Sharp LC-60LE925E (serv.man22) User Manual / Operation Manual ▷ View online
43
Selecting the recording picture
size manually
size manually
Option
REC picture size
You can use this menu to set the appropriate picture size
for viewing a 16:9 format TV programme on a 4:3 TV.
for viewing a 16:9 format TV programme on a 4:3 TV.
Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “REC picture size”.
“Terminal setting” > “REC picture size”.
Setting to “4:3 TV”
Setting to “16:9 TV”
NOTE
• This function must be set before recording.
Selecting the HDMI picture size
automatically
automatically
Option
HDMI auto view
This function allows you to automatically change to the
appropriate picture size when viewing an HDMI signal
using the HDMI 1, 2, 3 and 4 terminals.
appropriate picture size when viewing an HDMI signal
using the HDMI 1, 2, 3 and 4 terminals.
1
Press b to select the input source (“HDMI
1”, “HDMI 2”, “HDMI 3” or “HDMI 4”)
connected to your HDMI device, and then
press
1”, “HDMI 2”, “HDMI 3” or “HDMI 4”)
connected to your HDMI device, and then
press
;.
2
Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “HDMI auto view”.
“Terminal setting” > “HDMI auto view”.
Adjusting image position
Option
Position
For adjusting a picture’s horizontal and vertical position.
Go to “Menu” > “Setup” > “Option” > “Screen
effect” > “Position”.
effect” > “Position”.
Item
H-Pos.
Centres the image by moving it to the
left or right.
left or right.
V-Pos.
Centres the image by moving it up or
down.
down.
NOTE
• Adjustments are stored separately for each input source.
• Depending on the input signal type, “Wide mode” setting or
• Depending on the input signal type, “Wide mode” setting or
“Video mode” for the USB mode, a position setting may not
be available.
be available.
• This function is not available for DTV/SAT broadcasts with
MHEG signals.
• This function is available for 3D images converted from 2D
images or normal 2D images.
Useful viewing functions
LC-60LE925E_GB_ver4.indd 43
LC-60LE925E_GB_ver4.indd 43
2010/08/17 16:42:58
2010/08/17 16:42:58
44
Display settings
Channel display
You can display the channel information by pressing p
on the remote control unit.
on the remote control unit.
DTV mode
ATV mode
Audio (ENG)
STEREO
Video
Subtitle
Subtitle
Off
>> New information
MONO
Auto
Subtitle
SAT mode
Audio (ENG)
STEREO
Video
Subtitle
Subtitle
Off
>> New information
I
Four digit numbers (e.g., 0001) are displayed after selecting the
five Nordic countries in the country setting.
five Nordic countries in the country setting.
J
Satellite channels are displayed by four digit numbers (e.g.,
0001).
0001).
K
You can set four satellite stations to “SAT1”, “SAT2“, “SAT3“,
“SAT4”.
“SAT4”.
E
Time display in channel information
You can display the time information included in DTV, SAT
and teletext broadcasts.
and teletext broadcasts.
NOTE
• Skip step 1 if receiving DTV/SAT broadcasts.
1
Select a TV channel (the time information is
automatically captured).
automatically captured).
2
Press p. The channel display will appear on
the TV.
the TV.
3
Press p again within the several seconds
that the channel display is on the screen. Time
information will be shown in the lower-right
corner of the screen for several seconds.
that the channel display is on the screen. Time
information will be shown in the lower-right
corner of the screen for several seconds.
4
Even when you change the TV channel, you
can display the time information with steps 2
and 3 above.
can display the time information with steps 2
and 3 above.
NOTE
• If acquired successfully, the time information will appear in the
upper-right corner of the screen by pressing @.
Time and title display
View setting
Time display
Go to “Menu” > “Setup” > “View setting” >
“Individual setting” > “Time display”.
“Individual setting” > “Time display”.
Time display
This function allows you to display the clock time in the
lower-right corner of the screen.
lower-right corner of the screen.
Item
On
Displays the clock time.
On (half-hourly)
Displays the clock time in 30-minute
increments.
increments.
Off
Hides the clock time.
Time format
You can select the time format (either “24HR” or “AM/
PM”) for the clock time.
PM”) for the clock time.
Option
Game play time
This function allows you to display the elapsed time on
the screen when “AV mode” is set to “GAME”.
the screen when “AV mode” is set to “GAME”.
Go to “Menu” > “Setup” > “Option” > “Game
play time”.
play time”.
Item
On
Under connecting a game console to
the TV, the elapsed time is displayed
in 30-minute increments after you start
playing a game.
the TV, the elapsed time is displayed
in 30-minute increments after you start
playing a game.
Off
Hides the time.
NOTE
• This menu is not selectable if the input source is “TV” or “USB”.
Option
Programme title display
This function allows you to display programme
information such as the title and airtime by tuning a
channel.
information such as the title and airtime by tuning a
channel.
