Sony HCD-SLK10D / HCD-SLK20D / WHG-SLK10D / WHG-SLK20D Service Manual ▷ View online
SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
HCD-SLK10D/SLK20D
SPECIFICATIONS
DVD RECEIVER
9-893-233-01
2011G33-1
©
2011.07
E Model
HCD-SLK20D
Chinese Model
Brazilian Model
Singapore Model
Thai Model
HCD-SLK10D
Ver. 1.0 2011.07
Model Name Using Similar Mechanism
NEW
Mechanism Type
CDM86S-DVBU101
Optical Pick-up Name
KHM-313CAB
• HCD-SLK10D is the amplifi er, USB, memory card,
disc player and tuner section in WHG-SLK10D.
• HCD-SLK20D is the amplifi er, USB, memory card,
disc player and tuner section in WHG-SLK20D.
Photo: HCD-SLK20D
Amplifier section
The following measured at AC 120 V –
240 V, 50/60 Hz
240 V, 50/60 Hz
HCD-SLK20D
Power output (rated):
55 W + 55 W (at 6
:, 1 kHz,
1% THD*)
* Total Harmonic Distortion
* Total Harmonic Distortion
Power output (reference):
90 W + 90 W (per channel at 6
:,
1 kHz)
HCD-SLK10D
Brazilian model:
RMS power output:
100 W (50 W per channel × 2, at 8
100 W (50 W per channel × 2, at 8
:,
1 kHz, 10% THD*)
* Total Harmonic Distortion
* Total Harmonic Distortion
Other models:
Power output (rated):
40 W + 40 W (at 8
40 W + 40 W (at 8
:, 1 kHz,
1% THD*)
* Total Harmonic Distortion
Power output (reference):
65 W + 65 W (per channel at 8
* Total Harmonic Distortion
Power output (reference):
65 W + 65 W (per channel at 8
:,
1 kHz)
Chinese model:
Power output (rated):
40 W + 40 W (at 8
40 W + 40 W (at 8
:, 1 kHz,
1% THD*)
* Total Harmonic Distortion
RMS output power (reference):
50 W + 50 W (per channel at 8
* Total Harmonic Distortion
RMS output power (reference):
50 W + 50 W (per channel at 8
:,
1 kHz)
Inputs
VIDEO/SAT VIDEO IN:
VIDEO/SAT VIDEO IN:
1 Vp-p, 75
:
VIDEO/SAT AUDIO IN:
Voltage 250/450 mV, impedance
47 k
47 k
:
Outputs
DVD VIDEO OUT:
DVD VIDEO OUT:
Max. output level 1 Vp-p, unbalanced,
Sync negative, load impedance 75
Sync negative, load impedance 75
:
i (headphones):
Accepts headphones of 8
: or more
SPEAKERS:
Use only the supplied speakers SS-
SLK20D (WHG-SLK20D) or SS-
SLK10D (WHG-SLK10D).
SLK20D (WHG-SLK20D) or SS-
SLK10D (WHG-SLK10D).
USB section
(USB) port: Type A
Maximum current: 500 mA
Memory card section
Multi memory card slot:
Compatible with “Memory Stick”
media, SD memory cards
media, SD memory cards
Disc player section
System:
Compact disc and digital audio and
video system
video system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6 μW
* This output is the value measurement
Laser Output*: Less than 44.6 μW
* This output is the value measurement
at a distance of 200 mm from the
objective lens surface on the Optical
Pick-up Block with 7 mm aperture.
objective lens surface on the Optical
Pick-up Block with 7 mm aperture.
