DOWNLOAD Sony HCD-SLK10D / HCD-SLK20D / WHG-SLK10D / WHG-SLK20D Service Manual ↓ Size: 5.37 MB | Pages: 94 in PDF or view online for FREE

Model
HCD-SLK10D HCD-SLK20D WHG-SLK10D WHG-SLK20D
Pages
94
Size
5.37 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
hcd-slk10d-hcd-slk20d-whg-slk10d-whg-slk20d.pdf
Date
PREV: Sony SRS-D555 Service Manual

Sony HCD-SLK10D / HCD-SLK20D / WHG-SLK10D / WHG-SLK20D Service Manual ▷ View online

HCD-SLK10D/SLK20D
21
2-17.  TOUCH  PANEL  BOARD
– Front panel inner view –
holder (sensor)
TOUCH PANEL board
tape
tape
‡ :ire VettinJ
1 five screws
 (BVTP2.6)
3 holder (sensor)
2 two claws
– Rear bottom view –
4
6 TOUCH PANEL board
TOUCH PANEL board
tape
terminal side
‡ :ire VettinJ
Note 1: Please spread a sheet under a unit
 
not to injure front panel.
5 wire (flat type) (11 core)
 (CN801)
 Note 
2: When you insert the wire (flat type) (11 core) 
 
 
in CN801 on TOUCH PANEL board, it is not 
 
 
necessary to make a mistake in the terminal 
 
 
side of the wire (flat type) (11 core). 
Note 3: When you install the wire (flat type), please 
 
install them correctly.
 
There is a possibility that this machine damages 
 
when not correctly installing it.
Insert is straight 
to the interior.
connector
Insert is incline.
wire 
(flat type)
wire 
(flat type)
connector
OK
NG
Note 4: Do not insert the wire (flat type) in the same amount of 
 
connector by mistake. Refer to 
“2-21. HOW TO BEND 
 WIRE 
(FLAT 
TYPE)” (page 24) and “5-1. FLAME  
 
PRINTED  WIRING  BOARDS” (page 31) for details.
HCD-SLK10D/SLK20D
22
2-18.  DVD  MECHANISM  DECK (CDM86S-DVBU101)
1 two screws
 (BVTP3 
u 8)
1 two screws
 (BVTP3 
u 8)
2 cover (CDM) 86S block
3 two claws
4 two claws
6 flexible flat cable 24P
flexible flat 
cable
flexible flat 
cable
7 sheet (BU)
8 DVD mechanism deck
 (CDM86S-DVBU101)
4 two claws
– DVD mechanism deck block bottom view –
MD block
holder (FFC)
flexible flat cable 24P
optical pick-up
– MD block rear top view –
– DVD mechanism deck block bottom view –
‡ 3ower cord settinJ
Insert is straight 
to the interior.
connector
Insert is incline.
connector
OK
NG
5 holder (FFC)
 Note 
1: The holder (FFC) is not 
  
supplied. 
 
 
Please detach from the 
 
 
former unit, and install 
 
 
it in a new unit again.
Note 2: When you install the flexible flat cable, please 
 
install them correctly.
 
There is a possibility that this machine damages 
 
when not correctly installing it.
HCD-SLK10D/SLK20D
23
2-19.  OPTICAL  PICK-UP  BLOCK (KHM-313CAB)
2-20. BELT (MOT)
– DVD mechanism deck block bottom view –
1 belt (MOT)
– DVD mechanism deck block bottom view –
1 four  insulator screws
2
4 insulator
3 connector
5 optical pick-up block
 (KHM-313CAB)
4 insulator
4 insulator
4 insulator
HCD-SLK10D/SLK20D
24
2-21.  HOW  TO  BEND  WIRE (FLAT  TYPE)
– Continued on next page –
‡ZLUHIODWW\SHFRUHOHQJWKPP5HI1R
‡ZLUHIODWW\SHFRUHOHQJWKPP5HI1R
‡ZLUHIODWW\SHFRUHOHQJWKPP5HI1R
‡ZLUHIODWW\SHFRUHOHQJWKPP5HI1R
‡ZLUHIODWW\SHFRUHOHQJWKPP5HI1R
‡ZLUHIODWW\SHFRUHOHQJWKPP5HI1R
‡ZLUHIODWW\SHFRUHOHQJWKPP5HI1R
MAIN board
(CN302)
MAIN board
(CN103)
KEY_RIGHT board
(CN263)
KEY_LEFT board
(CN262)
KEY_LEFT board
(CN261)
JACK board
(CN705)
60 mm
40 mm
5 mm
15 mm
tuner (FM/AM) (TU1)
The upper side
is contact side. 
The upper side
is contact side. 
The lower side
is contact side. 
22 mm
25 mm
103 mm
198 mm
20 mm
10 mm
The lower side
is contact side. 
250 mm
The upper side
is contact side. 
The lower side
is contact side. 
MS-214 board
(CN001)
DMB19 board
(CN202)
The lower side
is contact side. 
51 mm
121 mm
15 mm
7 mm
DISPLAY board
(CN604)
The upper side
is contact side. 
The lower side
is contact side. 
BUZZER board
(CN703)
28 mm
76 mm
23 mm
MAIN board
(CN105)
The upper side
is contact side. 
The lower side
is contact side. 
160 mm
DISPLAY board
(CN408)
MAIN board
(CN101)
The upper side
is contact side. 
The upper side
is contact side. 
Page of 94
Display

Click on the first or last page to see other HCD-SLK10D / HCD-SLK20D / WHG-SLK10D / WHG-SLK20D service manuals if exist.

RANDOM: