Sharp LC-60LE925E (serv.man22) User Manual / Operation Manual ▷ View online
11
Initial installation overview
Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending
on your TV installation and connection.
on your TV installation and connection.
Preparation
Connect an antenna cable to the
antenna terminal (Page 12).
antenna terminal (Page 12).
If necessary, insert a CA
card into the CI slot to watch
scrambled broadcasts (Page 12).
card into the CI slot to watch
scrambled broadcasts (Page 12).
Plug the AC cord into the AC
outlet (Page 12).
outlet (Page 12).
Product shape varies in some
countries.
Run the
initial
settings
Check that the MAIN POWER
switch on the rear of the TV is
turned on (;).
switch on the rear of the TV is
turned on (;).
• The factory default for the MAIN
POWER switch is set to on (;).
Turn on the power using
<a on the TV (Page 18).
<a on the TV (Page 18).
Run the initial auto installation
(Pages 13_16).
(Pages 13_16).
✔
Language setting
✔
Home/Store setting
✔
Country setting
✔
Channel search
setting (“Digital
search”/“Analogue
search”/“Skip”)
setting (“Digital
search”/“Analogue
search”/“Skip”)
Start searching
channels
Watch TV
Congratulations!
Now you can watch TV.
Now you can watch TV.
If necessary, adjust the antenna
to attain maximum signal
reception (Page 17).
to attain maximum signal
reception (Page 17).
Connect external
devices
Connect external devices
such as a DVD player/
recorder as instructed (Pages
24_26).
such as a DVD player/
recorder as instructed (Pages
24_26).
Connect external audio
devices such as speakers/
amplifier as instructed (Page
26).
devices such as speakers/
amplifier as instructed (Page
26).
Quick guide
LC-60LE925E_GB_ver4.indd 11
LC-60LE925E_GB_ver4.indd 11
2010/08/17 16:42:00
2010/08/17 16:42:00
12
Before turning on the power
p
o
r
q
2
1
n
Standard DIN45325 plug (IEC 169-2) 75
q coaxial cable
Satellite antenna cable
AC cord (product shape varies in some countries)
Check that the MAIN POWER switch on the rear of the TV is turned on
(;).
(;).
Cable clamp (bundle the cables with the clamp)
Place the TV close to the AC outlet,
and keep the power plug within
reach.
and keep the power plug within
reach.
Inserting the CA card into the CI module
In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the
CI slot of the TV.
CI slot of the TV.
1
Carefully insert the CI module in
the CI slot with the contact side
forward.
the CI slot with the contact side
forward.
2
The logo on the CI module must
be facing outward from the rear
of the TV.
be facing outward from the rear
of the TV.
Checking CI module information
Go to “Menu” > “Setup” > “Option” > “CI menu”.
• This menu is only available for digital stations.
• The content of this menu depends on the provider of the CI module.
• The content of this menu depends on the provider of the CI module.
Module
General information on CI module displays.
Menu
Adjustment parameters of each CA card displays.
Enquiry
You can input numerical values such as passwords here.
NOTE
• It takes about 30 seconds to certify the license key when you insert a CA card into the CI+ compatible CI module for the first time. This
process may fail when there is no antenna input or you have never run “Auto installation”.
• The CI+ compatible CI module sometimes upgrades its firmware. You may not receive any TV images before upgrading. You can only use
the power button during upgrading.
• The CI+ compatible CI module does not allow you to output any copy protected programmes using monitor out. In this case, the copy
protect icon* is shown in the programme information when P. INFO is pressed.
* Protect
icon:
X
• If the TV displays an update confirmation message for the CA card while receiving CI+ compatible broadcasts, follow the screen prompts.
• Make sure that the CI module is properly inserted.
• Make sure that the CI module is properly inserted.
Quick guide
LC-60LE925E_GB_ver4.indd 12
LC-60LE925E_GB_ver4.indd 12
2010/08/17 16:42:09
2010/08/17 16:42:09
13
Initial auto installation
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings one
after another.
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings one
after another.
Confirm the following before turning on
the power
the power
E Is the antenna cable connected?
E Is the AC cord plugged in?
E Is the MAIN POWER switch turned on (;)?
1
Press <a on the TV.
• The initial auto installation wizard appears.
2
Setting the OSD language.
Press
a/b/c/d to select the desired language,
and then press
;.
3
Selecting the location of the TV.
HOME
STORE
Press
c/d to select where you will use this TV,
and then press
;.
