DOWNLOAD Sony CDX-G3000UE / CDX-G3000UP / CDX-G3000UV / CDX-G3050UP / CDX-G3050UV / CDX-G3070UV Service Manual ↓ Size: 4.43 MB | Pages: 39 in PDF or view online for FREE

Model
CDX-G3000UE CDX-G3000UP CDX-G3000UV CDX-G3050UP CDX-G3050UV CDX-G3070UV
Pages
39
Size
4.43 MB
Type
PDF
Document
Service Manual
Brand
Device
Car Audio
File
cdx-g3000ue-cdx-g3000up-cdx-g3000uv-cdx-g3050up-cd.pdf
Date

Sony CDX-G3000UE / CDX-G3000UP / CDX-G3000UV / CDX-G3050UP / CDX-G3050UV / CDX-G3070UV Service Manual ▷ View online

CDX-G3000UE/G3000UP/G3000UV/G3050UP/G3050UV/G3070UV
29
MAIN  BOARD  IC701  LC78615E-01US-H (RF  AMP,  DIGITAL  SERVO  PROCESSOR)
Pin No.
Pin Name
I/O
Description
1
EFMIN
I
RF signal input terminal
2
RFOUT
O
RF signal output terminal
3
LPF
-
External low-pass fi lter capacitor connection terminal for DC level detection of RF signal
4
PHLPF
-
External low-pass fi lter capacitor connection terminal for scratch detection
5
AIN
I
Main beam (B) input from the CD mechanism deck block
6
CIN
I
Main beam (C) input from the CD mechanism deck block
7
BIN
I
Main beam (A) input from the CD mechanism deck block
8
DIN
I
Main beam (C) input from the CD mechanism deck block
9
SLCISET
-
External resistor connection terminal for current setting of SLCO output
10
RFMON
-
Internal analog signal monitor terminal of LSI    Not used
11
VREF
O
Reference voltage (+1.65V) output terminal for RF
12
JITTC
-
External capacitor connection terminal for jitter detection
13
EIN
I
Sub beam (F) input from the CD mechanism deck block
14
FIN
I
Sub beam (E) input from the CD mechanism deck block
15
TE
O
Tracking error signal output terminal
16
TEIN
I
Tracking error signal input terminal
17
AVSS
-
Ground terminal (analog system)
18
AVDD
-
Power supply terminal (+3.3V) (analog system)
19
LDD
O
Laser power control signal output to the CD mechanism deck block
20
LDS
I
Laser power detection signal input from the CD mechanism deck block
21
FDO
O
Focus coil control signal output to the CD mechanism deck block
22
TDO
O
Tracking coil control signal output to the CD mechanism deck block
23
SLDO
O
Sled motor control signal output to the CD mechanism deck block
24
SPDO
O
Spindle motor control signal output to the CD mechanism deck block
25
VVSS1
-
Ground terminal (for EFMPLL)
26, 27
PDOUT1, PDOUT0
O
Charge pump output terminal for EFMPLL
28
PCKIST
-
External resistor connection terminal for charge pump current setting for EFMPLL
29
VVDD1
-
Power supply terminal (+3.3V) (for EFMPLL)
30, 31
NC
-
Not used
32
DVDD15
-
External power capacitor connection terminal for digital system power
33
DVDD
-
Power supply terminal (+3.3V) (digital system)
34
DVSS
-
Ground terminal (digital system)
35
TEST
I
Test mode setting terminal    Fixed at “L”
36
L_SW
I
Limit in detection switch input terminal
37, 38
NC
-
Not used
39
OPCDM
O
External decode permission signal output to the audio DSP
40
SBSY
O
