Sony XAV-W600 / XAV-W650BT Service Manual ▷ View online
XAV-W600/W650BT
13
To capture your voice during handsfree calling, you
need to install the microphone ʕ.
need to install the microphone ʕ.
Installing the microphone
ʖ
ʕ
Clip (not supplied)
ʕ
Installation
When mounting in a Japanese car, see “Mounting
the unit in a Japanese car” (page 37).
the unit in a Japanese car” (page 37).
Mounting the unit with an installation kit
(not supplied)
(not supplied)
Before installing, make sure the catches on both
sides of the bracket are bent inwards 3.5 mm (
sides of the bracket are bent inwards 3.5 mm (
5
/
32
in).
1
Position the bracket inside the
dashboard, then bend the claws outward
for a tight fit.
dashboard, then bend the claws outward
for a tight fit.
2
Mount the unit onto the bracket.
Note
If the catches are straight or bent outwards, the unit will
not be installed securely and may spring out.
If the catches are straight or bent outwards, the unit will
not be installed securely and may spring out.
Mounting the unit in the dashboard
Catch
Bracket
Larger than
182 mm (7
182 mm (7
1
/
4
in)
Larger than
111 mm (4
111 mm (4
3
/
8
in)
Bracket
Cautions
ˎ It is extremely dangerous if the cord becomes
wound around the steering column or gearstick.
Be sure to keep it and other parts from interfering
with your driving operations.
Be sure to keep it and other parts from interfering
with your driving operations.
ˎ If airbags or any other shock-absorbing
equipment are in your car, contact the store
where you purchased this unit, or the car dealer,
before installation.
where you purchased this unit, or the car dealer,
before installation.
Note
Before attaching the double-sided tape ʖ, clean the
surface of the dashboard with a dry cloth.
Before attaching the double-sided tape ʖ, clean the
surface of the dashboard with a dry cloth.
When using the steering wheel remote
control
control
Installation of the connection cable RC-SR1 (not
supplied) is required before use.
supplied) is required before use.
1
To enable the steering wheel remote control, select
[General Settings] q [User Defined] to make the
registration (page 19).
When the registration is complete, the steering
wheel remote control becomes available.
[General Settings] q [User Defined] to make the
registration (page 19).
When the registration is complete, the steering
wheel remote control becomes available.
Notes on installing the connection cable RC-SR1 (not
supplied)
supplied)
ˎ Refer to the support sites on the back cover for
details, then connect each lead properly to the
appropriate leads. Making an improper connection
may damage the unit.
appropriate leads. Making an improper connection
may damage the unit.
ˎ Consulting the dealer or an experienced technician
for help is recommended.
When using the wired remote control
1
To enable the wired remote control, set [Steering
Control] in [General Settings] to [Preset] (page 19).
Control] in [General Settings] to [Preset] (page 19).
Installation of the rearview camera (not supplied) is
required before use.
The image of a rearview camera connected to the
CAMERA IN terminal is displayed when:
required before use.
The image of a rearview camera connected to the
CAMERA IN terminal is displayed when:
ˋ the back lamp of your car lights up (or the shift
lever is set to the R (reverse) position).
ˋ you press HOME, then touch [Rear Camera].
ˋ you press and hold DSPL then touch [Rear
Camera] if [SOURCE Key Func.] is set to [DSPL]
Using the wired remote control
Using the rearview camera
.
.
.
.
When replacing the fuse, be sure to
use one matching the amperage
rating stated on the original fuse. If
the fuse blows, check the power
connection and replace the fuse. If
the fuse blows again after
replacement, there may be an
internal malfunction. In such a case, consult your
nearest Sony dealer.
use one matching the amperage
rating stated on the original fuse. If
the fuse blows, check the power
connection and replace the fuse. If
the fuse blows again after
replacement, there may be an
internal malfunction. In such a case, consult your
nearest Sony dealer.
Fuse replacement
Fuse (10 A)
Mounting the unit in a Japanese car
You may not be able to install this unit in some
Japanese cars. In such a case, consult your Sony
dealer.
Japanese cars. In such a case, consult your Sony
dealer.
