Sony BDV-L600 / BDV-L800 / BDV-L800M / HBD-L600 / HBD-L800 / HBD-L800M Service Manual ▷ View online
HBD-L600/L800/L800M
25
2. Menu
Tree
Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[9] HDD Mode
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[9] HDD Mode
Version Up
Not used
Not used
System Information
Displays system information
Displays system information
Factory Initialize
Initialize default setting
Initialize default setting
Log
Displays Error Log
Displays Error Log
Error Log
Displays error log
Diag
Network
Network diagnosis for wired
Network diagnosis for wired
Ping
Confirm network connection
Ifconfig
View network status
Device Test
US%D$CIFcon test
US%D$CIFcon test
Video Test
Video output test
Video output test
$udio Test
$udio output test
$udio output test
$udio Input Test
$udio Input Test
$udio Input Test
:ireless L$N Test
Not used
Not used
EMC Test Mode
Not used
Not used
Drive
Write drive OP data and check drive
Write drive OP data and check drive
HDD Mode
Not used
Not used
Start Update for %DV
Not used
Start Update for %DP
Not used
Start Initialize
Initialize default setting for the unit
Diag Test
Transcoder Test
Not used
Not used
HDMI Input Test
HDMI Input Test
HDMI Input Test
Mic Test
Not used
Not used
HBD-L600/L800/L800M
26
3. Service Mode Menu (Top Menu)
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1]
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1]
Moves to Diag screen
[2]
Moves to Log screen
[3]
Moves to Factory Initialize screen
[4]
Moves to Network screen
[5]
Moves to Version Up (DISC version update) screen (Not
used)
used)
[6]
Moves to System Information screen
[7]
Moves to EMC test mode screen (Not used)
[8]
Moves to Drive screen
[9]
Moves to HDD mode (Not used)
[
M
]/[
m
] Moves the cursor
[
]
Moves to the screen of the item selected with the cursor
* Cursor is not displayed when the menu is fi rst displayed.
Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[9] HDD mode
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[9] HDD mode
HELP : [DOWN] [ENT] [(NUM)]
HELP (currently available keys, etc.) is displayed
[1] Diag
4. Diag (Device Test)
This screen is used to test devices mounted on the board.
This screen is used to test devices mounted on the board.
Screen 1: Selects the test category
Operation:
[
Operation:
[
<
]/[
,
]
Selects the category
[
m
]/[
]
Moves to the selected category
[RETURN] Returns to the service top menu
Screen 2: Device test
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
<
]/[
,
]
Selects the device to test
[
]
Executes the test
[
M]
Returns to selection of test category
[RETURN] Returns to selection of test category
•
List of test categories
Device Test
Video Test
Audio Test
Audio Input Test
Wireless LAN Test (not used)
Mic Test (not used)
HDMI Input Test
Transcoder Test (not used)
Video Test
Audio Test
Audio Input Test
Wireless LAN Test (not used)
Mic Test (not used)
HDMI Input Test
Transcoder Test (not used)
Diag
Category:
Diag
Category: Device Test
Device:
Rear USB Media check ... OK
Front USB Media check ... OK
Front USB Media check ... OK
Checking...
HELP: [RIGHT] [UP] [ENT] [RET]
USB Host
Device Test
(Screen 1)
(Screen 2)
•
Device Test: List of devices
USB Host
: USB media check. Only one time.
Note: “left and rear” is shown for this unit though the
screen display is “front and rear”.
D/A Converter : DAC wtite check (non-verifi cation).
Ifcon
Ifcon
: Not used in this unit.
MIC
: Not used in this unit.
MFI
: MFI read/write Check
IPC
: Device ID check
External HDMI : Revision check
Transcorder
Transcorder
: Not used
5. Diag (Video/Audio Test)
This screen performs video and audio tests.
This screen performs video and audio tests.
Screen 1: When video test category is selected
Operation:
[
Operation:
[
]
Shows/hides the color bar
[
M
]/[RETURN] Returns to the selection of test category
Screen 2: When audio test category is selected
Operation:
[
Operation:
[
]
Plays back/stops the tone sound
[
M
]/[RETURN] Returns to the selection of test category
• Video
test:
Outputs a color bar (composite & component & HDMI).
