DOWNLOAD Sharp LC-70UD20KN (serv.man4) Service Manual ↓ Size: 3.86 MB | Pages: 94 in PDF or view online for FREE

8.2. Exiting the Public Mode Setting screen
There are two following ways to exit the Public Mode setting screen:

1) Turn off the power.
2) Select “Execution” in the PUBLIC_Mode to execute it.

Activate the restart under the set content.

Here, the START input SOURCE setting is excluded since this item is referred to only when the power is turned on.

• 

When the shipment setting is done, a set each value in Public Mode is initialized.

  (PUBLIC MODE in the process mode Setting of a fl ag is also initialized)

• 

Separately, the shipment beginnings when all except for each set value in Public Mode is initialized are provided 

for a process mode. (INDUSTRY INIT (-Public))

• 

Only when turning on the PUBLIC MODE item, each setting is effective.

• 

After it decides it with EXECUTE, it AC OFF/ON it to refl ect a set value.

• 

8.5. Operation after “RESET”
Select “RESET” in the PUBLIC Mode, and it operates as follows when it is executed (refer to the basic operation).

• 

The set contents in the PUBLIC mode are initialized.

• 

It does not exit the PUBLIC mode.

• 

If “EXCUTE” is not executed, the content that does RESET is not refl ected.

㻤㻚㻌㻼㼡㼎㼘㼕㼏㻌㻹㼛㼐㼑

㻠㻚㻌㻮㼍㼟㼕㼏㻌㼛㼜㼑㼞㼍㼠㼕㼛㼚㻌㼕㼚㻌㼠㼔㼑㻌㻼㼡㼎㼘㼕㼏㻌㻹㼛㼐㼑

㻡㻚㻌㻻㼜㼑㼞㼍㼠㼕㼛㼚㻌㼍㼒㼠㼑㼞㻌䇾㻾㻱㻿㻱㼀䇿

㻼㼡㼎㼘㼕㼏㻌㻹㼛㼐㼑㻌㼟㼑㼠㼠㼕㼚㼓㻌㼟㼏㼞㼑㼑㼚㻚

㼂㼛㼘㻌㻔㻗㻛㻙㻕㻌㼛㼞㻌㻯㼡㼞㼟㼛㼞㻌㻔㻌䚷䚷䚷䚷㻌㻕

㻼㻌㻔㻗㻛㻙㻕㼛㼞㻌㻯㼡㼞㼟㼛㼞㻌㻔䕦㻛䕰㻕

㻰㼑㼏㼕㼟㼕㼛㼚㻌㻔㼛㼗㻕

㻯㼔㼍㼚㼓㼑㻌㼛㼞㻌㼑㼤㼑㼏㼡㼠㼕㼛㼚㻌㼛㼒㻌㼠㼔㼑㻌㼟㼑㼠㻌㼢㼍㼘㼡㼑㻚
㻹㼛㼢㼑㼙㼑㼚㼠㻌㼠㼛㻌㼠㼔㼑㻌㼟㼑㼘㼑㼏㼠㼑㼐㻌㼕㼠㼑㼙㻚
㻱㼤㼑㼏㼡㼠㼕㼛㼚㻌㻔㼁㼟㼑㼐㻌㼎㼥㻌㼠㼔㼑㻌㼕㼠㼑㼙㼟㻌䇾㻱㼤㼑㼏㼡㼠㼕㼛㼚䇿㻌㼍㼚㼐㻌䇾㻾㻱㻿㻱㼀䇿㻚㻕

