DOWNLOAD Sharp LC-60LE925E (serv.man22) Service Manual ↓ Size: 4.34 MB | Pages: 84 in PDF or view online for FREE

To enjoy internet services, you need to connect the TV to 
a router with a high speed connection to the internet. You 
can also connect the TV to your Home network server 
through a router or access point. The TV connection to 
the router can either be wired or wireless.

•  If you choose a wired connection to the router, you need an 

ETHERNET cable (commercially available).

•  If you do not have a broadband internet connection, consult the 

store where you purchased your TV or ask your internet service 
provider or telephone company.

•  An Ethernet and wireless connection cannot be used at the 

same time. Use only one of the connection types.

•  A wireless LAN connection and performance cannot be 

guaranteed for all residential environments. In the following 
cases, the wireless LAN signal may be poor or drop, or the 
connection speed may become slower.
_  When used in buildings made with concrete, reinforced steel, 

or metal

_ When placed near objects that obstruct the signal
_  When used with other wireless devices that emit the same 

frequency

_  When used in the vicinity of microwave ovens and other 

devices that emit a magnetic field, electrostatic charge, or 
electromagnetic interference

•  A stable connection speed is required to play back streaming 

content. Use an Ethernet connection if the wireless LAN speed 
is unstable.

•  Depending on the Home network server, the TV may not be 

able to recognise the contained data.

•  Use only alphanumeric characters for naming files.
•  File names over 80 characters (may vary depending on the 

character set) may not be displayed.

•  Do not disconnect a Home network server from the TV while 

transferring files, using the slide show function, when a screen 
is switching to another or before you exit “Home network” from 
the “INPUT” menu.

•  Do not connect and disconnect a Home network server from 

the TV repeatedly.

Use an ETHERNET cable to connect the ETHERNET 
terminal on the TV to your broadcast router as shown 
below. This is recommended when enjoying services 
which require stable connection speeds, such as 
streaming media.

E

 



PC

 



Router (commercially available)

 



ETHERNET cable (commercially available)

 



Network

E

LAN

 



ETHERNET cable

 

Switch on the router (commercially available). 
Refer to the router’s operation manual for 
switching on.

 

Connect the ETHERNET terminal on the TV 
to the router (commercially available) with an 
ETHERNET cable (commercially available).

 

Go to “Menu” > “Setup” > “View setting” > 
“Network setup” > “Country”.

 

Press 

a/b/c/d to select your country or 

area, and then press 

;.

 

Press 

a/b to select “Connection type” in the  

“Network setup” menu.

 

Press 

c/d to select “Wired”, and then press 

;.

•  The wired connection will be automatically established. 

To change the settings manually, go to “Menu” > “Setup” 
> “View setting” > “Network setup” > “IP setup” and 
follow the on-screen instructions and the operation 
manual of the router.

 

Select “OK” to confirm.

•  If you have failed to connect to the internet in the above 

operation, an error massage will appear. In this case, 
press ATV/DTV/SAT/b to return to the normal TV 
screen and check the relevant settings.

LC-60LE925E_GB_ver4.indd   55

LC-60LE925E_GB_ver4.indd   55

2010/08/17   16:43:18

2010/08/17   16:43:18

Use the wireless LAN USB adapter supplied with the TV.

E

 



PC

 



Wireless LAN router/access point

 



Wireless LAN USB adapter (supplied)

 



Network

•  When using the SHARP wireless LAN USB adapter (supplied), 

try to provide as much free space around the device for best 
performance.

•  Make sure the firewalls in your network allows access to the TV 

wireless connection.

•  Operations cannot be guaranteed when used with access 

points that do not have Wi-Fi® certification.

•  A wireless LAN access point is required to connect the TV to 

the Internet using a wireless LAN. See the operation manual of 
your access point for setup.

E

 

Switch on your router before starting the 
network installation.

 

Connect the wireless LAN USB adapter 
(supplied) to the USB port on the TV.

•  Do not use a wireless LAN adapter other than the 

supplied SHARP wireless LAN adapter, as operations 
cannot be guaranteed.

 

Go to “Menu” > “Setup” > “View setting” > 
“Network setup” > “Country”.

 

Press 

a/b/c/d to select your country or 

area, and then press 

;.

 

Press 

a/b to select “Connection type” in the  

“Network setup” menu.

 

Press 

c/d to select “Wireless”, and then 

press 

;.

 

Select “OK” to confirm.

 

Press 

a/b to select “Wireless setup” in the  

“Network setup” menu.

 

Press 

c/d to select “Change”, and then 

press 

;.

 

0

Press 

a/b to select “WPS”, and then press 

;.

•  If your router/access point does not support WPS (= 

Wi-Fi Protected Setup), select “Search” and follow the 
on-screen instructions and the operation manual of the 
router/access point.

•  To establish the connection manually, select “Manual 

setup” and follow the on-screen instructions and the 
operation manual of the router/access point.