• Audio
test:
TONE sound output (speaker & HDMI).
Diag
Category: Video Test
HELP: [UP][ENT][RET]
Diag
Category: Audio Test
HELP: [UP] [ENT] [RET]
[ENT] Show Color Bar
[ENT] Generate TONE Sound
(Screen 1)
(Screen 2)
HBD-L600/L800/L800M
27
6. Diag (Audio Input Test)
This screen performs audio input test.
This screen performs audio input test.
Screen 1: Select Audio Input Test Category
Operation:
[
Operation:
[
<]/[,] Selects the category
[
m]/[ ]
Activate the selected category
[RETURN] Returns to the service top menu
Screen 2: Select Input Device
After “Audio Input Test” selects in Screen 1, the device to test is
chosen.
Operation:
[
After “Audio Input Test” selects in Screen 1, the device to test is
chosen.
Operation:
[
M]/[m] Selects
Device
[
]
Activate and Start Test/Stop
[RETURN] Returns to the selection of test category
•
Device Test
: Device List
Digital Input1
: CXD9998 is inputted from ARC
Digital Input2
: CXD9998 is inputted from Optical
Analog Input
: CXD9998 is inputted from AUDIO
• Audio
Input
Test
CXD9998 is inputted from DIR/analog and outputs LineOut (8ch)
L and R.
Check tone sound by speaker connected with LineOut (8ch) L and
R.
(Input; LPCM 48kHz 2ch)
L and R.
Check tone sound by speaker connected with LineOut (8ch) L and
R.
(Input; LPCM 48kHz 2ch)
Diag
Category:
Diag
Category: Audio Input Test
Device:
Device:
[ENT] Start Input Sound
HELP: [LEFT] [RIGHT] [UP] [DOWN] [ENT] [RET]
Audio Input Test
Digital Input 1
Digital Input 2
Analog Input
(Screen 1)
(Screen 2)
[ ]
Diag
Category: Audio Input Test
Device:
Device:
[ENT] Stop Input Sound
HELP: [LEFT] [RIGHT] [UP] [DOWN] [ENT] [RET]
[ ]
Digital Input 1
Digital Input 2
Analog Input
7. Diag (Wireless LAN Test)
This screen performs wireless LAN test.
This screen performs wireless LAN test.
Note: This mode doesn’t operate correctly. Never use this mode. Refer to
“CHECKING METHOD OF NETWORK OPERATION” on page
9 when you confi rm the wireless LAN operation.
9 when you confi rm the wireless LAN operation.
8. Diag (MIC Input Test)
This screen performs MIC input test.
This screen performs MIC input test.
Note: Not used for the servicing.
9. Diag (HDMI Input Test)
This screen performs HDMI input test.
This screen performs HDMI input test.
Screen 1: Select HDMI Input Test Category
Operation:
[
Operation:
[
<]/[,] Selects the category
[
m]/[ ]
Activate the selected category
[RETURN] Returns to the service top menu
Screen 2: Select Input Device
After “HDMI Input Test” selects in Screen 1, the device to test is
chosen.
Operation:
[
After “HDMI Input Test” selects in Screen 1, the device to test is
chosen.
Operation:
[
M]/[m] Selects
Device
[
]
Activate and Start Test/Stop
[RETURN] Returns to the selection of test category
•
Device Test
: Device List
HDMI Input1
: CXD9998 is inputted from HDMI1
HDMI Input2
: CXD9998 is inputted from HDMI2
• HDMI
Input
Test
Path test from HDMI to HDMI through CXD9998.
CXD9998 is selected and inputted HDMI IN and outputs HDMI
OUT.
Check Video and Audio by TV/AMP connected with HDMI.
CXD9998 is selected and inputted HDMI IN and outputs HDMI
OUT.
Check Video and Audio by TV/AMP connected with HDMI.
