DOWNLOAD Sony CDX-G3000UE / CDX-G3000UP / CDX-G3000UV / CDX-G3050UP / CDX-G3050UV / CDX-G3070UV Service Manual ↓ Size: 4.43 MB | Pages: 39 in PDF or view online for FREE

Model
CDX-G3000UE CDX-G3000UP CDX-G3000UV CDX-G3050UP CDX-G3050UV CDX-G3070UV
Pages
39
Size
4.43 MB
Type
PDF
Document
Service Manual
Brand
Device
Car Audio
File
cdx-g3000ue-cdx-g3000up-cdx-g3000uv-cdx-g3050up-cd.pdf
Date

Sony CDX-G3000UE / CDX-G3000UP / CDX-G3000UV / CDX-G3050UP / CDX-G3050UV / CDX-G3070UV Service Manual ▷ View online

SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
(Russian model)
(E, Mexican, Indian  and Australian models)
(AEP and UK models)
(Saudi Arabia model)
Tuner section
FM
Tuning range: 87.5 – 108.0 MHz
Antenna (aerial) terminal: 
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (stereo)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
MW/LW
Tuning range:
MW: 531 – 1,602 kHz
LW: 153 – 279 kHz
Antenna (aerial) terminal: 
External antenna (aerial) connector
Intermediate frequency: 
Sensitivity: MW: 26 μV, LW: 45 μV  
9,124.5 kHz or 9,115.5 kHz/4.5 kHz
FM
FM1/FM2: 87.5 – 108.0 MHz 
(at 50 kHz step)
FM3: 65 – 74 MHz (at 30kHz step)
Antenna (aerial) terminal: 
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (stereo)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
MW/LW
Tuning range:
MW: 531 – 1,602 kHz
LW: 153 – 279 kHz
Antenna (aerial) terminal: 
External antenna (aerial) connector
Intermediate frequency: 
Sensitivity: MW: 26 μV, LW: 45 μV  
9,124.5 kHz or 9,115.5 kHz/4.5 kHz
FM
Tuning range:
87.5 – 108.0 MHz (at 50 kHz step)
87.5 – 108.0 MHz (at 100 kHz step)
87.5 – 107.9 MHz (at 200 kHz step)
FM tuning step:
50 kHz/100 kHz/200 kHz switchable
Antenna (aerial) terminal: 
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (stereo)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
AM
Tuning range:
531 – 1,602 kHz (at 9 kHz step)
530 – 1,710 kHz (at 10 kHz step)
AM tuning step: 
9 kHz/10 kHz switchable
Antenna (aerial) terminal: 
External antenna (aerial) connector
Intermediate frequency: 
9,124.5 kHz or 9,115.5 kHz/4.5 kHz (at 9 kHz 
step)
9,115 kHz or 9,125 kHz/5 kHz (at 10 kHz step)
Sensitivity: 26 μV
FM
Tuning range: 87.5 – 108.0 MHz
Antenna (aerial) terminal: 
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (stereo)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
FOR UNITED STATES CUSTOMERS. NOT 
(US and Canadian models only)
(US and Canadian models only)
APPLICABLE IN CANADA, INCLUDING IN 
THE PROVINCE OF QUEBEC.
POUR LES CONSOMMATEURS AUX ÉTATS-
UNIS. NON APPLICABLE AU CANADA, Y 
COMPRIS LA PROVINCE DE QUÉBEC.
AUDIO POWER SPECIFICATIONS
CEA2006 Standard
Power Output: 17 Watts RMS 4 at 
4 Ohms < 1% THD+N
SN Ratio: 80 dBA 
(reference: 1 Watt into 4 Ohms)
Tuner section
FM
Tuning range: 87.5 – 107.9 MHz
Antenna (aerial) terminal: 
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (stereo)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
AM
Tuning range: 530 – 1,710 kHz
Antenna (aerial) terminal: 
External antenna (aerial) connector
Intermediate frequency: 
9,115 kHz or 9,125 kHz/5 kHz
Sensitivity: 26 μV
(US and Canadian models)
CDX-G3000UE/G3000UP/G3000UV/
G3050UP/G3050UV/G3070UV
SPECIFICATIONS
9-893-806-04
2014D33-1
© 
2014.04
US Model
Canadian Model
CDX-G3000UP
AEP Model
UK Model
CDX-G3000UV
E Model
CDX-G3050UV
Australian Model
CDX-G3050UP
Russian Model
CDX-G3000UE
Indian Model
CDX-G3070UV
Ver. 1.3  2014.04
Model Name Using Similar Mechanism
NEW
Mechanism Type
MG-101CF-188
Optical Pick-up Name
DAX-25A
•  The tuner and CD sections have no adjustments.
US, Canadian, E, Mexican, Indian and Australian models
FM/AM COMPACT DISC PLAYER
AEP, Russian and UK models
FM/MW/LW COMPACT DISC PLAYER
