Sharp VC-S2000 (serv.man22) User Manual / Operation Manual ▷ View online
26
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
ADVANCED OPERATION
PLAYBACK OF A VIDEO TAPE
PLAYING BACK AN NTSC TAPE
NTSC (National Television Standards Committee) is a different TV standard to PAL and is used
in some Non-European Countries. Your VCR can playback pre-recorded NTSC tapes onto a
PAL system TV, but cannot record an NTSC signal onto a video tape.
Note that..
•
You cannot record NTSC signals or dub NTSC tapes onto other VCR’s from this VCR.
•
You cannot use Slow speed, Still frame, Double Speed, Frame Advance or Tape
Remaining with a pre-recorded NTSC tape.
•
On some televisions, the picture may appear in black and white or there may be no
picture. This does not indicate a fault with your VCR.
•
On some televisions, the picture may shrink vertically causing black bands to appear at
the top and bottom of your screen.
•
On some televisions, the played-back picture may roll vertically, this does not indicate a
fault with your VCR.
SUPER-VHS (S-VHS)
Your VCR is capable of recording and playing back on an S-VHS cassette. This standard of
video cassette will give you increased picture quality. You will only be able to record S-VHS if
S-VHS in the Mode Menu is selected to AUTO.
video cassette will give you increased picture quality. You will only be able to record S-VHS if
S-VHS in the Mode Menu is selected to AUTO.
TINS-3894 ENGLISH.book Page 26 Wednesday, September 6, 2000 11:53 AM
27
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
ADVANCED OPERATION
MODE SELECTION
Press
MENU
to display the main menu on the
screen. The main menu has four options
including MODE.
1.
To access the mode menu highlight MODE
using the [
/
] buttons, then press
SET
.
2.
Highlight the option to be changed using
the [
/
] buttons. Press [
/
] to
select AUTO, ON or OFF as appropriate,
press
SET
then
MENU
to return to the
normal screen.
NICAM.
Selecting OFF will disable the
NICAM sound reception.
COLOUR.
If the VCR is playing a poor quality
recording, the picture may turn black and
white. Selecting PAL may reduce this
(depending on the recording), although
coloured speckles will appear on black and
white recordings.
BLUE MUTE.
This enables the blue background colour. That is, the TV screen will be blue if
a TV channel with no signal is selected, an unrecorded section of tape is played or the quality
of the recording on the tape is poor. Select OFF to disable this feature.
REPEAT.
If you want to playback repeatedly an entire video tape, this feature will
automatically rewind at the end of the tape and replay. This function enables or disables this
feature.
AUDIO MIX.
When this function is switched ON the VCR will playback both Hi-Fi and Mono
audio tracks.
→
N I CAM
AU T O
O F F
CO L OUR
AU T O
P A L
B L U E MU T E
AU T O
O F F
R E P E A T
ON
O F F
AUD I O M I X
ON
O F F
1 6 : 9
AU T O
O F F
POWE R S A V E
AU T O
O F F
2 / 2
: S E L E C T
: CHANGE
S E T
: E N T E R
ME NU : E X I T
ME NU
V I D EOP L U S
T I ME R
T I ME R
MOD E
S E T U P
: S E L E C T
S E T
: E N T E R ME NU : E X I T
1.
2.
TINS-3894 ENGLISH.book Page 27 Wednesday, September 6, 2000 11:53 AM
28
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
ADVANCED OPERATION
MODE SELECTION
16:9 PLAYBACK AND RECORDING.
This feature allows the PLAYBACK and RECORDING of wide screen format signals (16.9) which
should automatically change the picture size setting on a wide screen TV. To allow the
operation of this feature, ensure 16:9 mode is set to AUTO in the MODE menu.
A scart connection must be used between the VCR (SOCKET L1) and the TV.
During PLAYBACK of a 16:9 encoded tape the TV should switch to (Widescreen) 16:9 mode.
NOTES:
POWERSAVE.
This feature allows the VCR power consumption to be
≤1.5 Watt in
POWERSAVE mode. Auto POWERSAVE mode will engage if the VCR is not operated for 3
hours.
S-VHS.
Selecting Auto will enable your VCR to
record in Super-VHS format provided an S-VHS
cassette is being used, or in the S-VHS ET
(Expansion Technology) format when using a
VHS cassette and the S-VHS ET button on the VCR
front panel is pressed (S-VHS ET will only work in SP
mode).
L1 OUT.
You can select the output of L1 to be either a composite signal where one path is
used for the video information or a Y/C signal, where the luminance (Y) and the colour (C)
information are separated and two paths are used for the video information. This will enhance
picture quality.
L2 IN.
The input of L2 can be changed between composite input or Y/C input. Y/C input will
enhance the picture quality.
• Not all pre recorded tapes are compatible with 16:9 playback.
• This feature must be supported by TV’s equipped with 16:9 switching.
• 16:9 format recording can only be made from L2 scart input.
2 / 2
S - V H S
AU T O
O F F
L 1
OU T
COMP .
Y / C
L 2
I N
COMP .
Y / C
: S E L EC T
: CHANGE
S E T : E N T E R
ME NU : E X I T
TINS-3894 ENGLISH.book Page 28 Wednesday, September 6, 2000 11:53 AM
29
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
ADVANCED OPERATION
SEARCHING THE VIDEO TAPE
SKIP SEARCHING THE VIDEO TAPE
You can search the tape in 30 second time intervals. To do this follow the procedure below:
1.
Press
PLAY/X2
(
) to start the video tape playing.
2.
Press
SKIP SEARCH
on the remote control.
The number of times you press
SKIP SEARCH
determines the forward search time.
•
After searching, normal playback
will resume automatically.
DIGITAL PROGRAMME SEARCH SYSTEM (DPSS)
Your VCR records a marker signal on the tape at the start of each recording. These signals can
be used later to locate the starting point of a recording.
Press
DPSS
to locate a previous programme or the next programme.
For example,
1.
Load the video tape into the VCR.
2.
Press
DPSS
three times. The number 3 will appear on the on-screen display, and the
VCR will fast forward to locate the third recording after the current one.
3.
Press
DPSS
once. A -1 will appear on the on-screen display and the VCR will rewind
to locate the beginning of the current recording.
4.
To cancel the search before it has finished, press
STOP
(
) or
PLAY/X2
(
) .
NOTES:
•
Recordings must be longer than 3 minutes..
•
The starting point of playback may vary.
•
This feature will only work with video tapes recorded on a VCR with the DPSS feature.
/
-1
+1
+2
+3
RECORDING 5
RECORDING 4
RECORDING 3
RECORDING 2
RECORDING 1
DPSS Signals
Current tape position
Fast Forward
Rewind
DPSS
Number
Number
1 press = 30 seconds
2 presses = 1 minute
3 presses = 1 minute 30 seconds
4 presses = 2 minutes
2 presses = 1 minute
3 presses = 1 minute 30 seconds
4 presses = 2 minutes
TINS-3894 ENGLISH.book Page 29 Wednesday, September 6, 2000 11:53 AM
Click on the first or last page to see other VC-S2000 (serv.man22) service manuals if exist.