When mounting this unit to the preinstalled
brackets of your car, use the supplied screws ʔ in
the appropriate screw holes based on your car: T
for TOYOTA, M for MITSUBISHI and N for NISSAN.
brackets of your car, use the supplied screws ʔ in
the appropriate screw holes based on your car: T
for TOYOTA, M for MITSUBISHI and N for NISSAN.
Note
To prevent a malfunction, install only with the supplied
screws ʔ.
To prevent a malfunction, install only with the supplied
screws ʔ.
ʔ
To the dashboard/center console
Parts supplied with your
car
car
ʔ
Bracket
Bracket
XAV-W600/W650BT
14
(AEP, UK)
Cautions
ˎ Run all ground (earth) leads to a common
ground (earth) point.
ˎ Do not get the leads trapped under a screw or
caught in moving parts (e.g., seat railing).
ˎ Before making connections, turn the car ignition
off to avoid short circuits.
ˎ Connect the yellow and red power supply leads
only after all other leads have been connected.
ˎ Be sure to insulate any loose unconnected leads
with electrical tape for safety.
ˎ Choose the installation location carefully so that
the unit will not interfere with normal driving
operations.
operations.
ˎ Avoid installing the unit in areas subject to dust,
dirt, excessive vibration, or high temperature,
such as in direct sunlight or near heater ducts.
such as in direct sunlight or near heater ducts.
ˎ Use only the supplied mounting hardware for a
safe and secure installation.
Note on the power supply lead (yellow)
When connecting this unit in combination with other
stereo components, the amperage rating of the car
circuit to which the unit is connected must be higher
than the sum of each component’s fuse amperage
rating.
When connecting this unit in combination with other
stereo components, the amperage rating of the car
circuit to which the unit is connected must be higher
than the sum of each component’s fuse amperage
rating.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Connection/Installation
Precautions
Connection
ʕ*
5
*
6
Rear view camera*
1
Portable audio/
video device*
video device*
1
*
7
For details, see “Making
connections” (page 34).
connections” (page 34).
from a wired remote control (not
supplied)
supplied)
*4
*
3
*
3
*
3
Subwoofer*
1
Power amplifier*
1
*
3
*
3
*
3
Monitor*
1
ʓ
*
2
See “Power connection diagram” (page 35)
for details.
for details.
from a car antenna (aerial)
.
*1 Not supplied
*2 Speaker impedance: 4 – 8 Ω × 4
*3 RCA pin cord (not supplied)
*4 Depending on the type of car, use an adaptor for a
*2 Speaker impedance: 4 – 8 Ω × 4
*3 RCA pin cord (not supplied)
*4 Depending on the type of car, use an adaptor for a
wired remote control (not supplied).
For details on using the wired remote control, see
“Using the wired remote control” (page 36).
For details on using the wired remote control, see
“Using the wired remote control” (page 36).
*5 Whether in use or not, route the microphone input
cord so it does not interfere with driving operations.
Secure the cord with a clamp, etc., if it is installed
around your feet.
Secure the cord with a clamp, etc., if it is installed
around your feet.
*6 For details on installing the microphone, see
“Installing the microphone” (page 35).
*7 Such as a portable media player, game console, etc.
If you have a power antenna (aerial) without a relay
box, connecting this unit with the supplied power
supply connection cable ʓ may damage the
antenna (aerial).
ɞ To the car’s speaker connector
box, connecting this unit with the supplied power
supply connection cable ʓ may damage the
antenna (aerial).
ɞ To the car’s speaker connector
ɟ To the car’s power connector
Making connections
1
Rear speaker
(right)
(right)
È Purple
2
¾ Purple/black
striped
3
Front speaker
(right)
(right)
È Gray
4
¾ Gray/black striped
5
Front speaker
(left)
(left)
È White
6
¾ White/black
striped
7
Rear speaker
(left)
(left)
È Green
8
¾ Green/black
striped
12
continuous power
supply
supply
Yellow
13
power antenna (aerial) /
power amplifier control
(REM OUT)
power amplifier control
(REM OUT)
Blue/white striped
14
switched illumination
power supply
power supply
Orange/white
striped
striped
15
switched power supply
Red
16
ground (earth)
Black
ɡ To the +12 V power terminal of the car’s rear
lamp lead (only when connecting the rear
view camera)
view camera)
Memory hold connection
When the yellow power supply lead is connected,
power will always be supplied to the memory
circuit even when the ignition switch is turned off.
power will always be supplied to the memory
circuit even when the ignition switch is turned off.
