Sharp LC-60LE925E (serv.man22) User Manual / Operation Manual ▷ View online
31
Picture
Advanced
This TV provides various advanced functions for
optimising the picture quality.
optimising the picture quality.
Go to “Menu” > “Setup” > “Picture” >
“Advanced”.
“Advanced”.
C.M.S.-hue
This function adjusts the hue of a selected colour using a
six-colour adjustment system.
six-colour adjustment system.
C.M.S.-saturation
This function increases or decreases the saturation of a
selected colour using a six-colour adjustment system.
selected colour using a six-colour adjustment system.
C.M.S.-value
This function adjusts the brightness of a selected colour
using a six-colour adjustment system.
using a six-colour adjustment system.
Colour temp.
Adjusts the colour temperature to give the best white
image.
image.
Item
High
White with bluish tone.
Mid-High
Intermediate tone between “High” and
“Middle”.
“Middle”.
Middle
Natural tone.
Mid-Low
Intermediate tone between “Middle”
and “Low”.
and “Low”.
Low
White with reddish tone.
R/G/B Gain (LO),
R/G/B Gain (HI)
R/G/B Gain (HI)
Adjusts the white balance by changing
the value of each item.
the value of each item.
Scanning Backlight 200
“Scanning Backlight 200” technologies provide superior
solutions for digital display picture quality removing
motion blur (“Scan”, “High”, “Low”, “Off”).
solutions for digital display picture quality removing
motion blur (“Scan”, “High”, “Low”, “Off”).
NOTE
• This effect is greater on fast moving images.
• These functions will have no effect in the following cases.
• These functions will have no effect in the following cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
2) An OSD is being displayed.
3) Teletext is activated.
• If images appear blurred, set to “Off”.
Quad pixel plus
Reproduces high-definition images with higher resolution.
Gamma adjustment
Selects the tone difference of the brightness and
darkness of the image according to the type of
programme watched from a maximum of
darkness of the image according to the type of
programme watched from a maximum of
e 2 to a
minimum of
f 2.
Film mode
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending on
the vertical frequency), analyses it and then recreates
each still film frame for high-definition picture quality
(“Advanced (High)”, “Advanced (Low)”, “Standard”, “Off”).
encoded at 24 or 25 frames per second, depending on
the vertical frequency), analyses it and then recreates
each still film frame for high-definition picture quality
(“Advanced (High)”, “Advanced (Low)”, “Standard”, “Off”).
NOTE
• You can select “Advanced”, “Standard” and “Off” in 3D mode.
Active contrast
Automatically adjusts the contrast of an image according
to the scene.
to the scene.
DNR
“DNR” produces a clearer image (“Auto”, “High”,
“Middle”, “Low”, “Off”).
“Middle”, “Low”, “Off”).
NOTE
• This function may not be available depending on the input
signal type.
Monochrome
For viewing a video in black & white.
Range of OPC
The brightness level range of the OPC sensor’s automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of
e 16 and a minimum of f 16.
NOTE
• This function is available only when the “OPC” setting is set to
“On” or “On:Display”.
• The maximum setting cannot be set to a smaller number than
the minimum setting.
• The minimum setting cannot be set to a bigger number than
the maximum setting.
• The maximum and minimum settings cannot be set to the
same number.
• Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
Basic adjustment
LC-60LE925E_GB_ver4.indd 31
LC-60LE925E_GB_ver4.indd 31
2010/08/17 16:42:39
2010/08/17 16:42:39
32
Audio settings
Go to “Menu” > “Setup” > “Audio”.
Setup
Bass
Auto volume
Audio
Treble
[Off]
STANDARD
CH list
:Back
:Enter
Menu
Balance
L30
R30
Audio
Auto volume
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. This function reduces this problem
by equalizing levels.
same volume level, such as a programme and its
commercial breaks. This function reduces this problem
by equalizing levels.
Item
High
Strongly reduces the volume gaps
among different sound sources.
among different sound sources.
Middle
Low
Slightly reduces the volume gaps among
different sound sources.
different sound sources.
Off
Does not adjust the volume gaps.
Audio
Audio adjustment
You can adjust the sound quality to your preference with
the following settings.
the following settings.
Item
c (Cursor)
d (Cursor)
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decrease audio from
the right speaker
the right speaker
Decrease audio from
the left speaker
the left speaker
Audio
Surround
This function produces a surround effect from the
speakers.
speakers.
Item
3D Hall
Reproduces a concert hall experience
with realistic live surround sound based on
reverberant sounds measured in a concert
hall.
with realistic live surround sound based on
reverberant sounds measured in a concert
hall.
3D Movie
Reproduces a movie theater experience
with realistic live surround sound based on
reverberant sounds measured in a movie
theater.
with realistic live surround sound based on
reverberant sounds measured in a movie
theater.
3D Standard
Creates three-dimensional surround sound
with detailed control of the signal phase.
with detailed control of the signal phase.
Normal
Provides limited surround sound.
Off
Outputs normal sound.
Audio
Bass enhancer
This function allows you to enjoy bass-enhanced sound.
Basic adjustment
LC-60LE925E_GB_ver4.indd 32
LC-60LE925E_GB_ver4.indd 32
2010/08/17 16:42:40
2010/08/17 16:42:40
33
Audio
Clear voice
This function emphasises speech against background
noise for greater clarity.
noise for greater clarity.
Audio
Audio description setting
This function allows you to enable output of audio
description if the TV receives a signal including audio
description.
description if the TV receives a signal including audio
description.
NOTE
• When the “Audio description” is set to “On”, the audio
description sound is superimposed on the main audio when
you select a broadcast compatible with audio description.
you select a broadcast compatible with audio description.