CD sub-code block sync signal output to the audio DSP
41
SFSY
O
CD sub-code fl ame sync signal output to the audio DSP
42
PW
O
CD sub-code PW data output to the audio DSP
43
SBCK
O
Clock signal for CD sub-code data signal output to the audio DSP
44
CE
I
Chip enable signal input from the audio DSP
45
CL
I
Serial data transfer clock signal input from the audio DSP
46
DI
I
Serial data input from the audio DSP
47
DO
O
Serial data output to the audio DSP
48
RESB
I
Reset signal input from the audio DSP    “L”: reset
49
BUSYB
O
Busy signal output to the audio DSP    “L”: busy
50
MCLK
O
Master clock signal output to the audio DSP
51
LRCK
O
L/R sampling clock signal output to the audio DSP
52
BCK
O
Bit clock signal output to the audio DSP
53
DATA
O
Audio data output to the audio DSP
54 to 56
SMOIN0 to SMOIN2
O
Servo internal signal monitor output terminal    Not used
57
MODE
I
LSI operation mode setting terminal    Fixed at “H”
58
DVDD15
-
External power capacitor connection terminal for digital system power
59
DVDD
-
Power supply terminal (+3.3V) (digital system)
60
XVSS
-
Ground terminal (for oscillation circuit)
61
XOUT
O
System clock output terminal (16.934 MHz)
62
XIN
I
System clock input terminal (16.934 MHz)
63
XVDD
-
Power supply terminal (+3.3V) (for oscillation circuit)
64
SLCO
O
Slice level control signal output terminal
30
CDX-G3000UE/G3000UP/G3000UV/G3050UP/G3050UV/G3070UV
SECTION  5
EXPLODED  VIEWS
  1 
X-2587-755-1  KNOB (VOL) (SV) ASSY
  2 
X-2187-544-5  CASE ASSY (E, EA, IND, AUS)
 3 
X-2587-108-1 PANEL 
ASSY, 
SUB
  FFC1 
1-846-819-31  CABLE FLEXIBLE FLAT (27 CORE)
  FP1 
A-1958-235-A  PANEL OVERALL ASSY, FRONT (G3000UP)
  FP1 
A-1958-236-A  PANEL OVERALL ASSY, FRONT (G3000UV)
  FP1 
A-1958-237-A  PANEL OVERALL ASSY, FRONT (G3000UE)
  FP1 
A-1958-238-A  PANEL OVERALL ASSY, FRONT (G3050UV: E)
  FP1 
A-1958-239-A  PANEL OVERALL ASSY, FRONT (G3050UP)
  FP1 
A-1958-240-A  PANEL OVERALL ASSY, FRONT (G3050UV: MX)
  FP1 
A-1958-241-A  PANEL OVERALL ASSY, FRONT (G3070UV)
  FP1 
A-1958-242-A  PANEL OVERALL ASSY, FRONT (G3050UV: EA)
  FU1 
1-523-227-11  MINI FUSE (BLADE TYPE) (10 A/32 V)
  PW1 
1-846-032-11  CONNECTION CABLE (ISO) (POWER) 
(G3000UE/G3000UV)
  PW1 
1-846-978-11  CONNECTION CABLE, AUTOMOBILE (POWER) 
(G3000UP/G3050UP/G3050UV/G3070UV)
  #1 
7-685-792-09  SCREW +PTT 2.6X6 (S)
  #2 
7-685-790-01  SCREW +PTT 2.6X4 (S)
  Ref. No. 
Part No. 
Description 
Remark
  Ref. No. 
Part No. 
Description 
Remark
Note:
•  -XX and -X mean standardized parts, so 
they may have some difference from the 
original one.
•  Items marked “*” are not stocked since 
they are seldom required for routine ser-
vice. Some delay should be anticipated 
when ordering these items.
•  The mechanical parts with no reference 
number in the exploded views are not sup-
plied.
•  Color Indication of Appearance Parts Ex-
ample:
  KNOB, BALANCE (WHITE) . . . (RED)
   
 
 
   
 
