Sony CDX-G1100U / CDX-G1100UE / CDX-G1101U / CDX-G1102U / CDX-G1150U / CDX-G1151U / CDX-G1152U / CDX-G1180UM Service Manual ▷ View online
CDX-G1100U/G1100UE/G1101U/G1102U/G1150U/G1151U/G1152U/G1180UM
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.08
New
1.1
2014.12
Deletion of CONNECTION CABLE FOR AUTOMOBILE (POWER CORD) (Type C connector)
(CDX-G1180UM)
Change of Part No. for SHEET HEAT TRANSFER and OPERATING INSTRUCTION
(Saudi Arabia model)
Change of Part No. for KEY (FRAME) (Ref. No. 502)
Change of MAIN board (Suffi x-12/-21) (SUPPLEMENT-1)
(SMR-14042)
1.2
2015.07
Addition of CDX-G1152U
Change of Part No. for complete MAIN board (Type 2)
(CDX-G1100U: AEP, UK/G1150U: Indian/G1180UM)
Change of Part for Ref. No. IC1301 on the MAIN board (Type 2)
(SMR-15011)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
CDX-G1100U/G1100UE/G1101U/G1102U/G1150U/G1151U/G1152U/G1180UM
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.08
New
1.1
2014.12
Deletion of CONNECTION CABLE FOR AUTOMOBILE (POWER CORD) (Type C connector)
(CDX-G1180UM)
Change of Part No. for SHEET HEAT TRANSFER and OPERATING INSTRUCTION
(Saudi Arabia model)
Change of Part No. for KEY (FRAME) (Ref. No. 502)
Change of MAIN board (Suffi x-12/-21) (SUPPLEMENT-1)
(SMR-14042)
1.2
2015.07
Addition of CDX-G1152U
Change of Part No. for complete MAIN board (Type 2)
(CDX-G1100U: AEP, UK/G1150U: Indian/G1180UM)
Change of Part for Ref. No. IC1301 on the MAIN board (Type 2)
(SMR-15011)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
CDX-G1100U/G1100UE/G1101U/G1102U/G1150U/G1151U/G1152U/G1180UM
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.08
New
1.1
2014.12
Deletion of CONNECTION CABLE FOR AUTOMOBILE (POWER CORD) (Type C connector)
(CDX-G1180UM)
Change of Part No. for SHEET HEAT TRANSFER and OPERATING INSTRUCTION
(Saudi Arabia model)
Change of Part No. for KEY (FRAME) (Ref. No. 502)
Change of MAIN board (Suffi x-12/-21) (SUPPLEMENT-1)
(SMR-14042)
1.2
2015.07
Addition of CDX-G1152U
Change of Part No. for complete MAIN board (Type 2)
(CDX-G1100U: AEP, UK/G1150U: Indian/G1180UM)
Change of Part for Ref. No. IC1301 on the MAIN board (Type 2)
(SMR-15011)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
CDX-G1100U/G1100UE/G1101U/G1102U/G1150U/G1151U/G1152U/G1180UM
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.08
New
1.1
2014.12
Deletion of CONNECTION CABLE FOR AUTOMOBILE (POWER CORD) (Type C connector)
(CDX-G1180UM)
Change of Part No. for SHEET HEAT TRANSFER and OPERATING INSTRUCTION
(Saudi Arabia model)
Change of Part No. for KEY (FRAME) (Ref. No. 502)
Change of MAIN board (Suffi x-12/-21) (SUPPLEMENT-1)
(SMR-14042)
1.2
2015.07
Addition of CDX-G1152U
Change of Part No. for complete MAIN board (Type 2)
(CDX-G1100U: AEP, UK/G1150U: Indian/G1180UM)
Change of Part for Ref. No. IC1301 on the MAIN board (Type 2)
(SMR-15011)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.