DOWNLOAD Sony DAV-TZ215 / DAV-TZ715 / HBD-TZ215 / HBD-TZ715 Service Manual ↓ Size: 3.7 MB | Pages: 72 in PDF or view online for FREE

Model
DAV-TZ215 DAV-TZ715 HBD-TZ215 HBD-TZ715
Pages
72
Size
3.7 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
dav-tz215-dav-tz715-hbd-tz215-hbd-tz715.pdf
Date
PREV: Sony DAV-TZ215 / DAV-TZ715 Service Manual

Sony DAV-TZ215 / DAV-TZ715 / HBD-TZ215 / HBD-TZ715 Service Manual ▷ View online

HBD-TZ215/TZ715
9
2-5.  FL  BOARD,  USB  KEY  BOARD,  KZ-USB  BOARD
7 connector
 (CN2101)
qa connector
 (CN5201)
6 Lift up two lead pins.
1 wire (flat type) 
 (11 
core)
 (CN5005)
2 screw
     (BV3 (3-CR))
2 screw
     (BV3 (3-CR))
8 screw
     (BV3 (3-CR))
0 screw
     (BV3 (3-CR))
9 guide (cord)
3 FL board
FL board
qs KZ-USB board
5 USB KEY board
4 three claws
‡$UUDQJLQJWKH86%ZLUH
‡:LUHIODWW\SHFRUHVHWWLQJ
Have the USB wire spread on the inside 
of the claws of the chassis.
USB wire
USB wire
heat sink
heat sink
CN3000
CN509
CN906
red
black
Tie up with LP3002.
Tie up with LP501.
Draw the USB wire through CN3000.
Keep a distance of more than 6.5 mm 
between the wire and CN901. 
Keep the wire tied up from lying on 
the heat sink and the POWER board.
Keep the wire tied up from lying on 
the heat sink and the POWER board.
POWER board
CN901
32 ± 1 mm
HBD-TZ215/TZ715
10
2-6.  KEY-SW  BOARD,  P-SW  BOARD
– Bottom view –
5 eight claws
7 two claws
9 two claws
4 five screws
 (BTP 
2 
u6)
6
0 P-SW board
P-SW board
8 KEY-SW board
KEY-SW board
1 connector
 (CN5301)
2 connector
 (CN5201)
3 connector
 (CN5202)
‡ Wire (flat type) (11 core) setting
– Inner view –
HBD-TZ215/TZ715
11
2-7.  BACK  PANEL  BLOCK
3
5 screw
 (B3 
u6)
4 wire (flat type) (9 core)
 (CN400)
7 back panel block
1 power cord connector
 (CN901)
CN901
LF901
POWER board
2 Remove the power cord
  from the ditch.
Power cord
6 two screws
     (BV3 (3-CR))
6 three screws
     (BV3 (3-CR))
‡3RZHUFRUGVHWWLQJ
6 mm
cord bush (2104)
power cord
190 + 5 mm
rear side
HBD-TZ215/TZ715
12
2-8.  DVD  MECHANISM  DECK (CDM85MB-DVBU102)
Note 1: Before disconnecting the wire (fl at type) (24 core) of optical pick-up block, solder the short-land.
5 Solder the short-land.
Note 2: When assembling the optical
 
pick-up block, remove the solder
 
of short-land after connecting the
 
wire (flat type) (24 core).
3 three screws
 (BV3 
(3-CR))
7 DVD mechanism deck
 (CDM85MB-DVBU102)
DVD mechanism deck
(CDM85MB-DVBU102)
MAIN board
6 wire (flat type) (24 core)
 (CN1101)
4
2 connector
 (CN1501)
1 wire (flat type) (5 core)
 (CN1502)
‡:LUHVHWWLQJ
rear side
Page of 72
Display

Click on the first or last page to see other DAV-TZ215 / DAV-TZ715 / HBD-TZ215 / HBD-TZ715 service manuals if exist.

RANDOM: