DOWNLOAD Sony HCD-SLK10D / HCD-SLK20D / WHG-SLK10D / WHG-SLK20D Service Manual ↓ Size: 5.37 MB | Pages: 94 in PDF or view online for FREE

COLD  RESET
Reset the system to its factory default settings.
Procedure:
1.  Press the [

?/1

] button to turn on the system.

2.  Touch the [

M

], [

m

], [

<

] and [

,

] sensors to select the “Set-

tings”, and touch the [ENTER] sensor.

3.  Touch the [

M

], [

m

], [

<

] and [

,

] sensors to select the “Reset 

all settings”, and touch the [ENTER] sensor.

4.  Touch the [

<

] and [

,

] sensors to select the “Yes”, and touch 

the [ENTER] sensor.

5.  All the settings are reset and returned to the default settings, 

then become standby mode.

VERSION  DISPLAY
Each version, destination and model name are displayed.
Procedure:
1.  Press the [

?/1

] button to turn on the system.

2.  Press the [VOL –] button and touch two sensors of [

x

] and 

[RETURN] simultaneously.

3.  The system version, GUI version, DVD version, destination 

and model name are displayed on the liquid crystal display 
module.

Settings

System Information

System

GUI
DVD
Dest.
Model

:

:
:
:
:

1

2

3

4

5

Software version

1

 System version

2

 GUI version

3

 DVD version

4

 Destination:

 

04: 120V AC area in E, Chilean or Peruvian model

 

05: Singapore or Thai model

 

08: Chinese model

 

10: Saudi Arabia model

 

11: Indian model

 

12: Brazilian model

 

16: Mexican model

5

 Model name:

 00: 

HCD-SLK10D

 16: 

HCD-SLK20D

Releasing method:
Press the [

?/1

] button to turn off the system.

COMMON  TEST
The test of each category is executed.

Procedure:
1.  Press the [

?/1

] button to turn on the system.

2.  Press the [VOL –] button and touch two sensors of [

x

] and 

[ENTER] sensor simultaneously, then become common test 
mode.

3.  When the [VOL +] button is pressed, the sound volume in-

creases to its maximum and the message “Max.” appears on 
the liquid crystal display module.

4.  When the [VOL –] button is pressed, the sound volume de-

creases to its minimum and the message “Min.” appears on the 
liquid crystal display module.

Releasing method:
Press the [

?/1

] button to turn off the system.

DVD  SHIP  MODE  AND  COLD  RESET
Cold reset is executed at the same time with DVD ship 
mode. 
Procedure:
1.  Press the [

?/1

] button to turn on the system.

2.  Touch the [HOME] sensor.
3.  Touch the [

M

], [

m

], [

<

] and [

,

] sensors to select the “CD/

DVD”, and touch the [ENTER] sensor.

4. Confi rm there is no disc in the disc slot.
5.  Touch two sensors of [

x

] and [RETURN] and press the [

[/1

] 

button simultaneously.

6.  Become standby mode, then become DVD ship mode.

Releasing method:
Pull out the power code.

VIDEO/SAT  CHANGE
This mode changes external video source.
Procedure:
1.  Press the [

?/1

] button to turn on the system.

2.  Touch the [

M

], [

m

], [

<

] and [

,

] sensors to select the “Set-

tings”, and touch the [ENTER] sensor.

3.  Touch the [

M

], [

m

], [

<

] and [

,

] sensors to select the “Exter-

nal Video Source”, and touch the [ENTER] sensor.

4.  Touch the [

M

] and [

m

] sensors to select the “Video” or “Satel-

lite”, and touch the [ENTER] sensor.

5.  The external video source changed.

DISC  ANTITHEFT  LOCK
This mode is used to unable to take sample disc out of disc slot in 
the shop.
Procedure:
1.  Press the [

?/1

] button to turn on the system.

2.  Touch the [HOME] sensor.
3.  Touch the [

M

], [

m

], [

<

] and [

,

] sensors to select the “CD/

DVD”, and touch the [ENTER] sensor.

4.  Touch the [

x

] sensor and press the [

Z

] button simultaneously, 

and hold for more than fi ve seconds.

5.  The message “LOCKED” is displayed on the liquid crystal 

display module and the disc slot is locked (Even if pressing the 
[

Z

] button, the message “LOCKED” is displayed on the liquid 

crystal display module and the disc slot is locked).