Frequency response
DVD (PCM 48 kHz): 2 Hz – 22 kHz
(±1 dB)
CD: 2 Hz – 20 kHz (±0.5 dB)
(±1 dB)
CD: 2 Hz – 20 kHz (±0.5 dB)
Video color system format
Latin American models: NTSC
Other models: NTSC and PAL
Other models: NTSC and PAL
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
Tuning range
Brazilian model:
87.5 MHz – 108.0 MHz (100 kHz step)
Other models:
87.5 MHz – 108.0 MHz (50 kHz step)
87.5 MHz – 108.0 MHz (100 kHz step)
Other models:
87.5 MHz – 108.0 MHz (50 kHz step)
Antenna:
FM lead antenna
Antenna terminals:
75
: unbalanced
Intermediate frequency:
10.7 MHz
AM tuner section
Tuning range
Tuning range
Saudi Arabian model:
531 kHz – 1,602 kHz (9 kHz step)
Latin American models:
530 kHz – 1,710 kHz (10 kHz step)
531 kHz – 1,710 kHz (9 kHz step)
Other models:
531 kHz – 1,602 kHz (9 kHz step)
530 kHz – 1,610 kHz (10 kHz step)
531 kHz – 1,602 kHz (9 kHz step)
Latin American models:
530 kHz – 1,710 kHz (10 kHz step)
531 kHz – 1,710 kHz (9 kHz step)
Other models:
531 kHz – 1,602 kHz (9 kHz step)
530 kHz – 1,610 kHz (10 kHz step)
Antenna:
AM loop antenna
Antenna terminals:
External antenna terminal
Intermediate frequency:
450 kHz
General
Power requirements:
AC 120 V – 240 V, 50/60 Hz
Power consumption
HCD-SLK20D: 65 W
HCD-SLK10D: 55 W
HCD-SLK10D: 55 W
Dimensions (W/H/D) (excl. speakers):
Approx. 390 mm × 205 mm × 121 mm
Mass (excl. speakers): Approx. 3.4 kg
Quantity of the main unit: 1 piece
Quantity of the main unit: 1 piece
Supported file format
Media type
and file
format
format
DATA CD/DATA DVD
USB device
“Memory Stick”
media/SD memory
card
card
Audio
MP3
1)
(MPEG 1 Audio
Layer 3)
File extension: .mp3
Bitrate: 32 kbps – 320 kbps,
File extension: .mp3
Bitrate: 32 kbps – 320 kbps,
VBR
Sampling frequencies:
32/44.1/48 kHz
DRM: Not supported
MP3
1)
(MPEG 1 Audio Layer 3)
File extension: .mp3
Bitrate: 32 kbps – 320 kbps, VBR
Sampling frequencies: 32/44.1/48 kHz
DRM: Not supported
Bitrate: 32 kbps – 320 kbps, VBR
Sampling frequencies: 32/44.1/48 kHz
DRM: Not supported
WMA
2)
File extension: .wma
Bitrate: 48 kbps – 192 kbps
Sampling frequencies: 44.1 kHz
DRM: Not supported
Bitrate: 48 kbps – 192 kbps
Sampling frequencies: 44.1 kHz
DRM: Not supported
AAC
3)
File extension: .m4a
Bitrate: 48 kbps – 320 kbps
Sampling frequencies: 44.1 kHz
DRM: Not supported
Bitrate: 48 kbps – 320 kbps
Sampling frequencies: 44.1 kHz
DRM: Not supported
Video
Xvid
File extension: .avi
Video codec: Xvid video
Bitrate: 4.854 Mbps
Frame rate: 30 fps/25 fps
Resolution: 720 (width) × 480 (height) pixels/720 (width) × 576 (height) pixels
Audio codec: MP3
File extension: .avi
Video codec: Xvid video
Bitrate: 4.854 Mbps
Frame rate: 30 fps/25 fps
Resolution: 720 (width) × 480 (height) pixels/720 (width) × 576 (height) pixels
Audio codec: MP3
MPEG4
File format: MP4
File extension: .mp4/.m4v
Video codec:
File format: MP4
File extension: .mp4/.m4v
Video codec:
MPEG4 Simple Profile (AVC is not supported.)
Bitrate: 4 Mbps
Frame rate: 30 fps
Resolution: 720 (width) × 576 (height) pixels
Audio codec: AAC-LC (HE-AAC is not supported.)
Frame rate: 30 fps
Resolution: 720 (width) × 576 (height) pixels
Audio codec: AAC-LC (HE-AAC is not supported.)
DRM: Not supported
Media type
and file
format
format
DATA CD/DATA DVD
USB device
1)
MP3 PRO format is not supported.