Parts Color  Cabinet’s Color
5-1.  SUB  PANEL  SECTION
• Abbreviation
 AUS : 
Australian 
model
  CND  : Canadian model
  EA 
: Saudi Arabia model
  IND 
: Indian model
  MX 
: Mexican model
  RU 
: Russian model
1
3
not supplied
chassis section
#2
#2
#1
#1
#1
FFC1
#1
CD mechanism deck section
(MG-101CF-188)
C
PW1
FU1
B
A
B
A
C
not supplied
(for FRONT PANEL)
2
(E, EA, IND, AUS)
(US, CND, AEP, RU, 
UK, MX)
FP1
not supplied
Note: The service manual of the mechanism deck, used in this model, 
has been issued in a separate volume.  Please refer to the service 
manual of the MG-101 series for the mechanism deck informa-
tion.
Ver. 1.2
31
CDX-G3000UE/G3000UP/G3000UV/G3050UP/G3050UV/G3070UV
5-2.  CHASSIS  SECTION
  51 
A-1958-224-A  MAIN BOARD, COMPLETE (G3000UP) 
(Former type) (See Note 1, 2)
  51 
A-1958-224-B  MAIN BOARD, COMPLETE (G3000UP) (New type) 
(See Note 1, 2)
  51 
A-1958-225-A  MAIN BOARD, COMPLETE (G3000UE/G3000UV/
G3050UP/G3050UV/G3070UV) (Former type) 
(See Note 1, 2)
  51 
A-1958-225-B  MAIN BOARD, COMPLETE (G3000UE/G3000UV/
G3050UP/G3050UV/G3070UV) (New type) 
(See Note 1, 2)
  52 
4-410-504-01  SCREW (+PTT 2.6X6), GROUND POINT
  TU01 
A-1946-531-A  TUX-DSP03 (TUNER UNIT)
  WR1 
1-846-977-11  WIRE, PVC UL1569 AWG18 YEL L66 (Former type) 
(See Note 2)
  #3 
7-685-793-01  SCREW +PTT 2.6X8 (S)
  #4 
7-685-794-01  SCREW +PTT 2.6X10 (S)
  #5 
7-685-134-19  SCREW +P 2.6X8 TYPE2 NON-SLIT
  Ref. No. 
Part No. 
Description 
Remark
  Ref. No. 
Part No. 
Description 
Remark
MAIN 
board
TU01
not supplied
not supplied
not supplied
not supplied
#4
#4
#4
#4
#5
#5
#3
#3
(EA)
52
not supplied
WR1
(Former type)
52
51
Ver. 1.2
Note 2: Refer to the “NEW/FORMER DISCRIMINATION” on page 
1 on the supplement-1 for how to distinguish Former type and 
New type of MAIN board.
Note 1: When the complete MAIN board is replaced, the destination 
setting is necessary. Refer to “NOTE OF REPLACING THE 
COMPLETE MAIN BOARD OR SYSTEM CONTROLLER 
(IC501)” on page 4.
32
CDX-G3000UE/G3000UP/G3000UV/G3050UP/G3050UV/G3070UV
SECTION  6
ELECTRICAL  PARTS  LIST
  
 
KEY 
BOARD
  
 
**********
When the KEY board is defective, replace the FRONT PANEL OVERALL ASSY 
(Ref. No. FP1).
*************************************************************
   
A-1958-224-A  MAIN BOARD, COMPLETE (G3000UP) (See Note)
   
A-1958-225-A  MAIN BOARD, COMPLETE (G3000UE/G3000UV/
G3050UP/G3050UV/G3070UV) (See Note)
  
 
********************
   
7-685-134-19  SCREW +P 2.6X8 TYPE2 NON-SLIT
   
7-685-794-01  SCREW +PTT 2.6X10 (S)
   