㻛

㻼㼡㼎㼘㼕㼏㻌㻹㼛㼐㼑

㻼㻻㼃㻱㻾㻌㻻㻺㻌㻲㻵㼄㻱㻰㻌

㼇㼂㻭㻾㻵㻭㻮㻸㻱㼉

㻿㻴㼁㼀㻌㻰㻻㼃㻺㻌㻹㻻㻰㻱㻌

㼇㻺㻻㻾㻹㻭㻸㼉

㻹㻭㼄㻵㻹㼁㻹㻌㼂㻻㻸㼁㻹㻱㻌

㼇㻢㻜㼉

㼂㻻㻸㼁㻹㻱㻌㻲㻵㼄㻱㻰㻌

㼇㼂㻭㻾㻵㻭㻮㻸㻱㼉

㼂㻻㻸㼁㻹㻱㻌㻲㻵㼄㻱㻰㻌㻸㻱㼂㻱㻸㻌

㼇㻞㻜㼉

㻾㻯㻌㻮㼁㼀㼀㻻㻺㻌

㼇㻾㻱㻿㻼㻻㻺㻰㼉

㻼㻭㻺㻱㻸㻌㻮㼁㼀㼀㻻㻺㻌

㼇㻾㻱㻿㻼㻻㻺㻰㼉

㻹㻱㻺㼁㻌㻮㼁㼀㼀㻻㻺㻌

㼇㻾㻱㻿㻼㻻㻺㻰㼉

㻭㼂㻌㻼㻻㻿㻵㼀㻵㻻㻺㻌㻲㻵㼄㻱㻰㻌

㼇㼂㻭㻾㻵㻭㻮㻸㻱㼉

㻻㻺㻌㻿㻯㻾㻱㻱㻺㻌㻰㻵㻿㻼㻸㻭㼅㻌

㼇㼅㻱㻿㼉

㻵㻺㻼㼁㼀㻌㻹㻻㻰㻱㻌㻿㼀㻭㻾㼀㻌

㼇㻺㻻㻾㻹㻭㻸㼉

㻵㻺㻼㼁㼀㻌㻹㻻㻰㻱㻌㻲㻵㼄㻱㻰㻌

㼇㼂㻭㻾㻵㻭㻮㻸㻱㼉

㻸㻻㼁㻰㻌㻿㻼㻱㻭㻷㻱㻾㻌

㼇㻻㻺㼉

㻾㻯㻌㻼㻭㼀㻴㻌㼀㻴㻾㻻㼁㻳㻴㻌

㼇㻻㻲㻲㼉

㻞㻟㻞㻯㻌㻼㻻㼃㻻㻺㻌

㼇㻰㻵㻿㻭㻮㻸㻱㼉

㻼㼁㻮㻸㻵㻯㻌㻹㻻㻰㻱㻌

㼇㻻㻺㼉

㻾㻱㻿㻱㼀
㻱㼄㻱㻯㼁㼀㻱

8.6. Setting items (’Items names and selective items are expressed in English)

1) Power ON fixed [POWER ON FIXED]

Option 

“VARIABLE”,“FIXED_ALL”,“FIXED_BODYKEY”or“RCRESPOND” (loop enabled)

Default “VARIABLE”
Function 

䞉 VARIABLE 

䠖“POWER/RECEPTION” key on TV unit or remote control is enabled

䞉 FIXED_ALL

䠖“POWER/RECEPTION” key on TV unit or remote control is disabled. 

䞉 FIXED_BODYKE 䠖Only the “MAIN POWER” key on TV unit is disabled

 (The remote control is enabled).

䞉 RC RESPOND

䠖The main unit’s POWER switch toggles between ON and Standby
 (the same operation by the remote control).

Key disabled when set

䞉 OFF TIMER (SLEEP) (䈜Only when setting to FIXED_ALL )

other than default
Remarks 

䞉

When selecting to “FIXED_ALL”, function related standby  factors(see below) doesn't work. and not selecting

  OFF TIMER(Sleep)
  No operation OFF
  No signal OFF (including the power management)
䈜 These items does not exist according to the model.

If the power button is pressed in the ordinary mode in setting to “FIXED_ALL” and “FIXED_BODYKEY”, 
the caution is displayed for 5 seconds.

When power button on the main unit is pressed

When power button on R/C is pressed

*  The OSD display is an example.

If another ODS is previously displayed, the status is reset (MENU or similar).

2)  Instantaneous current shutdown setting in turning off the power [SHUT DOWN MODE]

Option

“NORMAL”or“QUICK”

Default

NORMAL

Function

䞉 This function decides whether scanning  digital tuner is enabled or disabled 

when the power is standby.
NORMAL  

䠖Scanning  digital tuner is  enabled when the power is standby.

QUICK

䠖Scanning  digital tuner is disable 
䚷It is possible to put into the standby state instantaneously due to power off input, 
䚷when the power is standby.
䚷Immediately, state is a complete standby. 

Remarks

In selecting “QUICK”, the function does not work for the following items
(selection impossible.)

䞉 ON TIMER, QUICK START, DIGITAL FIXED, etc.

䈜 These items does not exist according to the model.

3)  Volume maximum level [MAXIMUM VOLUME]

Option

0~60 (loop disabled)

Default

Function

The volume cannot be increased more than the adjusted value (the main unit’s speaker only).

Remarks

䞉 When setting to 59 or less, only the figure is displayed in the normal mode; 

the volume bar is not displayed.

䞉 The volume of the headphones

 

is limited. 

䞉 The setting is impossible when VOLUME FIXED is set to FIXED.