Go to “Menu” > “Setup” > “Option” > “Screen
effect” > “Programme title display”.
effect” > “Programme title display”.
NOTE
• This function is available only when the DTV/SAT mode is
selected.
Useful viewing functions
LC-60LE925E_GB_ver4.indd 44
LC-60LE925E_GB_ver4.indd 44
2010/08/17 16:43:00
2010/08/17 16:43:00
45
Setting when using external
devices
devices
Input source settings
Option
Input select
For setting the signal type of external equipment.
1
Press b to select the input source for
setting the input signal (“EXT 1” or “EXT 3”)
from the “INPUT” menu, and then press
setting the input signal (“EXT 1” or “EXT 3”)
from the “INPUT” menu, and then press
;.
2
Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “Input select”.
“Terminal setting” > “Input select”.
Item
EXT 1
Y/C, CVBS, RGB
EXT 3
COMPONENT, RGB
NOTE
• If no (colour) image displays, try changing to another
signal type.
• Check the operation manual of the external equipment for the
signal type.
Option
Input label
You can label each input source with a custom
description.
description.
1
Press b to select the desired input source
from the “INPUT” menu, and then press
from the “INPUT” menu, and then press
;.
2
Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “Input label”.
“Terminal setting” > “Input label”.
3
Select each character of the new name for the
input source with using the software keyboard
(Page 7).
input source with using the software keyboard
(Page 7).
NOTE
• The label can be six characters or less.
TV
INPUT
Switchable
CH list
NOTE
• You cannot change labels if the input source is “TV”, “USB”,
Home network or Net TV.
Skipping specified inputs
Option
Input skip
This setting allows you to skip the SCART, HDMI, RGB,
ATV, DTV or SAT input on the input source selection
operation.
ATV, DTV or SAT input on the input source selection
operation.
Go to “Menu” > “Setup” > “Option” > “Input
skip”.
skip”.
Setup
Input skip
Terminal setting
[No]
[No]
[No]
[No]
[No]
[Yes]
NOTE
• When you select “ATV”, “DTV” or “SAT“, the skip function works
only when using the # b button on the front of the TV.
Other useful features
LC-60LE925E_GB_ver4.indd 45
LC-60LE925E_GB_ver4.indd 45
2010/08/17 16:43:02
2010/08/17 16:43:02
46
Additional features
Option
Colour system
You can change the colour system to one that is
compatible with the image on the screen.
compatible with the image on the screen.
Go to “Menu” > “Setup” > “Option” > “Colour
system”.
system”.
NOTE
• The factory preset value is “Auto”.
• If “Auto” is selected, the colour system for each channel is
• If “Auto” is selected, the colour system for each channel is
automatically set. If an image does not display clearly, select
another colour system (e.g., “PAL”, “SECAM”).
another colour system (e.g., “PAL”, “SECAM”).
Option
Headphone/Audio out select
You can select which device is used for outputting audio.
Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “Headphone/Audio out
select”.
“Terminal setting” > “Headphone/Audio out
select”.
Item
Headphone
Output audio through headphones.
Audio out
Output audio through an A/V receiver or
surround audio controller.
surround audio controller.
CAUTION
• This terminal is also used for headphones. Reduce the volume
before using headphones. Overwhelming sound may damage
your hearing.
your hearing.
NOTE
• If you select “Audio out” when a cable is inserted in the HDMI
2/EXT 3 AUDIO (L/R) terminal, the TV speakers are muted.
• When you select “Audio out”, you can adjust the TV sound
volume with the
Yl/k buttons on the TV or i+/-
buttons on the remote control unit.
Option
Channel selecting effect
This function shows a screen effect when choosing or
changing channels.
changing channels.
Go to “Menu” > “Setup” > “Option” > “Screen
effect” > “Channel selecting effect”.
effect” > “Channel selecting effect”.
Option
Illumination
This function makes the LED on the front of TV
illuminated in several ways.
illuminated in several ways.
Go to “Menu” > “Setup” > “Option” >
“Illumination”.
“Illumination”.
Item
Off
The LED is not illuminated.
Standby
The LED is illuminated while the TV is in
standby mode.
standby mode.
Watch
The LED is illuminated while you watch
TV.
TV.
Always
The LED is illuminated all the time.
NOTE
• The factory default for this item is “Watch”. Set to “Off” if you do
not want the LED to illuminate.
• The LED is illuminated in white for 2D mode.
• The LED is illuminated in blue for 3D mode.
• The LED is illuminated in blue for 3D mode.
Option
Demo
Go to “Menu” > “Setup” > “Option” > “Demo”.
NOTE
• To enable this function, you need to set the location of the TV to
“STORE” in the initial auto installation (Page 13).
Other useful features
LC-60LE925E_GB_ver4.indd 46
LC-60LE925E_GB_ver4.indd 46
2010/08/17 16:43:04
2010/08/17 16:43:04
Click on the first or last page to see other LC-60LE925E (serv.man22) service manuals if exist.