Speaker connection
ˎ Before connecting the speakers, turn the unit off.
ˎ Use speakers with an impedance of 4 to 8 ohms
and with adequate power handling capacities to
avoid damage.
avoid damage.
Monitor connection
When installing a monitor for the rear seat, connect
its parking brake switch cord to the ground (earth).
its parking brake switch cord to the ground (earth).
.
.
ɠ To the parking brake switch cord
The mounting position of the parking brake
switch cord depends on your car.
Be sure to connect the parking brake lead (light
green) of the power supply connection cable ʓ
to the parking brake switch cord.
switch cord depends on your car.
Be sure to connect the parking brake lead (light
green) of the power supply connection cable ʓ
to the parking brake switch cord.
Parking brake switch cord
Hand brake type
Foot brake type
XAV-W600/W650BT
15
To capture your voice during handsfree calling, you
need to install the microphone ʕ.
need to install the microphone ʕ.
Cautions
ˎ It is extremely dangerous if the cord becomes
wound around the steering column or gearstick.
Be sure to keep it and other parts from interfering
with your driving operations.
Be sure to keep it and other parts from interfering
with your driving operations.
ˎ If airbags or any other shock-absorbing
equipment are in your car, contact the store
where you purchased this unit, or the car dealer,
before installation.
where you purchased this unit, or the car dealer,
before installation.
Installing the microphone
ʖ
ʕ
Clip (not supplied)
ʕ
Make sure your car’s auxiliary power connector and
match the connections of cords correctly
depending on the car.
match the connections of cords correctly
depending on the car.
Common connection
When the positions of the red and yellow
leads are inverted
leads are inverted
For cars without ACC position
After matching the connections and switching
power supply leads correctly, connect the unit to
the car’s power supply. If you have any questions
and problems connecting your unit that are not
covered in this manual, consult the car dealer.
power supply leads correctly, connect the unit to
the car’s power supply. If you have any questions
and problems connecting your unit that are not
covered in this manual, consult the car dealer.
Power connection diagram
12
continuous power
supply
supply
Yellow
15
switched power supply
Red
12
switched power supply Yellow
15
continuous power
supply
supply
Red
Auxiliary power connector
Red
Red
Yellow
Yellow
Red
Red
Yellow
Yellow
Red
Red
Yellow
Yellow
Installation
Before installing the unit, remove the bracket ʗ
from the unit.
from the unit.
1
Insert the release keys ʘ into the
catches between the unit and the
bracket ʗ at the same time until they
click.
catches between the unit and the
bracket ʗ at the same time until they
click.
2
Pull down the bracket ʗ, then pull up
the unit to separate them.
the unit to separate them.
Removing the bracket
ʘ
ʗ
Catch
Face the hook inwards.
When using the steering wheel remote
control
control
Installation of the connection cable RC-SR1 (not
supplied) is required before use.
supplied) is required before use.
1
To enable the steering wheel remote control, select
[General Settings] q [User Defined] to make the
registration (page 19).
When the registration is complete, the steering
wheel remote control becomes available.
[General Settings] q [User Defined] to make the
registration (page 19).
When the registration is complete, the steering
wheel remote control becomes available.
Notes on installing the connection cable RC-SR1 (not
supplied)
supplied)
ˎ Refer to the support sites on the back cover for
details, then connect each lead properly to the
appropriate leads. Making an improper connection
may damage the unit.
appropriate leads. Making an improper connection
may damage the unit.
ˎ Consulting the dealer or an experienced technician
for help is recommended.
When using the wired remote control
1
To enable the wired remote control, set [Steering
Control] in [General Settings] to [Preset] (page 19).
Control] in [General Settings] to [Preset] (page 19).
Installation of the rearview camera (not supplied) is
required before use.