2)
WMA Lossless and WMA PRO formats are not supported.
3)
Copyright-protected AAC files and AAC Lossless format are not supported.
4)
Less than 2,000,000 pixels for progressive JPEG format.
Design and specifications are subject to change without notice.
Image
JPEG
Image format: Interlace or progressive format, DCF conformity, 24-bit RGB
Image format: Interlace or progressive format, DCF conformity, 24-bit RGB
color
File extension: .jpg/.jpeg
Resolution:
Resolution:
8 (width) × 8 (height) pixels (MIN) – 3,071 (width) × 2,047 (height) pixels
(MAX)
(MAX)
4)
Standby power consumption: 0.5 W
Media type
and file
format
format
DATA CD/DATA DVD
USB device
“Memory Stick”
media/SD memory
card
card
HCD-SLK10D/SLK20D
2
NOTES ON CHIP COMPONENT REPLACEMENT
•
•
Never reuse a disconnected chip component.
•
Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
aged by heat.
FLEXIBLE CIRCUIT BOARD REPAIRING
•
•
Keep the temperature of soldering iron around 270 °C during
repairing.
repairing.
•
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
circuit board (within 3 times).
•
Be careful not to apply force on the conductor when soldering
or unsoldering.
or unsoldering.
SAFETY-RELATED COMPONENT WARNING!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous radia-
tion exposure.
Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous radia-
tion exposure.
0anufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
symbol are trademarks of Dolby Laboratories.
³DVD+RW,” “DVD-RW,” “DVD+R,”
“DVD VIDEO,” and the “CD” logos are
trademarks.
trademarks.
0PEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
Thomson.
³0emory Stick,”
,
³0HPRUy Stick Duo,”
, ³0DJLF*DWH
0HPRU\Stick,” ³0emory Stick PRO,”
, ³0HPRUy Stick
PRO Duo,”
,
³0HPRUy Stick PRO-HG Duo,”
, ³0HPRUy
StLFN0LFUo,” ,
,
³0HPRUy StLFN520´
, ³0agicGate,” and
are trademarks or
registered trademarks of Sony Corporation.
6DHC Logo is a trademark of SD-3C, LLC.
:indows0HGLa is either a registered
:indows0HGLa is either a registered
trademark or trademark of 0Lcrosoft
Corporation in the United States and/or other
countries.
Corporation in the United States and/or other
countries.
7his product contains technology subject to
certain intellectual property rights of
0LFUosoft. Use or distribution of this
technology outside of this product is
prohibited without the appropriate license(s)
frRP0LFURVRIt.
0LFUosoft. Use or distribution of this
technology outside of this product is
prohibited without the appropriate license(s)
frRP0LFURVRIt.
7HIS PRODUCT IS LICENSED UNDER
THE 03EG-4 VISUAL PATENT
PORTFOLIO LICENSE FOR THE
PERSONAL AND 121&200(RCIAL
USE OF A CONS80ER FOR
(i) ENCODING VIDE2,1&203/,$1&(
WITH THE 03EG-4 VISUAL STANDARD
(“03EG-4 VIDEO”)
AND/OR
(ii) DECODING 03EG-4 VIDEO THAT
WAS ENCODED BY $&21680(5
ENGAGED IN A PERSONAL AND NON-
&200(RCIAL ACTIVITY AND/OR WAS
OBTAINED FR20 A VIDEO PROVIDER
LICENSED BY 03EG LA TO PROVIDE
03EG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE
,0PLIED FOR ANY OTHER USE.
ADDITIONAL INFO50ATION
INCLUDING THAT RELATING TO
3520OTIONAL, INTERNAL AND
&200(RCIAL USES AND LICENSING
0$<BE OBTAINED )520 03EG LA,
LLC. SEE
PORTFOLIO LICENSE FOR THE
PERSONAL AND 121&200(RCIAL
USE OF A CONS80ER FOR
(i) ENCODING VIDE2,1&203/,$1&(
WITH THE 03EG-4 VISUAL STANDARD
(“03EG-4 VIDEO”)
AND/OR
(ii) DECODING 03EG-4 VIDEO THAT
WAS ENCODED BY $&21680(5
ENGAGED IN A PERSONAL AND NON-
&200(RCIAL ACTIVITY AND/OR WAS
OBTAINED FR20 A VIDEO PROVIDER
LICENSED BY 03EG LA TO PROVIDE
03EG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE
,0PLIED FOR ANY OTHER USE.
