLE BOARDS LOCATION ································ 2-7

3-1.

OVERALL BLOCK DIAGRAM (1/2) ··························· 3-1

3-2.

OVERALL BLOCK DIAGRAM (2/2) ··························· 3-3

3-3.

POWER BLOCK DIAGRAM (1/2) ································ 3-5

3-4.

POWER BLOCK DIAGRAM (2/2) ································ 3-7

4-1.

FRAME SCHEMATIC DIAGRAM ································ 4-1

4-2.

PRINTED WIRING BOARDS AND SCHEMATIC
DIAGRAMS ···································································· 4-4

• CD-264 (CCD IMAGER)

PRINTED WIRING BOARD ························· 4-5

• CD-264 (CCD IMAGER)

SCHEMATIC DIAGRAM ······························ 4-7

• CONTROL SWITCH BLOCK (MS/HF)

SCHEMATIC DIAGRAM ···························· 4-37

• DD-143 (DC/DC CONVERTER)

SCHEMATIC DIAGRAM ···························· 4-39

• DD-143 (DC/DC CONVERTER)

PRINTED WIRING BOARD ······················· 4-41

4-3.

WAVEFORMS ······························································ 4-43

4-4.

MOUNTED PARTS LOCATION ································· 4-48

1.

Before starting adjustment ··············································· 5-1

1-1.

Adjusting items when replacing main parts and boards ·· 5-2

5-1.

ADJUSTMENTS ····························································· 5-3

1-1.

PREPARATIONS BEFORE ADJUSTMENT ················· 5-3

1-1-1. List of Service Tools ························································ 5-3
1-1-2. Preparations ····································································· 5-4
1-1-3. Discharging of the strobe power supply ·························· 5-4
1-1-4. Precaution ········································································ 5-6
1.

Setting the Switch ···························································· 5-6

2.

Order of Adjustments ······················································ 5-6

3.

Subjects ··········································································· 5-6

1-2.

INITIALIZATION OF B, D, E, F, 7 PAGE DATA ········· 5-7

1-2-1. INITIALIZATION OF D PAGE DATA ·························· 5-7
1.

Initializing the D Page Data ············································ 5-7

2.

Modification of D Page Data ··········································· 5-7

3.

D Page Table ···································································· 5-7

1-2-2. Initializing the B, E, F, 7 Page Data ································ 5-8
1.

Initializing the B, E, F, 7 Page Data ································ 5-8

2.

Modification of B, E, F, 7 Page Data ······························· 5-8

3.

F Page Table ···································································· 5-9

4.

7 Page Table ··································································· 5-10

5.

E Page Table ·································································· 5-11

6.

B Page Table ·································································· 5-11

1-3.

VIDEO SYSTEM ADJUSTMENTS ····························· 5-12

1.

Video Output Level Adjustment (SY-59 board) ············ 5-12

1-4.

CAMERA SYSTEM ADJUSTMENTS ························ 5-13

1.

HALL Adjustment ························································· 5-13

2.

Flange Back Adjustment (Using Minipattern Box) ······· 5-14

····································································· 5

Getting started

Identifying the parts ······························································· 1-1
Preparing the power supply ··················································· 1-1
Setting the date and time ························································ 1-2
Inserting the “Memory Stick” ················································ 1-3

Basic operations
B Recording

Recording still images ··························································· 1-3
Recording moving images ····················································· 1-4

B Playback

Playing back still images ······················································· 1-4
Playing back moving images ················································· 1-4
Viewing images using a personal computer ·························· 1-5
Image file storage destinations and image files ····················· 1-6

Advanced operations
Before performing advanced operations

How to use the MODE selector ············································· 1-6
How to use the control button ················································ 1-6
How to change the menu settings ·········································· 1-7
Menu settings ········································································· 1-7

B Various recording

Rotating the LCD screen — Face-to-Face recording ············ 1-8
Setting the image size (IMAGE SIZE) ·································· 1-8
Recording still images for e-mail (E-MAIL) ························· 1-8
Adding audio files to still images (VOICE) ·························· 1-9
Recording text documents (TEXT) ······································· 1-9
Recording uncompressed images (TIFF) ······························· 1-9
Recording images in macro ··················································· 1-9
Setting the distance to the subject ·········································· 1-9
Using the PROGRAM AE function ······································· 1-9
Adjusting the exposure (EXPOSURE) ·································· 1-9
Adjusting the white balance (WHITE BALANCE) ············ 1-10
Recording the date and time on the still image
(DATE/TIME) ······································································ 1-10
Enjoying picture effects (P.EFFECT) ·································· 1-10