Saudi Arabia model
FM/MW/SW COMPACT DISC PLAYER
The service manual of the mechanism deck, used in 
this model, has been issued in a separate volume. 
Please refer to the service manual of the MG-101 
series for the mechanism deck information.
– Continued on next page –
Photo: CDX-G3050UV
CDX-G3000UE/G3000UP/G3000UV/G3050UP/G3050UV/G3070UV
2
Quick-BrowZer is a trademark of Sony 
Corporation.
Windows Media is either a registered trademark 
or trademark of Microsoft Corporation in the 
United States and/or other countries.
This product is protected by certain intellectual 
property rights of Microsoft Corporation. Use or 
distribution of such technology outside of this 
product is prohibited without a license from 
Microsoft or an authorized Microsoft subsidiary.
iPhone, iPod, iPod classic, iPod nano, and iPod 
touch are trademarks of Apple Inc., registered in 
the U.S. and other countries.
MPEG Layer-3 audio coding technology and 
patents licensed from Fraunhofer IIS and 
Thomson.
Pandora, the Pandora logo, and the Pandora 
trade dress are trademarks or registered 
trademarks of Pandora Media, Inc., used with 
permission.
Android is a trademark of Google Inc. Use of this 
trademark is subject to Google Permissions.
Copyrights
NOTES  ON  CHIP  COMPONENT  REPLACEMENT
• 
Never reuse a disconnected chip component.
• 
Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
FLEXIBLE  CIRCUIT  BOARD  REPAIRING
• 
Keep the temperature of soldering iron around 270 °C during 
repairing.
• 
Do not touch the soldering iron on the same conductor of the 
circuit board (within 3 times).
• 
Be careful not to apply force on the conductor when soldering 
or unsoldering.
Remote commander (1) : RM-X211 (CDX-
G3000UP/G3050UP/G3050UV/G3070UV only)
Parts for installation and connections (1 set)
Design and specifications are subject to 
change without notice.
USB Player section
Interface: USB (Full-speed)
Maximum current: 1 A
The maximum number of recognizable data:
folders (albums): 128
files (tracks) per folder: 512
Corresponding codec: 
MP3 (.mp3), and WMA (.wma)
Power amplifier section
Output: Speaker outputs
Speaker impedance: 4 – 8 ohms
Maximum power output: 55 W × 4 (at 4 ohms)
General
Outputs:
Audio outputs terminal (rear, sub)
Power antenna (aerial)/Power amplifier 
control terminal (REM OUT)
Inputs:
Remote controller input terminal
Antenna (aerial) input terminal
AUX input jack (stereo mini jack)
USB port
Power requirements: 12 V DC car battery 
(negative ground (earth))
Dimensions: 
Approx. 178 mm × 50 mm × 177 mm 
(7 
1
/
8
 in × 2 in × 7 in) (w/h/d)
Mounting dimensions: 
Approx. 182 mm × 53 mm × 160 mm 
(7 
1
/
4
 in × 2 
1
/
8
 in × 6 
5
/
16
 in) (w/h/d)
Mass: Approx. 1.2 kg (2 lb 11 oz)
Package contents:
CD Player section
Signal-to-noise ratio: 95 dB
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
Corresponding codec: 
MP3 (.mp3), and WMA (.wma)
Sensitivity: 26 μV
MW
Tuning range: 531 – 1,602 kHz
Antenna (aerial) terminal: 
External antenna (aerial) connector
Intermediate frequency: 
9,124.5 kHz or 9,115.5 kHz/4.5 kHz
Sensitivity: 26 μV
SW
Tuning range:
SW1: 2,940 – 7,735 kHz
SW2: 9,500 – 18,135 kHz
(except for 10,140 – 11,575 kHz)
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency:
9,124.5 kHz or 9,115.5 kHz/4.5 kHz
CAUTION
Use of controls or adjustments or performance of procedures 
other than those specifi ed herein may result in hazardous radia-
tion exposure.
SAFETY-RELATED  COMPONENT  WARNING!
COMPONENTS  IDENTIFIED  BY  MARK  0  OR  DOTTED  LINE  
WITH  MARK  
0  ON  THE  SCHEMATIC  DIAGRAMS  AND  IN  
THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE  OPERATION.
REPLACE  THESE  COMPONENTS  WITH  SONY  PARTS 
 