WPS

Search

Manual Setup

 

Q

Press 

a/b to select “Push button”, and then 

press 

;.

•  To establish the connection manually, select “PIN code”. 

Follow the on-screen instructions and the operation 
manual of the router/access point.

Push button

PIN code

 

W

Select “Next” to proceed.

 

E

Press the WPS button on the router/access 
point. When you press the WPS button, a 
progress bar will appear on the display. Wait 
until the connection is established.

 

R

Select “OK” when the connection details are 
displayed.

•  If you have failed to connect to the internet in the above 

operation, an error massage will appear. In this case, 
press ATV/DTV/SAT/b to return to the normal TV 
screen and check the relevant settings.

•  To connect your TV to the internet, you must have a broadband  

internet connection.

•  If you do not have a broadband internet connection, consult the 

store where you purchased your TV or ask your internet service 
provider or telephone company.

•  There is no need to enter the security key for subsequent 

connections to the wireless network.

•  If your access point is set to a stealth mode (that prevents 

detection by other devices), you may not be able to establish 
a connection. In this case, disable the stealth mode on the 
access point.

•  To change a wireless LAN connection settings, go to “Menu” > 

“Setup” > “View setting” > “Network setup” > “Wireless setup”.

•  See page 76 to check the supplied SHARP wireless LAN adapter 

specifications.

LC-60LE925E_GB_ver4.indd   56

LC-60LE925E_GB_ver4.indd   56

2010/08/17   16:43:19

2010/08/17   16:43:19

Net TV offers internet service and websites tailored for your TV. Use the TV remote control unit to browse the Net TV 
internet pages. You can play movies, view pictures, listen to music, play games and much more. Net TV provides variety 
of services for each country. You can browse other countries’ service as well. If a service is unsuitable for children, you 
can lock it as needed.

•  Because Net TV is an online system, it can be modified over time to better serve its purpose.
•  Some Net TV services may be added, changed or discontinued after some time.
•  Some open internet websites may not be tailored for a TV screen and may not be displayed correctly.
•  You cannot download and save files nor install plug-ins.

•  SHARP corporation bears no responsibility regarding the content and quality of the content provided by the content serve provider.

The illustrations on this page are for explanation purposes. They are subject to change without notice.

E

Press NET.

•  You can also display the Net TV start page with pressing 

b and select “NET” or go to “Menu” > “CH list” > 
“INPUT” > “NET”.

•  When switching to Net TV, a message which requests a 

software update may display in some cases.

E

Press 

a/b/c/d to select the desired 

service, and then press 

;.

• Press : r/s to scroll pages up/down (This may not 

function for some services).

• Press 

6 to return to the previous page (This may not 

function for some services).

• Press 

> to return to the Net TV start page.

E

Press ATV/DTV/SAT.

•  You can exit from Net TV by pressing b and select 

another input source.

Press CONTROL and the option menu displays. Press 

a/b to select the desired menu item, and then press ;.

E

Changes some settings, such as lock/unlock the service, for Net TV.

•  This may not function for some services.

 

Select “User setting”, and then press 

;.

 

Press 

a/b/c/d to select the desired operation, and then press ;.

LC-60LE925E_GB_ver4.indd   57

LC-60LE925E_GB_ver4.indd   57

2010/08/17   16:43:21

2010/08/17   16:43:21

E

Displays an on-screen control panel for watching online contents.

 

Select “Control panel”, and then press 

;.

 

Press 

a/b/c/d to select the desired operation, and then press ;.

 

Press 

> to exit.

I

Playback

H

Stop

F

Pause

J

Fast forward

G

Reverse

•  These operations can also be done by pressing the corresponding buttons (I/H/J/G) on the remote control unit.
•  The control panel may not function on some services.

E

Refreshes the page you are browsing. If an error occurs while loading the page, execute this function and reload it.

Select “Reload”, and then press 

;.

E

Adjusts the display size of the page you are browsing.

 

Select “Zoom”, and then press 

;.

 

Press 

c/d to adjust the display size.

 

Press 

> to exit.

Zoom

[100] 20

400

：Adjust

END

 :Exit

E

Shows information regarding the security of the page you are browsing.

 

Select “Security info.”, and then press 

;.

 

Select “OK” or press 

> to exit.

When you select an input field on a page, the software keyboard (Page 7) will appear.

You can clear the Net TV memory, which includes the lock code, passwords, cookies and browsing history.
Go to “Menu” > “Setup” > “View settings” > “Clear Net TV memory”.

•  PIN input is required when executing “Clear Net TV memory”. The default PIN is “1234”. To change the PIN setting, refer to Password/

 (Page 38). To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN (Page 69).

•  This function is available only while browsing Net TV.

•  If you exercise this operation, Net TV will be completely initialized. If there is important information for you, take notes before executing.

LC-60LE925E_GB_ver4.indd   58

LC-60LE925E_GB_ver4.indd   58

2010/08/17   16:43:22

2010/08/17   16:43:22