DOWNLOAD Sony DSC-F505 Service Manual ↓ Size: 5.17 MB | Pages: 127 in PDF or view online for FREE

Fig. 5-1-14.

Fig. 5-1-15.

Fig. 5-1-16.

Mode

STILL

Subject

Color bar chart
(Color reproduction adjustment frame)
(Approx. 90cm from the front of the lens)

Measurement Point

Video output terminal

Measuring Instrument

Oscilloscope and TV monitor

Specified Value

A=B, C=D, E=F

Setting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 5, address: F1, and set data: FF.

3)

Adjust the zoom, the direction and the distance between the pattern
box and camera, and set the picture frame to the specified position.

4)

Mark the position of the picture frame on the monitor display,
and adjust the picture frame to this position in following
adjustments using “Color reproduction adjustment frame”.
(Press the shutter and check with image input.)

5)

Select page: 5, address: F1, and set data: 00.

6)

Select page: 0, address: 01, and set data: 00.

A=B

C=D

A

B

C

D

E=F

V

E

F

Color bar chart picture frame

Monitor TV picture frame

Compensate the unevenness of the iris meter sensitivity.

Mode

STILL

Subject

Clear chart
(Color reproduction adjustment frame)

Adjustment Page

F

Adjustment Address

29 to 2C

Check that the data of page: 6, address: 02 is “00”. If not, turn the
power of the unit OFF/ON.

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 5, address: F1, and set data: FF.

3)

Select page: 6, address: 01, set data: BB, and press the PAUSE
button of the adjustment remote commander.
(The F No. standard data input is performed and the adjustment
data is stored in page: F, address: 29 to 2C.)

4)

Select page: 6, address: 02, and check that the data is “01”.

Processing after Completing Adjustments:
1)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

2)

Select page: 5, address: F1, and set data: 00.

3)

Select page: 0, address: 01, and set data: 00.

Adjust the period which the mechanical shutter is closed, and
compensate the exposure.

Mode

STILL

Subject

Clear chart
(Focused at the WIDE end and Color
reproduction adjustment frame)

Adjustment Page

F

Adjustment Address

5A, 6C to 7F

Check that the data of page: 6, address: 02 is “00”. If not, turn the
power of the unit OFF/ON.

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 5, address: F1, and set data: FF.

3)

Select page: 6, address: 01, set data: AD, and press the PAUSE
button of the adjustment remote commander.
(The mechanical shutter adjustment is performed and the
adjustment data is stored in page: F, address: 5A, 6C to 7F.)

4)

Select page: 6, address: 02, and check that the data changes to
“01”.

5)

Check page: 6, address AB. The adjustment has been performed
correctly if the data is 00 and incorrectly if other than 00.

Processing after Completing Adjustments:
1)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

2)

Select page: 5, address: F1, and set data: 00.

3)

Select page: 0, address: 01, and set data: 00.

Adjust the standard LV value.

Mode

STILL

Subject

Clear chart
(Color bar standard picture frame)

Measurement Point

Display data of page 1 (Note 2)

Measuring Instrument

Adjustment remote commander

Adjustment Page

F

Adjustment Address

26, 28

Specified Value

AE level 1: 0FE0 to 1020
AE level 2: Below 1100

Check that the data of page: 6, address: 02 is “00”. If not, turn the
power of the unit OFF/ON.

Displayed data of page 1 of the adjustment remote commander.

1 : XX : XX

Display data

Adjusting method:
1)

Select page: 0, address: 01, set data: 01 and press the PAUSE
button.

2)

Select page: 5, address: F1, and set data: FF.

3)

Select page: 6, address: 01, set data: 0D, and press the PAUSE
button of the adjustment remote commander.
(The light level adjustment is performed and the adjustment
data is stored in page: F, address: 26, 28.)

4)

Select page: 6, address: 02, and check that the data is “01”.

5)

Select page: 0, address: 03, set data: 06, and press the PAUSE
button.

6)

Select page: 1, and check that the display data (Note 2) satisfies
the AE level 1

7)

Select page: E, address: 41, set data: 6B, and press the PAUSE
button.

8)

Select page: 6, address: 1C, set data: 03, and press the PAUSE
button.

9)

Select page: 1, and check that the display data (Note 2) satisfies
the AE level 2.

Processing after Completing Adjustments:
1)

Select page: 6, address: 01, and set data: 00.

2)

Select page: E, address: 41, set data: 6A, and press the PAUSE
button.

3)

Select page: 6, address: 1C, and set data: 00.

4)

Select page: 0, address: 03, and set data: 00.

5)

Select page: 5, address: F1, and set data: 00.

6)

Select page: 0, address: 01, and set data: 00.

Adjust the AGC standard gain and max gain.

Mode

STILL

Subject

Clear chart
(Color bar standard picture frame)

Adjustment Page

E

F

Adjustment Address

4F

27

Check that the data of page: 6, address: 02 is “00”. If not, turn the
power of the unit OFF/ON.

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 5, address: F1, and set data: FF.

3)

Select page: 6, address: 98, and set data: C0.

4)

Select page: 6, address: 99, and set data: 26.

5)

Select page: 6, address: 01, and set data: C7, and press the
PAUSE button of remote commander. (The AGC gain
adjustment is performed and the adjustment data is stored in
page: E, address: 4F, and page: F, address 27.)

6)

Select page: 6, address: 02, and check that the data is “01”.

Processing after Completing Adjustments:
1)

Select page: 6, address: 98, and set data: 00.

2)

Select page: 6, address: 99, and set data: 00.

