DOWNLOAD Sharp LC-70UD20KN (serv.man4) Service Manual ↓ Size: 3.86 MB | Pages: 94 in PDF or view online for FREE

6 Software update starts.

Please wait for a while until the bar shows 100%

• 

Do not take out the USB memory device during updating.

7 When all the procedures are complete, the following upgrade success screen shows up.

The new software version can be confi rmed on screen.

After a while, Turn off power and boot-up automaticaly.

Note
•  TV is restarted automaticaly, the AC code need not be pulled out.

8 After boot-up, the following caution shows up.

Select “OK” when if there is no problem.

Software update is completed, please remove the USB memory device.

•  Then get the set started and call the process adjustment screen (Top Page) to check the main software version.

•  The Net TV memory, which includes the lock code, passwords, and cookies, may be cleared when the software 

update is carried out.

1) Do not take out and put in the USB fl ash memory during upgrading.

2) Do not turn off the AC power during upgrading.

3) It takes about one minute to the rewriting completion.

Please confi rm the upgrade status on the screen becomes 100%.

4) The AC power supply of the set is waited for about 20 seconds until off

(The AC outlet is pulled out) after the upgrade is completed.

Current version

Update version

Yes

No

䠰䠲

Software update file is detected

in the USB memory device

start update ?

䠰䠲

 [Information 䡡䡡䡡 Software update 䡡䡡䡡 USB update]

Update version

75%

䠰

䠰䠲

 [Information 䡡䡡䡡 Software update 䡡䡡䡡 USB update]

Now updating

 

Remote control operation is disabled during update process.

 

     Do not unplug AC cord.

䠰䠲

1

Update version

䠰䠲

 

Software Update is complete.

䠰䠲

 [Information 䡡䡡䡡 Software update 䡡䡡䡡 USB update]

OK

䠰䠲

䠰䠲

System software was 
successfully updated.

Remove the USB memory device.

Update version

EXXXXXXX-2

1. Failure diagnosis by LED in front of cabinet

2. LED fl ashing specifi cation at the time of the error

Display method
• 

Refer to Table 1.

• 

LED that can be used are only one of the central icon(Emblem Unit). 

This expresses the error situation by combining blinking at low speed and blinking at high speed.

• 

For this model, the blinking pattern displayed fi rst is only a low-speed blinking. 

This expresses a rough content of the error. 

• 

For this model, details are displayed by a high-speed blinking by pushing remote control MENU key.

This expresses details of the error. Details are distinguished by the blinking frequency. 

• 

It doesn’t return to the outline display again (blink at low speed) by pushing the MENU key 

(The toggle is not done). 
Please confi rm “MONITOR ERR CAUSE” of the the adjustment Process mode (1page) ,when the error doesn’t 

reproduce by having returned from the error. 

• 

The process of the upgrade is expressed by the brightness of point LED that smoothness changes. 

• 

The upgrade completion is expressed by the LED brightness that changes in a staircase pattern.

START

Is

theCenterIconlighting

Is

theBacklightlighting?

Check

"[2]

LEDflashingspecificationatthetimeofanerror"

"[3]

TROUBLESHOOTINGTABLE4.Power/BackLight"

Check

PowerͲUnitandACͲcable

Check

"[3]

TROUBLESHOOTINGTABLE1.LCDPanel"

Is

theCenterIconflashing?

Yes

Yes

Yes

No

No

No

Check

"[3]

TROUBLESHOOTINGTABLE2.Sound"

"[3]

TROUBLESHOOTINGTABLE3.Picture"



2: It depends on the system. The power supply error suitable for the product is defi ned. 



3: For details, refer to ERROR STANDBY CAUSE on the adjustment process screen.



4: If the boot section is abnormal, there is no fl ashing (fl ashing disabled).

䠘

䠘Examination for a rough content of the error䠚㻌

Central icon

By pushing remote control MENU key.

䠘Examination for details of the error䠚㻌

Central icon

Central icon

Central icon

㻠㻜㻜㼙㼟

㻝㻢㻜㻜㼙㼟

㻠㻜㻜㼙㼟

㻟㻜㻜㼙㼟

㻝㻢㻜㻜㼙㼟

㻝㻜㻜㼙㼟

㻡㻜㻜㼙㼟

㻡㻜㻜㼙㼟

㻝㻜㻜㻜㼙㼟

㻠㻜㻜㼙㼟

㻠㻜㻜㼙㼟

㻝㻢㻜㻜㼙㼟

㻝㻜㻜㻜㼙㼟

㻝㻜㻜㻜㼙㼟

㻝㻜㻜㻜㼙㼟

㻻㻲㻲

㻻㻺

㻻㻲㻲

㻻㻺

㻻㻲㻲

㻻㻺

㻻㻲㻲

㻻㻺

䠘

䠚㻌

䠘

䠚㻌

Lamp system failure  Flashes once 

-

Flashes once 

Lamp error
Reserve
Reserve
Reserve
Reserve

Power PWB failure Flashes twice 

-

Flashes twice 

Power Error 1 AC_DET error(䈜2) 

(Power failure, etc.)