ADDITIONAL INFO50ATION
INCLUDING THAT RELATING TO
3520OTIONAL, INTERNAL AND
&200(RCIAL USES AND LICENSING
0$<BE OBTAINED )520 03EG LA,
LLC. SEE
http://www.mpegla.com/
$ll other trademarks and registered
trademarks are of their respective holders. In
this manual, 70and ® marks are not
specified.
this manual, 70and ® marks are not
specified.
This appliance is classified as a CLASS 1
LASER product. This marking is located on
the bottom exterior.
LASER product. This marking is located on
the bottom exterior.
When the self-diagnosis function is
activated to prevent the system from
malfunctioning, a service number appears
on the screen. The service number
consists of an alphabet and numerals (e.g.
C 1350). See the following table for the
cause and corrective action.
activated to prevent the system from
malfunctioning, a service number appears
on the screen. The service number
consists of an alphabet and numerals (e.g.
C 1350). See the following table for the
cause and corrective action.
Self-diagnosis function
First 3
characters of
characters of
the service
number
number
Cause and corrective
action
action
C 13
This disc is dirty.
Clean the disc with a
Clean the disc with a
soft cloth.
C 31
The disc is not inserted
correctly.
5estart the system,
correctly.
5estart the system,
then re-insert the disc
correctly.
correctly.
HCD-SLK10D/SLK20D
3
1.
SERVICING NOTES
............................................. 4
2. DISASSEMBLY
2-1. Disassembly
Flow
........................................................... 9
2-2. Top
Panel
Assy
................................................................ 10
2-3. Panel
Back
...................................................................... 10
2-4. Chassis
Block
.................................................................. 11
2-5. DMB19 Board Block-1 ................................................... 12
2-6. DMB19 Board Block-2 ................................................... 13
2-7. DMB19
2-6. DMB19 Board Block-2 ................................................... 13
2-7. DMB19
Board
................................................................. 13
2-8. Holder (Jack) Block ........................................................ 14
2-9. MD
2-9. MD
Block
....................................................................... 15
2-10. Power Block .................................................................... 15
2-11. Switching Regulator (SWR1) ......................................... 16
2-12. DISPLAY Board Block ................................................... 17
2-13. DISPLAY Board ............................................................. 18
2-14. MAIN Board-1 ................................................................ 19
2-15. MAIN Board-2 ................................................................ 20
2-16. LCD Module (LCD901) ................................................. 20
2-17. TOUCH PANEL Board ................................................... 21
2-18. DVD Mechanism Deck (CDM86S-DVBU101) ............. 22
2-19. Optical Pick-up Block (KHM-313CAB) ........................ 23
2-20. Belt (MOT) ..................................................................... 23
2-21. How To Bend Wire (Flat Type) ....................................... 24
2-11. Switching Regulator (SWR1) ......................................... 16
2-12. DISPLAY Board Block ................................................... 17
2-13. DISPLAY Board ............................................................. 18
2-14. MAIN Board-1 ................................................................ 19
2-15. MAIN Board-2 ................................................................ 20
2-16. LCD Module (LCD901) ................................................. 20
2-17. TOUCH PANEL Board ................................................... 21
2-18. DVD Mechanism Deck (CDM86S-DVBU101) ............. 22
2-19. Optical Pick-up Block (KHM-313CAB) ........................ 23
2-20. Belt (MOT) ..................................................................... 23
2-21. How To Bend Wire (Flat Type) ....................................... 24
3.
TEST MODE
............................................................ 26
4.