 
< CAPACITOR >
 C13 
1-118-361-11  CERAMIC 
CHIP 0.1uF 
10%  50V
 C15 
1-137-765-21 ELECT 
CHIP  47uF 
20%  16V
 C100  1-118-290-11  CERAMIC 
CHIP 0.001uF  10%  50V
 C101  1-118-290-11  CERAMIC 
CHIP 0.001uF  10%  50V
 C102  1-118-361-11  CERAMIC 
CHIP 0.1uF 
10%  50V
 C105  1-114-813-11  CERAMIC 
CHIP 1uF 
10%  16V
 C115  1-100-591-91 CERAMIC 
CHIP 1uF 
10%  25V
 C200  1-116-865-11  CERAMIC 
CHIP 10uF 
10%  25V
 C201  1-116-865-11  CERAMIC 
CHIP 10uF 
10%  25V
 C202  1-116-865-11  CERAMIC 
CHIP 10uF 
10%  25V
 C204  1-114-326-11  CERAMIC 
CHIP 0.22uF  10%  25V
 C205  1-114-612-21 ELECT 
CHIP  220uF  20%  6.3V
 C206  1-114-326-11  CERAMIC 
CHIP 0.22uF  10%  25V
 C207  1-100-591-91 CERAMIC 
CHIP 1uF 
10%  25V
 C208  1-100-966-91 CERAMIC 
CHIP 10uF 
20%  10V
 C209  1-100-966-91 CERAMIC 
CHIP 10uF 
20%  10V
 C210  1-100-767-21 ELECT 
CHIP  220uF  20%  16V
 C211  1-117-681-11  ELECT 
CHIP  100uF  20%  16V
 C212  1-118-403-11  CERAMIC 
CHIP 0.001uF  10%  50V
 C213  1-118-403-11  CERAMIC 
CHIP 0.001uF  10%  50V
 C251  1-100-767-21 ELECT 
CHIP  220uF  20%  16V
 C252  1-127-931-21 ELECT 
CHIP  470uF  20%  16V
 C253  1-127-931-21 ELECT 
CHIP  470uF  20%  16V
 C260  1-117-681-11  ELECT 
CHIP  100uF  20%  16V
 C300  1-118-361-11  CERAMIC 
CHIP 0.1uF 
10%  50V
 C301  1-116-078-11  CERAMIC 
CHIP 1uF 
10%  50V
 C302  1-164-866-11 CERAMIC 
CHIP 47PF 
5%  50V
 C303  1-164-866-11 CERAMIC 
CHIP 47PF 
5%  50V
 C304  1-164-866-11 CERAMIC 
CHIP 47PF 
5%  50V
 C305  1-114-326-11  CERAMIC 
CHIP 0.22uF  10%  25V
 C306  1-164-866-11 CERAMIC 
CHIP 47PF 
5%  50V
 C307  1-100-966-91 CERAMIC 
CHIP 10uF 
20%  10V
 C308  1-114-813-11  CERAMIC 
CHIP 1uF 
10%  16V
 C309  1-114-813-11  CERAMIC 
CHIP 1uF 
10%  16V
 C310  1-114-813-11  CERAMIC 
CHIP 1uF 
10%  16V
 C311  1-114-813-11  CERAMIC 
CHIP 1uF 
10%  16V
 C312  1-114-813-11  CERAMIC 
CHIP 1uF 
10%  16V
 C313  1-114-813-11  CERAMIC 
CHIP 1uF 
10%  16V
 C314  1-114-813-11  CERAMIC 
CHIP 1uF 
10%  16V
 C315  1-114-813-11  CERAMIC 
CHIP 1uF 
10%  16V
 C316  1-114-813-11  CERAMIC 
CHIP 1uF 
10%  16V
 C317  1-114-813-11  CERAMIC 
CHIP 1uF 
10%  16V
 C319  1-164-866-11 CERAMIC 
CHIP 47PF 
5%  50V
 C320  1-164-866-11 CERAMIC 
CHIP 47PF 
5%  50V
 C321  1-114-326-11  CERAMIC 
CHIP 0.22uF  10%  25V
 C322  1-164-866-11 CERAMIC 
CHIP 47PF 
5%  50V
 C323  1-164-866-11 CERAMIC 
CHIP 47PF 
5%  50V
 C324  1-114-813-11  CERAMIC 
CHIP 1uF 
10%  16V
 C325  1-118-361-11  CERAMIC 
CHIP 0.1uF 
10%  50V
 C326  1-114-813-11  CERAMIC 
CHIP 1uF 
10%  16V
 C350  1-126-936-11 ELECT 
3300uF  20%  16V
 C400  1-112-298-91 CERAMIC 
CHIP 1uF 
10%  16V