Power Error 2 UR+13.5V error(䈜2) 
Power Error 3  D3.3V error(䈜2) 
Not used 

Power Error 4  (䈜2) 

Panel power supply error

Main PWB failure 

Flashes 3 times 

-

Flashes 3 times 

Initial communication error

(Communication failure, etc.) 

Start-up confirmation communication error
Regular communication error
Reserve
Other communication error

Others 

Flashes 4 times 

-

Flashes 4 times 

Temperature error
Sync error
Notification from the main microprocessor(䈜3)
Reserve
Reserve

Upgrade executing 

Version upgrading

Upgrade completion

Version upgrade succeeded

Upgrade failed 

Version upgrade failed

System 

ROM data failure 

Start-up after failing version upgrade(䈜4)

Item

Expression for a rough content

Expression for Details

Cause

low-speed blinking high-speed blinking low-speed blinking high-speed blinking

Flashes once 
Flashes twice 
Flashes 3 times 
Flashes 4 times 
Flashes 5 times 
Flashes once 
Flashes twice 
Flashes 3 times 
Flashes 4 times 
Flashes 5 times 
Flashes once 
Flashes twice 
Flashes 3 times 
Flashes 4 times 
Flashes 5 times 
Flashes once 
Flashes twice 
Flashes 3 times 
Flashes 4 times 
Flashes 5 times 

Smoothness changes

-

-

-

a staircase pattern. 

-

-

-

-

Flashing(Continuous)

-

-

Not used 

Mounting discrimination connector 

-

Flashing(Continuous)

-

-

Flashes 5 times 

-

-

Location: Page (1) of the adjustment process mode: NORMAL STANDBY CAUSE
  Outline: When TV set is powered off due to normal use or product specifi cation, the last cause will be recorded.

The code, character string and description for the standby cause are below.
If you power off by remote, the cause will not be recorded.

Location: Page (1) of the adjustment process mode: NORMAL STANDBY CAUSE
  Outline: When TV set is powered off due to any anomaly detection, the past 5 causes will be recorded.

You can confi rm the time those causes occurred and character string in the adjustment process mode menu. 

The time is accumulated total after TV set is powered on, and the value corresponds to “Center Acutime” 

on the page(2) of the adjustment process mode menu.

The code, character string and description for the standby cause are below.
If no error has occurred, the code is 0 and the character string is “NO RECORD”.

Location: Page (1) of the adjustment process mode: MONITOR ERR CAUSE
  Outline: Communication/Power failure detected by the monitor microprocessor (IC2002) is stored on EEPROM,

 states can be confi rmed in the adjustment process mode.

“0” if there is no error. 

 Note: It is cleared to 0 on the page(2) of the adjustment process mode.

䠍䠅

䠎䠅

䠄

䠇

䠅

Display

character string

Description

2

NO_OPERT

No operation off

3

NO_SIGNA

No signal off

6

SLEEP_TM

Off timer

8

OFF_232C

Command from RS232C

䠍䠅

䠎䠅

䠄

䠇

䠅

Display

character string

Description

1A

E_MONITR

Monitor trouble detected

1C

E_CVICBT

cvic boot error

22

E_TCNERR

Software abnormality of LED controller

48

E_MRESET

Failure of resetting menu settings(Initial Setup - Reset)

50

E_TCNF_S

T-CON FPGA status error

54

E_TCON_E

T-CON hung-up

58

E_FRC_ST

FRC setting error

䠍䠅

䠎䠅

䠄

䠇

䠅

Display 

02

Start-up communication error 2 

Initial communication from the main CPU is not received.

03

Start-up communication error 3 

Only the initial communication is received.

04

Start-up communication error 4

Until panel information request reception

05

Start-up communication error 5

Until initialization completion reception

06

Start-up communication error 6

Until version notification transmission

07

Start-up communication error 7

Until start-up information notification transmission

08

Start-up communication error 8

Until start-up information response reception

09

Start-up communication error 9

Until time-out setting reception

0A

Communication error A 

REQ time-out

0B

Communication error B 

Restart time-out during the beginning of time acquisition start-up

0C

Communication error C 

Ending sequence time-out

0D

Communication error D 

Preset start-up time-out during completion

0E

Communication error E 

Download start-up time-out

0F

Communication error F 

Time acquisition time-out

11

 Communication error H

Regular communication time-out

16

Panel-related error 

Lamp failure

1A

Other error 2 

Monitor temperature failure

1D

Power supply error 1 

PS_ON(AC_DET) failure

1E

Power supply error 2 

D_POW(DET_13V) failure

1F

Power supply error 3 

D_POW(DET_D3V3) failure

21

Power supply error 5 

Panel Power Error

23

Other error 3 

Error standby request from the main CPU

Error description