Sony CMT-G2BNIP / CMT-G2NIP / HCD-G2BNIP / HCD-G2NIP Service Manual ▷ View online
HCD-G2BNiP/G2NiP
5
HOW TO OPEN THE TRAY WHEN POWER SWITCH TURN OFF
MAIN BOARD SERVICE POSITION
1
Insert the hard metal fittings of L character type 6 cm
or more in the hole of the chassis.
2
Push the lever in the direction
of the arrow
A.
3
6 cm or more
– Rear bottom view –
hole
lever
– Bottom view –
A
MAIN board
AMP board
lug wire
alligator clips
Note: Connect the alligator clips surely with this position.
HCD-G2BNiP/G2NiP
6
CD MECHANISM DECK SERVICE POSITION
FL-NET, JOG1, JOG2, USB AND HP BOARD SERVICE POSITION
FL-NET board
USB board
HP board
JOG2 board
JOG1 board
insulating sheet
CD mechanism deck
(CDM77B-K6BD94DC)
(CDM77B-K6BD94DC)
BD94DC board
MAIN board
front panel block
MOTOR board
HCD-G2BNiP/G2NiP
7
SUB-PT BOARD SERVICE POSITION
AMP BOARD SERVICE POSITION
MAIN board
SUB-PT board
lug wire
AMP board
CN103
MOTOR board
Connect extension jig (Part No. J-2501-212-A)
to the AMP board (CN103) and MOTOR board.
to the AMP board (CN103) and MOTOR board.
MAIN board
alligator clips
Note: Connect the alligator clips surely with this position.
HCD-G2BNiP/G2NiP
8
DCDC BOARD SERVICE POSITION
TUNER AND DAB BOARD SERVICE POSITION
DCDC board
MAIN board
DAB board
TUNER board
MAIN board
CN407
(OK)
(OK)
module (DAB tuner)
(DAB1)
(DAB1)
(G2BNiP)
Note: Both the flexible flat cable (9 core) can be connected
with the CN406 or CN407 on MAIN board.
When you connect the flexible flat cable (9 core) with
the CN407 on MAIN board so as not to connect it by
mistake.
CN406
(NG)
(NG)
Click on the first or last page to see other CMT-G2BNIP / CMT-G2NIP / HCD-G2BNIP / HCD-G2NIP service manuals if exist.