The image of a rearview camera connected to the
CAMERA IN terminal is displayed when:
required before use.
The image of a rearview camera connected to the
CAMERA IN terminal is displayed when:
ˋ the back lamp of your car lights up (or the shift
lever is set to the R (reverse) position).
ˋ you press HOME, then touch [Rear Camera].
ˋ you press and hold DSPL then touch [Rear
Camera] if [SOURCE Key Func.] is set to [DSPL]
Using the wired remote control
Using the rearview camera
Mounting the unit in a Japanese car
You may not be able to install this unit in some
Japanese cars. In such a case, consult your Sony
dealer.
Japanese cars. In such a case, consult your Sony
dealer.
When mounting this unit to the preinstalled
brackets of your car, use the supplied screws ʔ in
the appropriate screw holes based on your car: T
for TOYOTA, M for MITSUBISHI and N for NISSAN.
brackets of your car, use the supplied screws ʔ in
the appropriate screw holes based on your car: T
for TOYOTA, M for MITSUBISHI and N for NISSAN.
Note
To prevent a malfunction, install only with the supplied
screws ʔ.
To prevent a malfunction, install only with the supplied
screws ʔ.
ʔ
To the dashboard/center console
Parts supplied with your
car
car
ʔ
Bracket
Bracket
1
Position the bracket ʗ inside the
dashboard, then bend the claws outward
for a tight fit.
dashboard, then bend the claws outward
for a tight fit.
2
Mount the unit onto the bracket ʗ.
Note
If the catches are straight or bent outwards, the unit will
not be installed securely and may spring out.
If the catches are straight or bent outwards, the unit will
not be installed securely and may spring out.
Catch
ʗ
Larger than
182 mm (7
182 mm (7
1
/
4
in)
Larger than
111 mm (4
111 mm (4
3
/
8
in)
ʙ
ʗ
When replacing the fuse, be sure to
use one matching the amperage
rating stated on the original fuse. If
the fuse blows, check the power
connection and replace the fuse. If
the fuse blows again after
replacement, there may be an
internal malfunction. In such a case, consult your
nearest Sony dealer.
use one matching the amperage
rating stated on the original fuse. If
the fuse blows, check the power
connection and replace the fuse. If
the fuse blows again after
replacement, there may be an
internal malfunction. In such a case, consult your
nearest Sony dealer.
Fuse replacement
Fuse (10 A)
Note
Before attaching the double-sided tape ʖ, clean the
surface of the dashboard with a dry cloth.
Before attaching the double-sided tape ʖ, clean the
surface of the dashboard with a dry cloth.
When mounting in a Japanese car, see “Mounting
the unit in a Japanese car” (page 37).
the unit in a Japanese car” (page 37).
Mounting the unit with the supplied
bracket
bracket
Before installing, make sure the catches on both
sides of the bracket ʗ are bent inwards 3.5 mm
(
sides of the bracket ʗ are bent inwards 3.5 mm
(
5
/
32
in).
Mounting the unit in the dashboard
.
.
.
.
XAV-W600/W650BT
16
(RU)
Внимание!
ˎ Подведите все заземляющие провода к
общей точке заземления.
ˎ Не допускайте попадания проводов под винты
или между подвижными деталями (например,
между направляющими сидений).
между направляющими сидений).
ˎ Во избежание короткого замыкания перед
установкой соединений выключите зажигание
автомобиля.
автомобиля.
ˎ Подключайте желтый и красный проводники
питания только тогда, когда подключены все
остальные проводники.
остальные проводники.
ˎ В целях безопасности обязательно изолируйте
все свободные неподсоединенные провода
электроизоляционной лентой.
электроизоляционной лентой.
ˎ Тщательно выбирайте место для установки
аппарата, чтобы он не мешал управлению
автомобилем.
автомобилем.
ˎ Не устанавливайте аппарат там, где он будет
подвержен воздействию пыли, грязи,
чрезмерной вибрации или высоких
температур, например в местах, куда
попадают прямые солнечные лучи, или вблизи
вентиляционных решеток обогревателей.
чрезмерной вибрации или высоких
температур, например в местах, куда
попадают прямые солнечные лучи, или вблизи
вентиляционных решеток обогревателей.