㻺㼛㻌㻼㼛㼣㼑㼞㻌㼛㼒㼒㻌㼎㼥㻌㼜㼛㼣㼑㼞㻌㼎㼡㼠㼠㼛㼚㻚

㻺㼛㻌㻼㼛㼣㼑㼞㻌㼛㼒㼒㻌㼎㼥㻌㼞㼑㼙㼛㼠㼑㻌㼏㼛㼚㼠㼞㼛㼘㻚

4) Volume fixed [VOLUME FIXED]

Option “VARIABLE”,“FIXED”,“ACCTRL”or“AC/RCCTRL”(loop 

enabled)

Default “VARIABLE”
Function 

䞉

VARIABLE

䠖

The volume is not fixed.

䞉

FIXED

䠖

The volume is fixed to the value adjusted in the volume fixed level.

䞉

AC CTRL

䠖

The unit starts at the volume specified in the volume fixed level, 

䚷

 when power is turned on in the case of the AC-ON only.

䞉

AC/RC CTRL

䠖

The unit starts at the volume specified in the volume fixed level, 

䚷

when power is turned on in any case.

  (AC->ON, remote control->ON, main utit's key->ON)

Exception 

䞉

In the adjustment process, the volume can be set to any level regardless of this setting.

Disabled key 

䞉

VOLUME UP/DOWN    [both remote control and main unit]

when setting to FIXED 䞉 MUTE    

䈜

Main units's key is enabled for operating menu.

Remarks 

䞉

[MAXIMUM VOLUME] has priority to 䠷VOLUME FIXED䠹
 䈜When setting to FIXED, Maximum volume is fixed.

䞉

The volume of the headphones is fixed. 

or monitor output 

䞉 When setting to “FIXED”, the volume is not displayed in operating Disabled key 

䞉 In menu operation, the main unit’s keys (Vol(+/-)) are enabled.

䞉

Volume level graphic be omitted to volume level number.

䞉

In setting to FIXED, ONVOL of On TIMER is not selected (Eliminate Item)

䞉

In setting to AC/RC CTRL, ONVOL of On TIMER i is not selected (Eliminate Item)

5)  Volume fixed level [VOLUME FIXED LEVEL]

Option 0~60(loop 

disabled)

Default 20
Function 

The volume is fixed to the adjusted value (the main unit’s speaker only).

Exception

䞉

In the adjustment process, the volume can be set to any level regardless of this setting.

Remarks

䞉

When [VOLUME FIXED] is set to “VARIABLE”, the setting cannot be changed.

䞉

VOLUME can be abbreviated to VOL.

6) Remote control operation [RC BUTTON]

Option “RESPOND”,“NORESPOND”or“LIMITED”(loop 

enabled)

Default “RESPOND”
Function 

The operation of the remote control’s keys is set.

RESPOND

䠖

The remote control’s keys in the normal state are enabled.

NO RESPOND

䠖

The remote control’s keys in the normal state are disabled.

  The POWER key (RECEPTION/STANDBY key) is also disabled.

LIMITED 

䠖

only a part of keys (CHANNEL, etc.) is enabled and other keys are disabled.

Exception

䞉

All the keys are enabled regardless of this setting while entering the adjustment process mode, 
inspection mode or Public Mode setting screen.

Remarks 

The enable keys when setting to “LIMITED” are depended on Model.

7) Main Unit Operation [PANEL BUTTON]

Option

“RESPOND”or“NO RESPOND”(loop enabled)

Default “RESPOND”
Function 

䞉

RESPOND 

䠖

The main unit’s keys are enabled.

䞉

NO RESPOND  䠖The main unit’s keys are disabled excluding the POWER key 

䚷䚷

(RECEPTION/STANDBY key).

Exception 

䞉

The start operation in the adjustment process mode, inspection mode

or Public mode 

are enabled regardless of this setting.

䞉

All the keys are enabled regardless of this setting while entering the adjustment process mode, 
inspection mode or Public Mode setting screen.

䞉

during the initial setting when the power is turned on for the first time.

8) Menu operation [MENU BUTTON]

Option 

“RESPOND”or“NO RESPOND”(loop enabled)

Default “RESPOND”
Function 

The MENU key on the main unit and remote control is decided whether it is enabled or disabled.

Exception 

䞉

RESPOND 

䠖

The manu key is enabled.

䞉

NO RESPOND  䠖The manu key is disabled.

䠖

All the keys are enabled regardless of this setting while entering the process mode,

  inspection mode or Public Mode setting screen.