3)

Select page: 6, address: 01, and set data: 00, and press the
PAUSE button.

4)

Select page: 5, address: F1, and set data: 00.

5)

Select page: 0, address: 01, and set data: 00.

Adjust the white balance standard data at 3200K.

Mode

STILL

Subject

Clear chart
(Color bar standard picture frame)

Adjustment Page

F

Adjustment Address

3A to 3D, 59

Check that the data of page: 6, address: 02 is “00”. If not, turn the
power of the unit OFF/ON.

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 5, address: F1, and set data: FF.

3)

Select page: B, address: 41, and set data: 30.

4)

Select page: F, address: 37, and set data: 9B.

5)

Select page: 6, address: 01, set data: 11, and press the PAUSE
button.

6)

Select page: 6, address: 01, set data: 0B, and press the PAUSE
button.
(The auto white balance standard data input is performed and
the adjustment data is stored in page: F, address: 3A to 3D,
59.)

7)

Select page: 6, address: 02, and check that the data is “01”.

Processing after Completing Adjustments:
1)

Select page: B, address: 41, and set data: 00.

2)

Select page: 6, address: 01, and set data: 00.

3)

Select page: F, address: 37, set data: 93, and press the PAUSE
button.

4)

Select page: 5, address: F1, and set data: 00.

5)

Select page: 0, address: 01, and set data: 00.

Adjust to the proper auto white balance output data with Built-in
ND filter.
If it is not correct, auto white balance and color reproducibility will
be poor.

Mode

STILL

Subject

Clear chart
(Color reproduction adjustment frame)

Filter

Built-in ND filter

Adjustment Page

F

Adjustment Address

4F, 50

Perform “Auto White Balance Standard Data Input” before this
adjustment.

Check that the data of page: 6, address: 02 is “00”. If not, turn the
power of the unit OFF/ON.

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 5, address: F1, and set data: FF.

3)

Select page: B, address: 41, set data: 30, and press the PAUSE
button.

4)

Select page: 6, address: 1C, set data: 03, press PAUSE button
and wait for one second.

5)

Select page: F, address: 37, and set data: 9B.

6)

Select page: 6, address: 01, set data: 11, and press the PAUSE
button.

7)

Select page: 6, address: 01, set data: 09, and press the PAUSE
button.
(The auto white balance adjustment ND filter compensation is
performed and the adjustment data is stored in page: F, address:
4F and 50.)

8)

Select page: 6, address: 02, and check that the data is “01”.

Processing after Completing Adjustments:
1)

Select page: B, address: 41, and set data: 00.

2)

Select page: 6, address: 1C, set data: 00, and press the PAUSE
button.

3)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

4)

Select page: F, address: 37, set data: 93, and press the PAUSE
button.

5)

Select page: 5, address: F1, and set data: 00.

6)

Select page: 0, address: 01, and set data: 00.

Processing after Completing Adjustments:
1)

Select page: 0, address: 03, and set data: 00.

2)

Select page: B, address: 41, set data: 00, and press the PAUSE
button.

3)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

4)

Select page: F, address: 37, set data: 93, and press the PAUSE
button.

5)

Select page: 5, address: F1, and set data: 00.

6)

Select page: 0, address: 01, and set data: 00.

Adjust to the proper auto white balance output data.
If it is not correct, auto white balance and color reproducibility will
be poor.

Mode

STILL

Subject

Clear chart
(Color reproduction adjustment frame)

Filter

Filter C14 for color temperature
correction

Measurement Point

Display data of page 1 (Note 3)

Measuring Instrument

Adjustment remote commander

Adjustment Page

F

Adjustment Address

3F, 40, 80

Specified Value

R ratio: 29E0 to 2B20 (Center: 2A80)
B ratio: 5F20 to 6060 (Center: 5FC0)

Perform “Auto White Balance ND Filter Compensation
Adjustment” and “Auto White Balance Standard Data Input” before
this adjustment.

Check that the data of page: 6, address: 02 is “00”. If not, turn the
power of the unit OFF/ON.

Displayed data of page 1 of the adjustment remote commander.

1 : XX : XX

Display data

Adjusting method:
1)

Place the C14 filter for color temperature correction on the
lens.

2)

Select page: 0, address: 01, and set data: 01.

3)

Select page: 5, address: F1, and set data: FF.

4)

Select page: B, address: 41, set data: 30, and press the PAUSE
button.

5)

Select page: F, address: 37, set data: 9B, and press the PAUSE
button.

6)

Select page: 6, address: 01, set data: A7, and press the PAUSE
button.

7)

Select page: F, address: 49 to 4C, and note down the data of
each address.

8)

Input the following data to page: F, addresses: 49 to 4C.

Press the PAUSE button of the adjustment remote commander
each time to set the data.

9)

Select page: 6, address: 01, set data: A5, and press the PAUSE
button.
(The auto white balance adjustment is performed and the
adjustment data is stored in page: F, address: 3F, 40 and 80.)

10) Select page: 6, address: 02, and check that the data is “01”.
11) Select page: 6, address: 01, set data: 3F, and press the PAUSE

button.

12) Select page: 0, address: 03, and set data: 04.
13) Select page: 1, and check that the display data (Note3) satisfies

the R ratio specified value.

14) Select page: 0, address: 03, and set data: 05.
15) Select page: 1, and check that the display data (Note3) satisfies

the B ratio specified value.

16) Select page: F, address: 49 to 4C, and input the data noted down

at step 7).

After setting each data, be sure to press the PAUSE button of
the adjustment remote commander.

49

2A

4A

80

4B

5F

4C

C0