ˎ В целях обеспечения надежной и безопасной
установки используйте лишь входящие в
комплект монтажные детали.
комплект монтажные детали.
Примечание относительно провода питания
(желтый)
При подключении данного устройства вместе с
другими стереокомпонентами номинальное
значение силы тока в контуре питания автомобиля
должно превышать суммарное значение силы тока,
указанное на предохранителях всех компонентов.
(желтый)
При подключении данного устройства вместе с
другими стереокомпонентами номинальное
значение силы тока в контуре питания автомобиля
должно превышать суммарное значение силы тока,
указанное на предохранителях всех компонентов.
Регулировка угла установки
Отрегулируйте угол установки так, чтобы он
составлял менее 45°.
составлял менее 45°.
Установка/подключение
Меры предосторожности
Подключение
Камера заднего вида*
1
Портативное
аудио- или
видеоустройство*
аудио- или
видеоустройство*
1
*
5
Дополнительные
сведения см. в разделе
“Установка соединений”
(стр. 28).
сведения см. в разделе
“Установка соединений”
(стр. 28).
от проводного пульта
дистанционного управления (не
входит в комплект поставки)
дистанционного управления (не
входит в комплект поставки)
*4
*
3
*
3
*
3
Сабвуфер*
1
Усилитель мощности*
1
*
3
*
3
*
3
Монитор*
1
ʓ
*
2
Дополнительные сведения см. в разделе
“Схема подключения питания” (стр. 29).
“Схема подключения питания” (стр. 29).
от автомобильной антенны
.
.
*1 Не входит в комплект поставки.
*2 Полное сопротивление громкоговорителей:
*2 Полное сопротивление громкоговорителей:
4–8 Ω × 4
*3 Кабель с разъемами RCA (не входит в комплект
поставки).
*4 В зависимости от типа автомобиля, возможно,
потребуется использовать адаптер для
проводного пульта дистанционного управления
(не входит в комплект поставки).
Сведения об использовании проводного пульта
дистанционного управления см. в разделе
“Использование проводного пульта
дистанционного управления” (стр. 30).
проводного пульта дистанционного управления
(не входит в комплект поставки).
Сведения об использовании проводного пульта
дистанционного управления см. в разделе
“Использование проводного пульта
дистанционного управления” (стр. 30).
*5 Например, портативный медиаплеер, игровая
консоль и т. д.
Если вы используете антенну с
электроприводом без релейного блока,
подсоединение этого устройства с помощью
прилагаемого кабеля питания ʓ может
привести к повреждению антенны.
ɞ К разъему громкоговорителя автомобиля
электроприводом без релейного блока,
подсоединение этого устройства с помощью
прилагаемого кабеля питания ʓ может
привести к повреждению антенны.
ɞ К разъему громкоговорителя автомобиля
Установка соединений
1
Задний
громкоговоритель
(правый)
громкоговоритель
(правый)
È Фиолетовый
2
¾
Фиолетовый/с
черными
полосками
черными
полосками
3
Передний
громкоговоритель
(правый)
громкоговоритель
(правый)
È Серый
4
¾
Серый/с
черными
полосками
черными
полосками
5
Передний
громкоговоритель
(левый)
громкоговоритель
(левый)
È Белый
6
¾
Белый/с
черными
полосками
черными
полосками
7
Задний
громкоговоритель
(левый)
громкоговоритель
(левый)
È Зеленый
8
¾
Зеленый/с
черными
полосками
черными
полосками
ɟ К разъему электропитания автомобиля
12
Источник
бесперебойного
электропитания
бесперебойного
электропитания
Желтый
13
Антенна с
электроприводом/
управление
усилителем мощности
(REM OUT)
электроприводом/
управление
усилителем мощности
(REM OUT)
Синий/с белыми
полосками
полосками
14
Импульсный источник
электропитания
подсветки
электропитания
подсветки
Оранжевый/с
белыми
полосками
белыми
полосками
15
Импульсный источник
электропитания
электропитания
Красный
16
Заземление
Черный
.
Click on the first or last page to see other XAV-W600 / XAV-W650BT service manuals if exist.