 C401  1-164-882-11 CERAMIC 
CHIP 220PF  5%  16V
 C402  1-116-722-11  CERAMIC 
CHIP 4.7uF 
10%  16V
 C404  1-162-923-11 CERAMIC 
CHIP 47PF 
5%  50V
 C405  1-118-386-11  CERAMIC 
CHIP 0.1uF 
10%  16V
 C406  1-162-923-11 CERAMIC 
CHIP 47PF 
5%  50V
 C407  1-116-722-11  CERAMIC 
CHIP 4.7uF 
10%  16V
 C409  1-164-882-11 CERAMIC 
CHIP 220PF  5%  16V
 C410  1-112-298-91 CERAMIC 
CHIP 1uF 
10%  16V
 C411  1-118-040-11  CERAMIC 
CHIP 2.2uF 
10%  16V
 C412  1-118-040-11  CERAMIC 
CHIP 2.2uF 
10%  16V
 C415  1-118-386-11  CERAMIC 
CHIP 0.1uF 
10%  16V
 C416  1-100-966-91 CERAMIC 
CHIP 10uF 
20%  10V
 C418  1-118-047-11  CERAMIC 
CHIP 10uF 
10%  16V
 C420  1-164-882-11 CERAMIC 
CHIP 220PF  5%  16V
 C421  1-112-298-91 CERAMIC 
CHIP 1uF 
10%  16V
 C422  1-118-047-11  CERAMIC 
CHIP 10uF 
10%  16V
 C423  1-100-966-91 CERAMIC 
CHIP 10uF 
20%  10V
 C450  1-128-992-21 ELECT 
CHIP  47uF 
20%  25V
 C501  1-118-403-11  CERAMIC 
CHIP 0.001uF  10%  50V
 C502  1-118-403-11  CERAMIC 
CHIP 0.001uF  10%  50V
 C503  1-118-403-11  CERAMIC 
CHIP 0.001uF  10%  50V
 C520  1-118-403-11  CERAMIC 
CHIP 0.001uF  10%  50V
 C521  1-100-567-81 CERAMIC 
CHIP 0.01uF  10%  25V
 C522  1-100-567-81 CERAMIC 
CHIP 0.01uF  10%  25V
  Ref. No. 
Part No. 
Description 
Remark
  Ref. No. 
Part No. 
Description 
Remark
When indicating parts by reference num-
ber, please include the board name.
Note:
•  Due to standardization, replacements in 
the parts list may be different from the 
parts specifi ed in the diagrams or the com-
ponents used on the set.
•  -XX and -X mean standardized parts, so 
they may have some difference from the 
original one.
•  Items marked “*” are not stocked since 
they are seldom required for routine ser-
vice. Some delay should be anticipated 
when ordering these items.
• RESISTORS
  All resistors are in ohms.
 METAL: 
Metal-fi lm resistor.
  METAL OXIDE: Metal oxide-fi lm resistor.
 F: 
nonfl ammable
• CAPACITORS
 uF: 
μF
• COILS
 uH: 
μH
• SEMICONDUCTORS
  In each case, u: μ, for example:
 uA. 
. : 
μA. . , uPA. . , μPA. . , 
 uPB. 
μPB. . , uPC. . , μPC. . , 
 uPD. 
μPD. .
• Abbreviation
 AUS : 
Australian 
model
  CND  : Canadian model
  EA 
: Saudi Arabia model
  IND 
: Indian model
  MX 
: Mexican model
  RU 
: Russian model
KEY
MAIN
Ver. 1.1
Note: When the complete MAIN board is replaced, the destination setting is necessary. Refer to “NOTE OF 
REPLACING THE COMPLETE MAIN BOARD OR SYSTEM CONTROLLER (IC501)” on page 4.
Page of 39
Display

Click on the first or last page to see other CDX-G3000UE / CDX-G3000UP / CDX-G3000UV / CDX-G3050UP / CDX-G3050UV / CDX-G3070UV service manuals if exist.