Releasing method:
1.  Touch the [

x

] sensor and press the [

Z

] button simultaneously, 

and hold for more than fi ve seconds.

2.  The message “UNLOCKED” is displayed on the liquid crystal 

display module and the disc slot is unlocked.

DVD  COLOR  SYSTEM  CHANGE (Except 120V AC area 
in E, Mexican, Chilean, Peruvian and Brazilian models)
This mode let you change the color system of the video output 
from PAL to NTSC or vice-versa.
Procedure:
1.  Press the [

?/1

] button to turn on the system.

2.  Touch the [HOME] sensor.
3.  Touch the [

M

], [

m

], [

<

] and [

,

] sensors to select the “CD/

DVD”, and touch the [ENTER] sensor.

4.  Press the [

?/1

] button to turn off the system.

5.  Press two buttons of [VOL –] and [

?/1

] simultaneously.

6.  The message “DVD COLOR NTSC” or “DVD COLOR PAL” 

displayed on the liquid crystal display module and thus the 
color system is changed.

TUNER  STEP  CHANGE (Except Saudi Arabian model)
The step interval of AM channels can be toggled between 9 kHz 
and 10 kHz.
Procedure:
1.  Press the [

?/1

] button to turn on the system.

2.  Touch the [

M

], [

m

], [

<

] and [

,

] sensors to select the “Set-

tings”, and touch the [ENTER] sensor.

3.  Touch the [

M

], [

m

], [

<

] and [

,

] sensors to select the “AM 

Step Change”, and touch the [ENTER] sensor.

4.  Touch the [

M

] and [

m

] sensors to select the “9kHz” or “10kHz”, 

and touch the [ENTER] sensor.

5.  The step interval of AM channels changed.

REMOTE  DISABLE  MODE
This mode disable the remote commander reception.
Procedure:
1.  Press the [

?/1

] button to turn on the system.

2.  Press two buttons [

x

] and [VOL +] and touch the [

m

] sensor 

simultaneously.

3.  The remote commander reception is invalidated (there is no 

change in the display).

Releasing method:
Press two buttons [

x

] and [VOL +] and touch the [

m

] sensor si-

multaneously.

GENERAL  DESCRIPTION
The IOP measurement allows you to make diagnosis and adjust-
ment simply by using the remote commander . The instructions, 
diagnosis results, etc. are given on the on-screen display (OSD).
Be sure to execute the IOP measurement when a BU (Base Unit) 
is replaced.

DVD  SERVICE  MODE
It changes to the DVD service mode. Remote commander is neces-
sary for the operation. 

1.  HOW  TO  ENTER  THE  DVD  SERVICE  MODE
Procedure:
1.  Press the [

?/1

] button to turn on the system.

2.  Touch the [HOME] sensor.
3.  Touch the [

M

], [

m

], [

<

] and [

,

] sensors to select the “CD/

DVD”, and touch the [ENTER] sensor.

4  Press two buttons of [VOL +] and [Z] and touch the [x] sen-

sor simultaneously.

5.  The DVD service mode starts.
 

The menu shown below will be displayed on the liquid crystal 
display module.

 

Remocon Diagnosis Menu

0. External Chip Check
1. Servo Parameter Check
2. Drive Manual Operation
3. Emergency History
4. Version Information

Model Name
IF-con

: Ver. XX.XX (XXXX)

Syscon

: Ver. X.XXX

: XXXXXXXX

6.  The menu above is the Remocon Diagnosis Menu screen 

which consists of fi ve main functions. At the bottom of the 
menu screen, the model name, IF-con version and Syscon ver-
sion.

Releasing method:
Press the [

?/1

] button to turn off the system.

1-1.  EXECUTING  IOP  MEASUREMENT
In order to execute IOP measurement, the following standard pro-
cedures must be followed.
Procedure:
1.  Enter the DVD service mode.
2.  Select “2. Drive Manual Operation” by pressing the [2] button 

on the remote commander. The screen will appear as shown.

 

Drive Manual Operation

1. Servo Control
2. Track/Layer Jump
3. Manual Adjustment
4. Tray Aging Mode
5. MIRR time Adjust
0. Return to Top Menu

3.  Select “3. Manual Adjustment” by pressing the [3] button on 

the remote commander. The screen will appear as shown.