• If you do not clearly hear the sound for the visually impaired, go
to “Menu” > “Setup” > “Audio” > “Audio description setting” >
“Mix level”, and select the upper level to turn up the volume.
“Mix level”, and select the upper level to turn up the volume.
• This function is available only for DTV broadcasts. This “Audio
description setting” menu is not displayed for the ATV or the
external inputs.
external inputs.
• The audio description sound is superimposed on the main
audio only when the sound is output on the speaker sound
output, headphone sound output and sound for audio out
output. The sound is not output on the S/PDIF sound output
and the SCART sound output.
output, headphone sound output and sound for audio out
output. The sound is not output on the S/PDIF sound output
and the SCART sound output.
• This function is not available for the AQUOS Audio speaker
system.
• This function does not work during time shift playback.
Setting audio input
Option
Audio select
When using the EXT 3 terminal or HDMI 2 terminal, you
must select which terminal uses the AUDIO (R/L) jack for
analogue audio input.
must select which terminal uses the AUDIO (R/L) jack for
analogue audio input.
Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “Audio select”.
“Terminal setting” > “Audio select”.
When selecting “HDMI 2” from the “INPUT” menu
Item
HDMI (Digital)
When connecting devices (including
a PC) with HDMI cable to the HDMI 2
terminal.
a PC) with HDMI cable to the HDMI 2
terminal.
HDMI+Analog
When connecting devices (including a
PC) with DVI/HDMI cable to the HDMI
2 terminal and inputting analogue audio
signals from the AUDIO (R/L) jack.
PC) with DVI/HDMI cable to the HDMI
2 terminal and inputting analogue audio
signals from the AUDIO (R/L) jack.
NOTE
• You must set this to “HDMI+Analog” when connecting devices
(including a PC) with an HDMI-certified cable to the HDMI 2
terminal. If “HDMI (Digital)” is set, there will be no sound output.
terminal. If “HDMI (Digital)” is set, there will be no sound output.
When selecting “EXT 3” from the “INPUT” menu
Item
Video
When connecting devices with AV cable
to the EXT 3 terminal, display images
without audio.
to the EXT 3 terminal, display images
without audio.
Video+audio
When connecting a PC to the EXT 3
terminal, and inputting analogue audio
signals from the AUDIO (R/L) jack.
terminal, and inputting analogue audio
signals from the AUDIO (R/L) jack.
NOTE
• You must also set “COMPONENT” from the “Input select” menu
when selecting “EXT 3” from the “INPUT” menu (Pages 19 and 45).
Basic adjustment
LC-60LE925E_GB_ver4.indd 33
LC-60LE925E_GB_ver4.indd 33
2010/08/17 16:42:42
2010/08/17 16:42:42
34
Power save settings
Go to “Menu” > “Setup” > “ECO”.
Setup
No signal off
ECO picture control
ECO
Energy save
CH list
:Back
:Enter
Menu
No operation off
[Disable]
[Disable]
[Off]
[On]
ECO
ECO picture control
This function automatically detects the image source and
decreases the power consumption while keeping the
brightness of the image unchanged.
decreases the power consumption while keeping the
brightness of the image unchanged.
NOTE
• This function does not work when “AV mode” is set to
“DYNAMIC (Fixed)” or “AUTO”.
• This function does not work when “Energy save” is set to
“Standard” or “Advanced”.
• This function is greyed out in 3D mode.
ECO
Energy save
This function enables you to reduce the backlight
brightness in order to decrease the power consumption
and increase the backlight life span as shown in the
following table.
brightness in order to decrease the power consumption
and increase the backlight life span as shown in the
following table.
Item
Standard
Reduces the backlight brightness.
Advanced
Reduces the backlight brightness more
than “Standard”.
than “Standard”.
Off
The backlight brightness is the same
value of your settings in the selected
“AV mode”.
value of your settings in the selected
“AV mode”.
NOTE
• This function does not work when “AV mode” is set to
“DYNAMIC (Fixed)”.
• This function does not work when “3D brightness boost” is set
to “High” or “Low”.
E
“Energy save” status icons
Icon
Description
“Energy save” is set to “Standard”.
“Energy save” is set to “Advanced”.
When “Energy save” is set to “Standard” or “Advanced”,
“Energy save” status icons appear in the “Picture” menu
and channel information windows.
“Energy save” status icons appear in the “Picture” menu
and channel information windows.
ECO
No signal off
When set to “Enable”, the TV will automatically enter
standby mode if there is no signal input for 15 minutes.
standby mode if there is no signal input for 15 minutes.
NOTE
• Even if a TV programme finishes, this function may not operate
because of interference from other TV stations or other signals.
ECO
No operation off
The TV will automatically enter standby mode if no
operations are performed in three hours if “Enable” is
selected.
operations are performed in three hours if “Enable” is
selected.
NOTE
• Five minutes before the TV enters standby mode, the remaining
time displays every minute.
ECO
Sleep timer
Allows you to set a time when the TV automatically enters
standby mode. You can set the time span for entering
standby mode after selecting “Change”.
standby mode. You can set the time span for entering
standby mode after selecting “Change”.
NOTE
• Select “Off” to cancel the sleep timer.
• When the time has been set, countdown automatically starts.
• Five minutes before the preset of time expires, the remaining
• When the time has been set, countdown automatically starts.
• Five minutes before the preset of time expires, the remaining
time displays each minute.
ECO
Audio only
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
can set the TV off and enjoy audio only.
Item
On
Audio is output without a screen image.
Off
Both screen images and audio are
output.
output.
Basic adjustment
LC-60LE925E_GB_ver4.indd 34
LC-60LE925E_GB_ver4.indd 34
2010/08/17 16:42:43
2010/08/17 16:42:43
Click on the first or last page to see other LC-60LE925E (serv.man22) service manuals if exist.