WHOSE  PART  NUMBERS  APPEAR  AS  SHOWN  IN  THIS  
MANUAL  OR  IN  SUPPLEMENTS  PUBLISHED  BY  SONY.
ATTENTION  AU  COMPOSANT  AYANT  RAPPORT  
À  LA  SÉCURITÉ!
LES  COMPOSANTS  IDENTIFIÉS  PAR  UNE  MARQUE  0  SUR  
LES  DIAGRAMMES  SCHÉMATIQUES  ET  LA  LISTE  DES  
PIÈCES  SONT  CRITIQUES  POUR  LA  SÉCURITÉ  DE  FONC-
TIONNEMENT.  NE  REMPLACER  CES  COMPOSANTS  QUE  
PAR  DES  PIÈCES  SONY  DONT  LES  NUMÉROS  SONT  DON-
NÉS  DANS  CE  MANUEL  OU  DANS  LES  SUPPLÉMENTS  
PUBLIÉS  PAR  SONY.
US and Canadian models:
CAUTION
The use of optical instruments with this product 
will increase eye hazard.
Ver. 1.1
CDX-G3000UE/G3000UP/G3000UV/G3050UP/G3050UV/G3070UV
3
SECTION  1
SERVICING  NOTES
NOTES  ON  HANDLING  THE OPTICAL  PICK-UP  
BLOCK  OR  BASE  UNIT
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated by 
the charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also 
use the procedure in the printed matter which is included in the 
repair parts.
The fl exible board is easily damaged and should be handled with 
care.
NOTES  ON  LASER  DIODE  EMISSION  CHECK
Never look into the laser diode emission from right above when 
checking it for adjustment. It is feared that you will lose your sight.
If the optical pick-up block is defective, please replace the whole 
optical pick-up block.
Never turn the semi-fi xed resistor located at the side of optical 
pick-up block.
optical pick-up
semi-fixed resistor
UNLEADED  SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution:  Some printed circuit boards may not come printed with 
the lead free mark due to their particular size)
 : LEAD  FREE  MARK
Unleaded solder has the following characteristics.
•  Unleaded solder melts at a temperature about 40 °C higher 
than ordinary solder.
 
Ordinary soldering irons can be used but the iron tip has to be 
applied to the solder joint for a slightly longer time.
 
Soldering irons using a temperature regulator should be set to 
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if 
the heated tip is applied for too long, so be careful!
• Strong 
viscosity
 
Unleaded solder is more viscous (sticky, less prone to fl ow) 
than ordinary solder so use caution not to let solder bridges 
occur such as on IC pins, etc.
•  Usable with ordinary solder
 