B Various playback

Playing back six images at once (INDEX) ·························· 1-10
Enlarging a part of the still image (Zoom and trimming) ···· 1-10
Rotating a still image (ROTATE) ········································· 1-11
Playing back the images in order (SLIDE SHOW) ············· 1-11
Viewing images on a TV screen ·········································· 1-11

B Editing

Preventing accidental erasure (PROTECT) ························· 1-11
Deleting images (DELETE) ················································ 1-11
Changing the recorded still image size (RESIZE) ··············· 1-12
Copying images (COPY) ····················································· 1-12
Selecting still images to print (PRINT MARK) ·················· 1-12

Additional information

Precautions ··········································································· 1-12
On “Memory Sticks” ··························································· 1-13
Using your camera abroad ··················································· 1-13
Troubleshooting ··································································· 1-13
Warning and notice messages ·············································· 1-14
Self-diagnosis display ·························································· 1-14
LCD screen indicators ························································· 1-15

2-1.

CABINET (FRONT) ASSEMBLY, CHECK COVER ···· 2-1

2-2.

DD-143 BOARD ····························································· 2-2

2-3.

CAMERA BLOCK ASSEMBLY ···································· 2-2

2-4.

SY-59 BOARD ································································ 2-3

2-5.

LCD PANEL BLOCK, SPEAKER (2.0CM),
CONTROL SWITCH BLOCK (MS)/(HF) ····················· 2-5

— 4 —

3.

Flange Back Adjustment
(Using Flange Back Adjustment Chart) ························ 5-15

4.

Flange Back Check ························································ 5-15

5.

F No. Standard Data Input ············································· 5-15

6.

Mechanical Shutter Adjustment ···································· 5-16

7.

Picture Frame Setting ···················································· 5-17

8.

Light Level Adjustment and ND Shutter Check ············ 5-18

9.

Mixed Color Cancel Adjustment ··································· 5-18

10.

Auto White Balance Standard Data Input ····················· 5-19

11.

Auto White Balance Adjustment ··································· 5-19

12.

Color Reproduction Adjustment ···································· 5-20

13.

Color Reproduction Check ············································ 5-21

14.

White Balance Check ···················································· 5-22

15.

Strobe White Balance Adjustment ································· 5-23

16.

Strobe Light Level and White Balance Check ·············· 5-23

17.

CCD Black Defect Compensation ································· 5-24

18.

CCD White Defect Compensation ································ 5-24

1-5.

LCD SYSTEM ADJUSTMENT ··································· 5-25

1.

LCD Initial Data Input ·················································· 5-25

2.

VCO Adjustment (SY-59 board) ··································· 5-26

3.

D Range Adjustment (SY-59 board) ······························ 5-26

4.

Bright Adjustment (SY-59 board) ·································· 5-27

5.

Contrast Adjustment (SY-59 board) ······························ 5-27

6.

Color Adjustment (SY-59 board) ··································· 5-28

7.

V-COM Level Adjustment (SY-59 board) ····················· 5-28

8.

V-COM Adjustment (SY-59 board) ······························· 5-29

9.

White Balance Adjustment (SY-59 board) ···················· 5-29

1-6.

SYSTEM CONTROL SYSTEM ADJUSTMENT ········ 5-30

1.

Battery End Adjustment (SY-59 board) ························· 5-30

5-2.

SERVICE MODE ·························································· 5-31

2-1.

ADJUSTMENT REMOTE COMMANDER ················ 5-31

1.

Using the Adjustment Remote Commander ·················· 5-31

2.

Precautions Upon Using the Adjustment Remote
Commander ··································································· 5-31

2-2.

DATA PROCESS ··························································· 5-32

2-3.

SERVICE MODE ·························································· 5-33

1.

Setting the Test Mode ···················································· 5-33

2.

Bit Value Discrimination ··············································· 5-33

3.

Emergency Memory Address of Flash Unit ·················· 5-33

4.

Record of Use check ······················································ 5-34

5.

Self Diagnostics Log check ··········································· 5-34

6.

Switch check (1) ···························································· 5-35

7.

Switch check (2) ···························································· 5-35

8.

LED check ····································································· 5-35

9.

Position sensor check (SY-59 board SE401) ················· 5-36

6-1.

EXPLODED VIEWS ······················································ 6-1

6-1-1. OVERALL SECTION ····················································· 6-1
6-1-2. CABINET (FRONT) SECTION ····································· 6-2
6-1-3. CAMERA BLOCK SECTION ······································· 6-3
6-1-4. CABINET (REAR) SECTION ······································· 6-4
6-2.

ELECTRICAL PARTS LIST ·········································· 6-5

*

Color reproduction frame is shown on page 105.