Disabled key excluding

All the direct transition keys to menu display (AUTO PRESET, MANUAL MEMORY and others)

Menu key

䈜

 These keys does not exist according to the model.

when setting to not default

Remarks 

When setting to “NO RESPOND”
䞉

For the models with the MENU key on the main unit, menu operation is possible 
regardless of the setting while the initial setting when the power is turned on for the first time

For the models with the MENU key on the main unit, menu operation is possible regardless of the setting

9) AV position fixed [AV POSITION FIXED]

Option “VARIABLE”or“FIXED”(loop 

enabled)

Default “VARIABLE”
Function

䞉 VARIABLE

䠖AV position is not fixed.

䞉 FIXED

䠖AV position is  fixed.
䠖The image/sound adjustment items in the menu are fixed in the selected state.

䚷and setting is not changed.

Remarks 

䞉 When receiving the sound select direct keys (AV POSITION key, OPC, DOLBY key, etc.), 

only the actual state  is displayed; no setting is changed.
䈜 These keys does not exist according to the model.

䞉 The settings for the Public mode are retained after the personal data is initialized, 

each item for  the AV position and image/sound adjustment are not initialized.

10) OSD display [ON SCREEN DISPLAY]
Option 

“YES”,“NO”or “LIMITED”(loop enabled)
“LIMITED” is looped only in case of need (destination).

Default “YES”
Function 

䞉 YES

䠖OSD is displayed 

䞉 NO

䠖the following OSD is not displayed.
䚷Registration, setting, adjustment menu, channel call, volume bar, and input select

䞉 LIMITED

䠖only a part of OSD (CH call : "New Information" etc...) is not displayed.

Key which may be

䞉 It is OK in the case that simple input select occure or the original state returns soon automatically.

enabled 

(Example of theconfusing key)

Disabled key

䞉 When setting to “NO”,  the keys which is related to visibility of the screen and sound cannot be used.

when setting to not default

STILL IMAGE, SCREEN DISPLAY, OFF TIMER, AV POSITION, BRIGHTNESS SENSOR, 
SCREEN SIZE SELECT, AUTO PRESET, MANUAL MEMORY, IMAGE SELECT, SOUND SELECT, 
LANGUAGE, Closed caution

䈜 Disabled keys dependeds on the models. 

Remarks

䞉 When seting to “NO”,

ON TIMER(Watching reservation) is cleared.
OFF TIMER “SLEEP” is cleared.

䈜 These items does not exist according to the model.

䞉 When seting to “NO”,

the adjustment process mode , K mark of inspection mode)
are enabled regardless of this setting.

11) Start mode [INPUT MODE START]
Option 

“NORMAL” or “Input source 1 (input selection or channel)” • • • (loop enabled)

Default “NORMAL”
Function wh䡅ch kinds of input source or channel is decided when the power turning on.

NORMAL 

䠖the content of the last memory is followed.

Remarks

䞉 When seeting to not Normal,

ON TIMER(Watching reservation) has priority.

䞉 When setting  to “NORMAL”, [INPUT MODE FIXED] is set to “VARIABLE” . 

and [INPUT MODE FIXED] is prohibited to select.(selection impossible.)

Example of option: “NORMAL”
“TVD(002TV)”, “INPUT1”, “INPUT2”, “INPUT3”, , “HDMI1”, “HDMI2”, “HDMI3”, “HDMI4”.

12) Input fixed [INPUT MODE FIXED]
Option

“VARIABLE”“FIXED”,“ACCTRL”or“AC/RCCTRL”(loop enabled)

Default VARIABLE
Function VARIABLE

䠖If [INPUT MODE START] is set to Normal, input mode is not fixed.

FIXED

䠖when “INPUT MODESTART” is active, 
䚷it is impossible to switch to another channel or input source.

AC CTRL

䠖when “INPUT MODESTART” is active
䚷the unit starts at the input mode which is selected 
  when power is turned on in the case of the AC-ON only.

AC/RC CTRL

䠖when “INPUT MODESTART” is active

  (AC->ON, remote control->ON, main utit's key->ON)

Disabled key when setting

CHANNEL (+/- )  , DIRECT CHANNEL buttons, FLASHBACK, INPUT SELECT, 

to “FIXED” 

Remarks 

䞉 If [INPUT MODE START] is Normal , this function cannot be set.

Set to “VARIABLE” automatically.

䞉 When setting  to “FIXED”,

 The item related to the channel setting and input selection in Menu are not displayed.
 ON TIMER(Watching reservation) is not active.
䈜 These items does not exist according to the model.

TV/VIDEO, AUTO PRESET, MANUAL MEMORY,i.LINK,DIRECTINPUTSELECT,ATV,DTV,EPG,RADIO etc

䠖When receiving “AV POSITION” of the remote control, only the actual state is displaye

These Displays (Version-up䠈Public mode setting screen䠈Pass Word input screen of Public 

䚷the unit starts at the input mode which is selected when power is turned on in any