ELECTRICAL CHECK
......................................... 29
5. DIAGRAMS
5-1. Frame Printed Wiring Boards ......................................... 31
5-2. Block Diagram - SERVO Section - ................................ 32
5-3. Block Diagram - DSP Section - ...................................... 33
5-4. Block Diagram - AUDIO OUTPUT Section - ................ 34
5-2. Block Diagram - SERVO Section - ................................ 32
5-3. Block Diagram - DSP Section - ...................................... 33
5-4. Block Diagram - AUDIO OUTPUT Section - ................ 34
TABLE OF CONTENTS
5-5. Block Diagram - VIDEO Section - ................................. 35
5-6. Block Diagram - POWER SUPPLY Section - ................ 36
5-7. Printed Wiring Boards - DMB19 Section (1/2) - ............ 38
5-8. Printed Wiring Board - DMB19 Section (2/2) - ............. 39
5-9. Schematic Diagram - DMB19 Section (1/4) - ................ 40
5-10. Schematic Diagram - DMB19 Section (2/4) - ................ 41
5-11. Schematic Diagram - DMB19 Section (3/4) - ................ 42
5-12. Schematic Diagram - DMB19 Section (4/4) - ................ 43
5-13. Printed Wiring Board - DISPLAY Board - ..................... 44
5-14. Schematic Diagram - DISPLAY Board (1/3) - ............... 45
5-15. Schematic Diagram - DISPLAY Board (2/3) - ............... 46
5-16. Schematic Diagram - DISPLAY Board (3/3) - ............... 47
5-17. Printed Wiring Board - MAIN Section (1/2) - ................ 48
5-18. Printed Wiring Boards - MAIN Section (2/2) - .............. 49
5-19. Schematic Diagram - MAIN Section (1/4) - ................... 50
5-20. Schematic Diagram - MAIN Section (2/4) - ................... 51
5-21. Schematic Diagram - MAIN Section (3/4) - ................... 52
5-22. Schematic Diagram - MAIN Section (4/4) - ................... 53
5-23. Printed Wiring Boards - PANEL Section - .................... 54
5-24. Schematic Diagram - PANEL Section - .......................... 55
5-6. Block Diagram - POWER SUPPLY Section - ................ 36
5-7. Printed Wiring Boards - DMB19 Section (1/2) - ............ 38
5-8. Printed Wiring Board - DMB19 Section (2/2) - ............. 39
5-9. Schematic Diagram - DMB19 Section (1/4) - ................ 40
5-10. Schematic Diagram - DMB19 Section (2/4) - ................ 41
5-11. Schematic Diagram - DMB19 Section (3/4) - ................ 42
5-12. Schematic Diagram - DMB19 Section (4/4) - ................ 43
5-13. Printed Wiring Board - DISPLAY Board - ..................... 44
5-14. Schematic Diagram - DISPLAY Board (1/3) - ............... 45
5-15. Schematic Diagram - DISPLAY Board (2/3) - ............... 46
5-16. Schematic Diagram - DISPLAY Board (3/3) - ............... 47
5-17. Printed Wiring Board - MAIN Section (1/2) - ................ 48
5-18. Printed Wiring Boards - MAIN Section (2/2) - .............. 49
5-19. Schematic Diagram - MAIN Section (1/4) - ................... 50
5-20. Schematic Diagram - MAIN Section (2/4) - ................... 51
5-21. Schematic Diagram - MAIN Section (3/4) - ................... 52
5-22. Schematic Diagram - MAIN Section (4/4) - ................... 53
5-23. Printed Wiring Boards - PANEL Section - .................... 54
5-24. Schematic Diagram - PANEL Section - .......................... 55
6.
EXPLODED VIEWS
6-1. Top Panel Section ........................................................... 70
6-2. Back Panel Section ......................................................... 71
6-3. DMB19 Board Section .................................................... 72
6-4. DISPLAY Board Section ................................................ 73
6-5. Power Block Section ....................................................... 74
6-6. MAIN Board Section ...................................................... 75
6-7. Front Panel Section ......................................................... 76
6-8. Cover (CDM) Section ..................................................... 77
6-9. DVD Mechanism Deck Section
6-2. Back Panel Section ......................................................... 71
6-3. DMB19 Board Section .................................................... 72
6-4. DISPLAY Board Section ................................................ 73
6-5. Power Block Section ....................................................... 74
6-6. MAIN Board Section ...................................................... 75
6-7. Front Panel Section ......................................................... 76
6-8. Cover (CDM) Section ..................................................... 77
6-9. DVD Mechanism Deck Section
(CDM86S-DVBU101) .................................................... 78
7.