It is best to use only unleaded solder but unleaded solder may 
also be added to ordinary solder.
1. 
SERVICING  NOTES 
 .............................................   3
2. GENERAL 
 ..................................................................   7
3. DISASSEMBLY
3-1. Disassembly 
Flow 
...........................................................  15
3-2.  Mini Fuse (Blade Type) (10A/32V) (FU1), Cover .........   15
3-3. Sub 
Panel 
Assy 
................................................................  16
3-4.  CD Mechanism Deck (MG-101CF-188) ........................   16
3-5. MAIN 
Board 
...................................................................  17
4. DIAGRAMS
4-1.  Printed Wiring Boards - MAIN Section (1/2) - ..............   20
4-2.  Printed Wiring Boards - MAIN Section (2/2) - ..............   21
4-3.  Schematic Diagram - MAIN Section (1/4) - ...................   22
4-4.  Schematic Diagram - MAIN Section (2/4) - ...................   23
4-5.  Schematic Diagram - MAIN Section (3/4) - ...................   24
4-6.  Schematic Diagram - MAIN Section (4/4) - ...................   25
5. 
EXPLODED  VIEWS
5-1.  Sub Panel Section ...........................................................   30
5-2. Chassis 
Section 
...............................................................  31
6. 
ELECTRICAL  PARTS  LIST 
 ..............................   32
Accessories are given in the last of the electrical parts list.
TABLE  OF  CONTENTS
CDX-G3000UE/G3000UP/G3000UV/G3050UP/G3050UV/G3070UV
4
NOTE  OF  REPLACING  THE  COMPLETE  MAIN  BOARD  
OR  SYSTEM  CONTROLLER (IC501)
When the complete MAIN board or system controller (IC501) is 
replaced, the destination setting is necessary.
1. Destination Setting
Set destination according to the procedure below.
1-1.  Setting the Destination Code
1.  In the state of source off (the clock is displayed), enter the test 
mode by pressing the buttons in order of the [SHUF 4] t [5] 
t [PAUSE 6] (press only the [PAUSE 6] button for two sec-
onds).
2.  In the state in which the system controller version is displayed 
on the liquid crystal display (refer to following fi gure), enter 
the destination setting mode by pressing the buttons in order 
of the [
> M
 SEEK+] t [SEEK–
 m
 
.
] t [PUSH EN-
TER/MENU].
 
(Displayed characters/values in the following fi gure are ex-
ample)
System controller version
SHUF
3.  Input the alphanumeric character of 12 digits of “F    XXXXXX” 
displayed on the liquid crystal display, and execute the destina-
tion setting.
Note: Refer to following “1-3. Entering the Destination Code” for opera-
tion method.
4.  The resetting operation is executed by pressing the [
 
OFF 
SRC] button for 1 second after the setting ends, and the unit 
returns to the normal condition.
1-2.  Display in Destination Setting Mode
(Displayed characters/values in the following fi gure are example)
Destination code
12 digit
OP5 OP4 OP3 OP2 OP1 OP0
SHUF
1-3.  Entering the Destination Code
•  Method of operation by main unit
1.  Rotate the control dial, and select the alphanumeric character 
of “0 to F”.
2.  The digit advances by pressing the [PUSH ENTER/MENU] or 
[
> M
 SEEK+] button.
 
The digit returns by pressing the [MODE  ] or [SEEK–
  m
 
.
] button.
3.  The setting is completed by pressing the [PUSH ENTER/
MENU] button, and the initialization operation is done.
•  Method of operation by remote commander
 (CDX-G3000UP/G3050UP/G3050UV/G3070UV 
only)
 
Note: The model to which the remote commander is not attached can 
also be operated by using the remote commander.
1. Press the [V] or [v] button, and select the alphanumeric char-
acter of “0 to F”.
2.  The digit advances by pressing the [b] button.
 
The digit returns by pressing the [B] button.
3.  The setting is completed by pressing the [ENTER] button, and 
the initialization operation is done.
Ver. 1.2
Page of 39
Display

Sony CDX-G3000UE / CDX-G3000UP / CDX-G3000UV / CDX-G3050UP / CDX-G3050UV / CDX-G3070UV Service Manual ▷ Download

  • DOWNLOAD Sony CDX-G3000UE / CDX-G3000UP / CDX-G3000UV / CDX-G3050UP / CDX-G3050UV / CDX-G3070UV Service Manual ↓ Size: 4.43 MB | Pages: 39 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony CDX-G3000UE / CDX-G3000UP / CDX-G3000UV / CDX-G3050UP / CDX-G3050UV / CDX-G3070UV in PDF for free, which will help you to disassemble, recover, fix and repair Sony CDX-G3000UE / CDX-G3000UP / CDX-G3000UV / CDX-G3050UP / CDX-G3050UV / CDX-G3070UV Car Audio. Information contained in Sony CDX-G3000UE / CDX-G3000UP / CDX-G3000UV / CDX-G3050UP / CDX-G3050UV / CDX-G3070UV Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.