 

Manual Adjust

1. Track Balance Adjust:
2. Track Gain Adjust:
3. Focus Balance Adjust:
4. Focus Gain Adjust:
5. Eq Boost Adjust:
6. Iop:
7. TRV. Level:
8. S curve(FE) Level:
9. RFL(PI) Level:
0. MIRR Time:
[  M ] [ m ]   Change Value

[RETURN] Return to previous menu

4.  Select “6. IOP” by pressing the [6] button on the remote com-

mander.

5.  Wait until a hexadecimal number appear.

 

Manual Adjust

1. Track Balance Adjust:
2. Track Gain Adjust:
3. Focus Balance Adjust:
4. Focus Gain Adjust:
5. Eq Boost Adjust:
6. Iop. 51:
7. TRV. Level:
8. S curve(FE) Level:
9. RFL(PI) Level:
0. MIRR Time:
[  M ] [ m ]   Change Value

[RETURN] Return to previous menu

6.  Convert each data from hexadecimal to decimal using conver-

sion table.

7. Please 

fi nd the label on the rear of the BU (Base Unit).

 

The default IOP value is written in the label.

8.  Subtract between these two values.
9.  If the remainder is smaller than 93 (decimal), then it is OK. 

However if the value is higher than 93, then the BU is defec-
tive and need to be change.

10. Press the [RETURN] button on the remote commander to re-

turn back to previous menu.

11.  Press the [0] button on the remote commander to return to Top 

Menu.

1-2.  EMERGENCY  HISTORY
To check the emergency history, please follow the following pro-
cedure.
Procedure:
1.  From the Top Menu of Remocon Diagnosis Menu, select “3. 

Emergency History Check” by pressing the [3] button on the 
remote commander. The following screen appears on the on-
screen display.

 

Emg. History Check

01.  01  05  04  04

Laser Hours

CD

999h

59min

DVD

999h

59min

00  92  46  00

00  00  00  00

00  00  23  45

02.  02  02  01  01

00  A9  4B  00

00  00  00  00

00  00  23  45

 

[Next]   Next Page    [Prev]  Prev Page
[O]  Return to Top Menu

2.  You can check the total time when the laser is turned on during 

playback of DVD and CD from the above menu. The maxi-
mum time, which can be displayed are 999h 59min.

3.  You can check the error code of latest 10 emergency history 

from the above menu. To view the previous or next page of 
emergency history, press [

.

] or [

>

] button on the remote 

commander. The error code consists of the following three 
blocks. The fi rst block indicates the error code. The second 
block indicates the parameter and the third block indicates the 
time of error code as shown below.

 

Emg. History Check

01.  01  05  04  04

Laser Hours

CD

999h

59min

DVD

999h

59min

00  92  46  00

00  00  00  00

00  00  23  45

02.  02  02  01  01

00  A9  4B  00

00  00  00  00

00  00  23  45

 

[Next]   Next Page    [Prev]  Prev Page
[O]  Return to Top Menu

*

1

*

2

*

3

 

*1 : Error Code

 

*2 : Parameter of error code

 

*3 : Time of error code

 

01:   Communication error (No reply from syscon)

 

02:   Syscon hung up

 

03:   Power OFF request when syscon hung up

 

19:   Thermal shutdown

 

24:   MoveSledHome error

 

25:   Mechanical move error (5 Changer)

 

26:  Mechanical move stack error

 

30:   DC motor adjustment error

 

31:   DPD offset adjustment error

 

32:   TE balance adjustment error

 

33:   TE sensor adjustment error

 

34:   TE loop gain adjustment error

 

35:   FE loop gain adjustment error

 

36:   Bad jitter after adjustment

 

40:   Focus NG

 

42:   Focus layer jump NG

 

52:   Open kick spindle error

 

51:   Spindle stop error

 

60:   Focus on error

 

61:   Seek fail error

 

62:   Read Q data/ID error

 

70:   Lead in data read fail

 

71:  TOC read time out (CD)

 

80:   Can’t buffering

 

81:   Unknown media type

1-2-1.  Clear the Laser Hour
Press [

 DISPLAY] button and then press [CLEAR] button on the 

remote commander. The data for both CD and DVD data are reset.

 

Emg. History Check

01.  01  05  04  04

Laser Hours

CD

0h

0min

DVD

0h

0min

00  92  46  00

00  00  00  00

00  00  23  45

02.  02  02  01  01

00  A9  4B  00

00  00  00  00

00  00  23  45

 

[Next]   Next Page    [Prev]  Prev Page
[O]  Return to Top Menu