ELECTRICAL PARTS LIST
.............................. 79
HCD-SLK10D/SLK20D
4
SECTION 1
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated by
the charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The fl exible board is easily damaged and should be handled with
care.
static break-down because of the potential difference generated by
the charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The fl exible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused
on the disc refl ective surface by the objective lens in the optical
pickup block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
The laser beam on this model is concentrated so as to be focused
on the disc refl ective surface by the objective lens in the optical
pickup block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
• Strong
viscosity
Unleaded solder is more viscous (sticky, less prone to fl ow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
RELEASING THE DISC SLOT LOCK
The disc slot lock function for the antitheft of an demonstration
disc in the store is equipped.
The disc slot lock function for the antitheft of an demonstration
disc in the store is equipped.
Releasing Procedure:
1. Press the [
1. Press the [
?/1
] button to turn on the system.
2. Touch the [HOME] sensor.
3. Touch the [
3. Touch the [
M
], [
m
], [
<
] and [
,
] sensors to select the “CD/
DVD”, and touch the [ENTER] sensor.
4. Touch the [
x
] sensor and press the [
Z
] button simultaneously,
and hold for more than fi ve seconds.
5. The message “UNLOCKED” is displayed on the liquid crystal
display module and the disc slot is unlocked.
Note: When “LOCKED” is displayed, the disc slot lock is not released by
turning power on/off with the [?/1] button.
NOTE THE IC102 AND IC103 ON THE DMB19 BOARD
REPLACING
IC102 and IC103 on the DMB19 board cannot exchange with
single. When these parts are damaged, exchange the complete
mounted board.
REPLACING
IC102 and IC103 on the DMB19 board cannot exchange with
single. When these parts are damaged, exchange the complete
mounted board.
NOTE THE CN406 ON THE DISPLAY BOARD RE-
PLACING
CN406 on the DISPLAY board cannot exchange with single.
When this part is damaged, exchange the complete mounted board.
PLACING
CN406 on the DISPLAY board cannot exchange with single.
When this part is damaged, exchange the complete mounted board.
NOTE FOR REPLACEMENT OF THE MS-214 BOARD
When the MS-214 board is defective, exchange the entire CDM86
(S) ASSY.
When the MS-214 board is defective, exchange the entire CDM86
(S) ASSY.
NOTE FOR REPLACEMENT OF THE TOUCH PANEL
BOARD
When the TOUCH PANEL board is defective, exchange the entire
mounted board.
BOARD
When the TOUCH PANEL board is defective, exchange the entire
mounted board.
MODEL IDENTIFICATION
– Rear view –
Model
Number
Label
Number
Label
Model
Part No.
HCD-SLK20D: 120V AC area in E,
Chilean and Peruvian models
Chilean and Peruvian models
4-281-621-0[]
HCD-SLK20D: Mexican model
4-281-622-0[]
HCD-SLK20D: Indian model
4-281-624-0[]
HCD-SLK10D: Brazilian model
4-281-626-0[]
HCD-SLK10D: Singapore model
4-281-627-0[]
HCD-SLK10D: Thai model
4-281-628-0[]
HCD-SLK10D: Chinese model
4-281-629-0[]
HCD-SLK20D: Saudi Arabia model
4-289-306-0[]
CAPACITOR ELECTRICAL DISCHARGE PROCESSING
When checking the board, the electrical discharge is necessary for
the electric shock prevention.
Connect the resistors referring to the fi gure below.
When checking the board, the electrical discharge is necessary for
the electric shock prevention.
Connect the resistors referring to the fi gure below.
• Switching regulator (C201, C202)
Both ends of respective capacitors.
– Switching Regulator (Conductor Side) –
T101
C202
C201
800
:/2 W
800
:/2 W