Sony XAV-W600 / XAV-W650BT Service Manual ▷ View online
XAV-W600/W650BT
25
SECTION 4
ELECTRICAL ADJUSTMENT
MONITOR SECTION
If any of the following parts was replaced, execute the “Flicker
Adjustment” as mentioned below.
• CHASSIS MAIN ASSY (Including MAIN board)
• FRONT PANEL ASSY (Including LCD module, Touch panel)
• COMPLETE KEY BOARD
Adjustment” as mentioned below.
• CHASSIS MAIN ASSY (Including MAIN board)
• FRONT PANEL ASSY (Including LCD module, Touch panel)
• COMPLETE KEY BOARD
Preparation:
• Remote commander (RM-X170)
• Remote commander (RM-X170)
FLICKER ADJUSTMENT
1. Turn the power on, and perform the aging more than fi ve min-
1. Turn the power on, and perform the aging more than fi ve min-
utes.
2. In the state of source off (Home screen is displayed), pressing
the buttons on the remote commander in order of the [4]
→ [5]
→ [4] (press only the [4] button for two seconds).
The test mode 4 starts, and the following screen is displayed on
the monitor.
the monitor.
(Displayed colors/values in the following fi gure are example)
PAL_SEL:0
SWAP:0
VCOM:064
TEST 4
3. Press the [B] button on the remote commander to set the
“PAT_SEL:9”.
4. Press the [b] button on the remote commander to set the
“SWAP:0”.
5. Press the [V] or [v] button on the remote commander to adjust
so that the fl icker becomes minimum in the sight.
(There is a point most suitable in the range of VCOM:045 to
VCOM:090)
VCOM:090)
The relation between the fl icker and the adjustment value has
the characteristic such as the following fi gure.
the characteristic such as the following fi gure.
Example of characteristic:
Flicker
VCOM value
bad
o
m
good
6. Press the [PUSH SOURCE/ DSPL] (XAV-W600) or [PUSH
SOURCE/ VOICE] (XAV-W650BT) button on the main unit,
and turn the power off.
and turn the power off.
26
XAV-W600/W650BT
not supplied
FP1
ANT1
chassis section
FFC1
DVM1
6
6
7
2
2
2
2
3
4
4
4
4
5
PW1
#1
#1
(W650BT)
F1
#1
#1
#1
#1
#1
#1
NFC1
1
(W600)
(W650BT)
SECTION 5
EXPLODED VIEWS
Note:
• -XX and -X mean standardized parts, so
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice. Some delay should be anticipated
when ordering these items.
vice. Some delay should be anticipated
when ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
plied.
• Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
Parts Color Cabinet’s Color
5-1. OVERALL SECTION
Note 1: When the VOL knob assy (Ref. No. NFC1) is re-
placed, Bluetooth information writing is necessary.
Refer to “BLUETOOTH INFORMATION WRIT-
ING METHOD” on page 7. (XAV-W650BT only)
Refer to “BLUETOOTH INFORMATION WRIT-
ING METHOD” on page 7. (XAV-W650BT only)
Note 2: When the complete KEY board (Ref. No. 3) and
front panel assy (Ref. No. FP1) are replaced, refer to
“FLICKER ADJUSTMENT” on page 25.
“FLICKER ADJUSTMENT” on page 25.
The components identifi ed by mark 0
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
Les composants identifi és par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
1
A-2018-260-A VOL KNOB ASSY (W600)
2
9-885-192-54 SCREW +K M2X3.5 (EP-FE/ZNBK/CM)
3
A-2087-423-A KEY BOARD, COMPLETE (Including Bracket,
Insulating sheet) (W650BT: US, CND) (See Note 2)
3
A-2087-424-A KEY BOARD, COMPLETE (Including Bracket,
Insulating sheet) (W600: E (NTSC)/W650BT: AEP,
UK, E (NTSC), E (PAL), EA, IND, AUS)
(See Note 2)
3
A-2087-425-A KEY BOARD, COMPLETE (Including Bracket,
Insulating sheet) (W650BT: IND3) (See Note 2)
3
A-2090-037-A KEY BOARD, COMPLETE (Including Bracket,
Insulating sheet) (W600: RU, E (PAL),
EA, IND, AUS) (See Note 2)
3
A-2090-038-A KEY BOARD, COMPLETE (Including Bracket,
Insulating sheet) (W600: IND3) (See Note 2)
4
9-885-204-56 SCREW +B 2X8 TYPE2 (EP-FE/ZNBK)
5
9-885-192-50 SHEET (PROTECTION, KEY)
6
9-885-192-55 SCREW +B M2X3.5 (EP-FE/ZN/CM2)
7
A-2058-326-A GUIDE
ASSY
ANT1 9-885-197-32 BT
ANT
(W650BT)
0 DVM1
A-2090-036-B DVD DECK ASSY (DR28N-ABB-YG)
(Including DVD board, Bracket)
F1
9-885-192-49 MINI FUSE (BLADE TYPE) (10 A)
FFC1
9-885-204-55 FFC (DECK TO MAIN MT, SJ-V091)
FP1
A-2087-415-A PANEL ASSY, FRONT (Including LCD module,
Touch panel) (W650BT: E (NTSC)) (See Note 2)
FP1
A-2087-416-A PANEL ASSY, FRONT (Including LCD module,
Touch panel) (W650BT: Except E (NTSC))
(See Note 2)
FP1
A-2087-417-A PANEL ASSY, FRONT (Including LCD module,
Touch panel) (W600: E (NTSC)) (See Note 2)
FP1
A-2087-418-A PANEL ASSY, FRONT (Including LCD module,
Touch panel) (W600: Except E (NTSC))
(See Note 2)
NFC1
A-2087-419-A VOL KNOB ASSY (Including NFC module)
(W650BT) (See Note 1)
PW1
1-846-035-11 CONNECTION CABLE (ISO) (POWER)
(AEP, RU, UK)
PW1
1-846-039-11 CONNECTION CABLE, AUTOMOBILE (POWER)
(US, CND, E (NTSC), E (PAL),
EA, IND, IND3, AUS)
#1
7-685-791-01 SCREW +PTT 2.6X5 (S)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
27
XAV-W600/W650BT
5-2. CHASSIS SECTION
not supplied
BTM1
51
CHA1
#1
(W650BT)
Note 1:
When the complete BT board (Ref. No. 51) is replaced,
Bluetooth information writing is necessary. Refer to “BLUE-
TOOTH INFORMATION WRITING METHOD” on page 7.
