Sony CDX-G1100U / CDX-G1100UE / CDX-G1101U / CDX-G1102U / CDX-G1150U / CDX-G1151U / CDX-G1152U / CDX-G1180UM Service Manual ▷ View online
CDX-G1100U/G1100UE/G1101U/G1102U/G1150U/G1151U/G1152U/G1180UM
13
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
3-2. MINI FUSE (BLADE TYPE) (FU1),
COVER
(Page
COVER
(Page
13)
3-3. SUB
PANEL
ASSY
(Page
14)
3-4. CD MECHANISM DECK (MG-101CF-188)
(Page
(Page
14)
3-5. MAIN
BOARD
(Page
15)
SET
FRONT PANEL SECTION
Note: Illustration of disassembly is omitted.
Note: Illustration of disassembly is omitted.
3-6. SERVICE
POSITION
(Page
16)
Note: Follow the disassembly procedure in the numerical order given.
3-2. MINI FUSE (BLADE TYPE) (FU1), COVER
1 mini fuse (blade type)
(FU1)
(FU1)
2 two bosses
3 three claws
4 cover
2 two bosses
Boss is unlocked.
Boss is locked.
Note: When installing the cover, check
that four bosses are all locked.
OK
NG
CDX-G1100U/G1100UE/G1101U/G1102U/G1150U/G1151U/G1152U/G1180UM
14
3-3. SUB PANEL ASSY
3-4. CD MECHANISM DECK (MG-101CF-188)
2 two claws
2 two claws
rib
rib
1 two screws
(PTT2.6
(PTT2.6
u 6)
3 sub panel assy
Note: When installing the sub panel assy,
Note: When installing the sub panel assy,
align two ribs and two holes.
hole
hole
cable flexible flat
(27 core) (FFC1)
(27 core) (FFC1)
3 connector
(CN704)
2 Lift up the CD mechanism block
in the direction of the arrow.
6 bracket (CD)
1 screw
(PTT2.6
(PTT2.6
u 6)
Insert is straight to the interior.
connector
cable flexible flat
(27 core) (FFC1)
(27 core) (FFC1)
Connector is unlock.
connector
cable flexible flat
(27 core) (FFC1)
(27 core) (FFC1)
Insert is incline
connector
cable flexible flat
(27 core) (FFC1)
(27 core) (FFC1)
Insert is shallow
connector
slot
Note 3: When installing the cable flexible flat (27 core) (FFC1), insert straight to the connector and lock a connector completely.
No slanting after insertion.
Note 2: When installing the
CD mechanism block,
align the rib and
the
slot.
4 cable flexible flat (27 core)
(FFC1)
(FFC1)
(CN401)
1 screw
(PTT2.6
(PTT2.6
u 6)
5 two screws
(PTT2.6
(PTT2.6
u 4)
slot
7 CD mechanism deck
(MG-101CF-188)
(MG-101CF-188)
Note 2: When installing the CD mechanism block,
align the rib and the slot.
OK
NG
NG
NG
1 cable flexible flat
(27
(27
core) (FFC1)
(CN401)
2 cable flexible flat
(27
(27
core) (FFC1)
(CN704)
3
+RZWRLQVWDOO
WKH&'PHFKDQLVPGHFN
WKH&'PHFKDQLVPGHFN
Note 1: The service manual of the mechanism deck, used in this model has
been issued in a separate volume. Please refer to the service manual
of the MG-101 series for the mechanism deck information.
of the MG-101 series for the mechanism deck information.
CDX-G1100U/G1100UE/G1101U/G1102U/G1150U/G1151U/G1152U/G1180UM
15
3-5. MAIN BOARD
1 two ground point screws
(PTT2.6
(PTT2.6
u 6)
2 two screws
(PTT2.6
(PTT2.6
u 8)
6 MAIN board
3 claw
3 claw
3 claw
3 claw
4 Remove the MAIN board block
in the direction of the arrow.
5 sheet heat transfer
3DVWLQJSRVLWLRQRIWKHVKHHWKHDWWUDQVIHU
(EA)
(EA)
MAIN board
sheet heat transfer
guide line
guide line
rear side
Note: When the complete MAIN board is replaced, the destination setting is necessary. Refer to “NOTE OF
REPLACING THE COMPLETE MAIN BOARD OR SYSTEM CONTROLLER (IC501)” on page 4.
CDX-G1100U/G1100UE/G1101U/G1102U/G1150U/G1151U/G1152U/G1180UM
16
3-6. SERVICE POSITION
CD mechanism deck
CD mechanism deck
insulating sheet
insulating sheet
stand
stand
main unit
main unit
cable flexible flat (27 core)
(length: 150 mm)
Note 2: Do not cable flexible flat (27 core) is
(length: 150 mm)
Note 2: Do not cable flexible flat (27 core) is
damaged by the edge of the chassis.
cable flexible flat (27 core)
(length: 150 mm)
Note 2: Do not cable flexible flat (27 core) is
(length: 150 mm)
Note 2: Do not cable flexible flat (27 core) is
damaged by the edge of the chassis.
main unit
main unit
cable flexible flat (27 core)
(length: 150 mm)
(length: 150 mm)
cable flexible flat (27 core)
(length: 150 mm)
(length: 150 mm)
CD mechanism deck
Note 3: CD mechanical deck should
Note 3: CD mechanical deck should
not be placed vertically.
CD mechanism deck
Note 3: CD mechanical deck should
Note 3: CD mechanical deck should
not be placed vertically.
main unit
cable flexible flat (27 core)
(length: 150 mm)
(length: 150 mm)
CD mechanism deck
Note 4: CD mechanical deck should
Note 4: CD mechanical deck should
not be placed upside down.
OK
OK
NG
NG
NG
Note 1: The service position below cannot be performed with the fl exible
fl at cable (length: 80 mm) used with the unit. Refer to “NOTE OF
PERFORMING THE OPERATION CHECK” in the servicing
notes, and use a long fl exible fl at cable (length: 150 mm).
PERFORMING THE OPERATION CHECK” in the servicing
notes, and use a long fl exible fl at cable (length: 150 mm).
Click on the first or last page to see other CDX-G1100U / CDX-G1100UE / CDX-G1101U / CDX-G1102U / CDX-G1150U / CDX-G1151U / CDX-G1152U / CDX-G1180UM service manuals if exist.