Diag
Category:
Diag
Category: HDMI Input Test
HELP: [UP] [ENT] [RET]
HDMI Input Test
[1] HDMI Input1 Test
[2] HDMI Input2 Test
[2] HDMI Input2 Test
The video and audio connected with
HDMI1 or HDMI2 are outputted to TV monitor
HDMI1 or HDMI2 are outputted to TV monitor
(Screen 1)
(Screen 2)
[ ]
HELP: [LEFT] [RIGHT] [UP] [DOWN] [ENT] [RET]
[ ]
10. Diag (Transcoder Test)
Note: Not used for the servicing.
HBD-L600/L800/L800M
28
11. Log: Error Log (Output of each Log)
This screen displays the contents of each log.
This screen displays the contents of each log.
Note: Do not refer to the displayed date.
Screen 1: Selects log
Operation:
[1]/[
Operation:
[1]/[
]
Moves to the Error Log output screen
[RETURN] Returns to the top menu of the service mode
Screen 2: Displays the Error Log
Operation:
[
Operation:
[
<
]
Returns to the previous page
[
,
]
Moves to the next page
[RETURN] Returns to the screen (Screen 1) that selects the log
type
[RED]
Writes the log contents to an USB memory device
•
Viewing the log display
Error Log:
08/01/01 00: 53: 19: [ErrCode: 080400000000]
[Date] [Time] [Error code]
About copying log to USB memory device:
Press the [RED] button in each log display screen with the USB
memory device inserted into the unit.
Press the [RED] button in each log display screen with the USB
memory device inserted into the unit.
Note: Please do not press the [RED] button immediately after USB mem-
ory is inserted.
Please do not pull out USB memory immediately after the [RED]
button was pressed.
Error Log:
When
When
“getErrLogFile.trm
fi le” exists in the USB memory de-
vice, errlog.log fi le is output.
Select Log
HELP : [DOWN][ENT][(NUM)]
Error Log
08/01/01 00: 53: 19: [ErrCode: 080400000000]
08/01/01 00: 53: 45: [ErrCode: 080400252100]
08/01/01 00: 54: 00: [ErrCode: 080400005555]
08/01/01 00: 53: 45: [ErrCode: 080400252100]
08/01/01 00: 54: 00: [ErrCode: 080400005555]
:
:
:
[1] Error Log
(Screen 1)
(Screen 2)
12. Factory Initialize (Factory Settings)
There is a possibility that this mode cannot be correctly execut-
ed. Never use this mode.
ed. Never use this mode.
13. Network (Network Test Diagnosis Screen: Ifconfi g)
Network menu for the wired ethernet.
Network menu for the wired ethernet.
Screen 1: Ifconfi g Test
Operation:
[
Operation:
[
] Activate Ifconfi g (Display network setting)
[
,]
Select ping test
[RETURN] Returns to the top menu of the service mode
Screen 2: Ping Test
Operation:
[
Operation:
[
<
] Select
Ifconfi g test
[RETURN] Returns to the top menu of the service mode
(The details of a Ping test are “14. Network (Network Test Diagno-
sis Screen: Ping)”)
(The details of a Ping test are “14. Network (Network Test Diagno-
sis Screen: Ping)”)
Screen 3: Ifconfi g Test Active
Display Ifconfi g command results.
Operation:
[
Display Ifconfi g command results.
Operation:
[
] Ifconfi g retry
[
,] Select
Ping Test
[RETURN] Returns to the top menu of the service mode
Network
Test:
Ifconfig
Ping
HELP : [DOWN][ENT][(NUM)]
(Screen 1)
Network
HELP : [DOWN][ENT][(NUM)]
Network
(Screen 2)
(Screen 3)
Test: Ifconfig
Ping
[START]
Ping To:
Test:
Ifconfig
Ping
IP 192. 168. 11. 2 MAC 00-16-01-85-21-A3
HELP : [ENT]: Re/Exe [RIGHT]
Click on the first or last page to see other BDV-L600 / BDV-L800 / BDV-L800M / HBD-L600 / HBD-L800 / HBD-L800M service manuals if exist.