(XAV-W650BT only)
TOOTH INFORMATION WRITING METHOD” on page 7.
(XAV-W650BT only)
Note 2:
When the chassis main assy (Ref. No. CHA1) is replaced, re-
fer to “FLICKER ADJUSTMENT” on page 25.
fer to “FLICKER ADJUSTMENT” on page 25.
Note 3:
When complete BT board (Ref. No. 51) is replaced, replaced
old complete BT board is destroyed with the hammer, and
throw out it. (XAV-W650BT only)
old complete BT board is destroyed with the hammer, and
throw out it. (XAV-W650BT only)
Note 4:
When the chassis main assy (Ref. No. CHA1) is replaced, re-
fer to “DESTINATION SETTING METHOD” on page 5.
fer to “DESTINATION SETTING METHOD” on page 5.
Note 5:
When the complete BT board (Ref. No. 51) is replaced, be
sure to replace the VOL knob assy (Ref. No. NFC1) simulta-
neously. (XAV-W650BT only)
sure to replace the VOL knob assy (Ref. No. NFC1) simulta-
neously. (XAV-W650BT only)
51
A-2087-410-A BT BOARD, COMPLETE (W650BT)
(See Note 1, 3, 5)
BTM1
9-885-197-33 BT MIC (CABLE) (W650BT)
CHA1
A-2087-402-A CHASSIS MAIN ASSY (Including MAIN board,
Flexible fl at cable) (W650BT: US, CND)
(See Note 2, 4)
CHA1
A-2087-403-A CHASSIS MAIN ASSY (Including MAIN board,
Flexible fl at cable) (W650BT: Except US,
CND, IND3) (See Note 2, 4)
CHA1
A-2087-404-A CHASSIS MAIN ASSY (Including MAIN board,
Flexible fl at cable) (W600: Except IND3)
(See Note 2, 4)
CHA1
A-2087-902-A CHASSIS MAIN ASSY (Including MAIN board,
Flexible fl at cable) (W650BT: IND3)
(See Note 2, 4)
CHA1
A-2087-903-A CHASSIS MAIN ASSY (Including MAIN board,
Flexible fl at cable) (W600: IND3) (See Note 2, 4)
#1
7-685-791-01 SCREW +PTT 2.6X5 (S)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
XAV-W600/W650BT
28
SECTION 6
ACCESSORIES
ACCESSORIES
************
1-487-638-13 REMOTE COMMANDER (RM-X170)
(W600: E (NTSC), IND, IND3/W650BT)
4-577-696-12 MANUAL,
INSTRUCTION
(ENGLISH, FRENCH, SPANISH) (US, CND)
4-577-696-22 MANUAL, INSTRUCTION (ENGLISH, SPANISH)
(E (NTSC))
4-577-696-32 MANUAL, INSTRUCTION (ENGLISH)
(E (PAL), EA, IND, IND3, AUS)
4-577-696-42 MANUAL, INSTRUCTION (ARABIC, PERSIAN)
(EA)
4-577-696-52 MANUAL,
INSTRUCTION
(ENGLISH, SPANISH, ITALIAN) (AEP, UK)
4-577-696-62 MANUAL,
INSTRUCTION
(FRENCH, GERMAN, DUTCH) (AEP, UK)
4-577-696-71 MANUAL,
INSTRUCTION
(RUSSIAN, UKRAINIAN) (RU)
************************************************************
PARTS FOR INSTALLATION AND CONNECTIONS
**************************************
501
X-2588-296-1 FITTING FRAME ASSY (AEP, UK)
502
4-464-557-01 TRIM-PLATE (AEP, UK)
503
4-479-204-01 RELEASE KEY (1 piece) (AEP, UK)
504
3-934-325-21 SCREW, +K (5X8) TAPPING (1 piece)
505
1-846-035-11 CONNECTION CABLE (ISO) (POWER)
(AEP, RU, UK)
505
1-846-039-11 CONNECTION CABLE, AUTOMOBILE (POWER)
(US, CND, E (NTSC), E (PAL),
EA, IND, IND3, AUS)
506
A-2018-274-A COLLAR ASSY (RU, IND, IND3)
507
1-542-986-11 MICROPHONE UNIT (Including Double-sided tape)
(W650BT)
(AEP, RU, UK)
(US, CND, E (NTSC), E (PAL),
EA, IND, IND3, AUS)
EA, IND, IND3, AUS)
POWER CORD (ISO)
u1
505
506
504
POWER CORD
u1
505
COLLAR ASSY
u1
+K5
u8
u6
MICROPHONE UNIT
u1
MICROPHONE
u1
DOUBLE-SIDED TAPE
u1
507
(RU, IND, IND3)
501
503
FITTING FRAME ASSY
u1
502
TRIM PLATE
u1
RELEASE KEY
u2
(W650BT)
(AEP, UK)
Click on the first or last page to see other XAV-W600 / XAV-W650BT service manuals if exist.