• The confirmation screen pops up only when selecting
“STORE”. Press
c/d to select “Yes” or “No”.
• HOME: “STANDARD” will be the default value for the “AV
mode” setting.
• STORE: “DYNAMIC (Fixed)” will be the default value for
the “AV mode” setting. If the “AV mode” is changed, the
TV will automatically switch back to “DYNAMIC (Fixed)”
when there is no signal input from the TV or remote
control unit for 30 minutes.
TV will automatically switch back to “DYNAMIC (Fixed)”
when there is no signal input from the TV or remote
control unit for 30 minutes.
• STORE: A demonstration image will be displayed after
initial auto installation is completed. If you have chosen
“STORE” by mistake, go to “Setup” > “View setting” >
“Reset” > select “HOME” again.
“STORE” by mistake, go to “Setup” > “View setting” >
“Reset” > select “HOME” again.
4
Setting the country.
Press
a/b/c/d to select your country or area,
and then press
;.
• This setting screen only appears during the first
installation.
NOTE
• If you set “Sweden” in the country setting, you can select
the cable provider “ComHem”. Refer to the
H mark
in the following steps or instructions about the settings for
“ComHem”.
“ComHem”.
5
Starting channel search.
Digital search
Analogue search
Skip
Press
a/b to select “Digital search”, “Analogue
search” or “Skip”, and then press
;.
• To watch both analogue broadcasts, digital broadcasts
and satellite broadcasts, you should perform the auto
installation setting for each format (Page 35).
installation setting for each format (Page 35).
• If you want to search for more broadcasts, execute
“Additional search” from the “Programme setup” menu
(Pages 35_37).
(Pages 35_37).
• When you select “Skip”, only “Satellite search” will be
performed. You should perform “Digital search” and
“Analogue search” from “Auto installation” under the
“Setup” menu if needed.
“Analogue search” from “Auto installation” under the
“Setup” menu if needed.
• After performing “Digital search” or “Analogue search”,
the screen switches to the “Satellite search” setting. You
should then execute “Yes” if you want to search for the
satellite channels.
should then execute “Yes” if you want to search for the
satellite channels.
NOTE
• If you turn off the power on the TV while performing a channel
search, the initial auto installation wizard will not appear. The
auto installation function allows you to execute the installation
again from “Setup” > “View setting” (Page 35).
auto installation function allows you to execute the installation
again from “Setup” > “View setting” (Page 35).
• The initial auto installation wizard will abort if you leave the TV
unattended for 30 minutes before searching for channels.
• After initial auto installation is completed, the default PIN is
automatically set to “1234”. To change the PIN setting, refer
to Password/Lock settings (Page 38). To clear the PIN setting
(PIN input will no longer be needed), refer to CLEARING THE
PIN
to Password/Lock settings (Page 38). To clear the PIN setting
(PIN input will no longer be needed), refer to CLEARING THE
PIN
(Page 69).
• When “Italy” is selected in the country setting, the default age
restriction value is set to 18.
Digital broadcast setting
Press
c/d to select “Terrestrial” or “Cable”,
and then press
;.
Terrestrial
Cable
H
• When you set “Sweden” in the country setting and select
“Cable” for the searching format, you can select the
cable provider “ComHem”.
cable provider “ComHem”.
E
Searching for terrestrial broadcasts
The TV searches for, sorts and stores all the
receivable TV stations according to their
settings and the connected antenna.
receivable TV stations according to their
settings and the connected antenna.
• To abort the initial auto installation in progress, press 6.
After searching for DVB-T channels, the
screen switches to the “Satellite search”
setting (Page 15).
screen switches to the “Satellite search”
setting (Page 15).
Quick guide
LC-60LE925E_GB_ver4.indd 13
LC-60LE925E_GB_ver4.indd 13
2010/08/17 16:42:11
2010/08/17 16:42:11
14
Quick guide
E
Searching for cable broadcasts
To change each item to the appropriate
settings:
settings:
1
Press
a/b to select the menu, and then
press
;.
Scrambled stations
[Yes]
Search method
[Channel]
Start frequency
Network ID
[None]
Symbol rate 1
Symbol rate 2
QAM modulation 1
QAM modulation 2
Reset
Search start
2
Press
a/b/c/d or 0_9 to select or input
the appropriate item/value, and then press
;.
;.
3
Press
a/b to select “Search start”, and then
press
;.
4
Press
c/d to select “Yes” to start searching
cable broadcasts, and then press
;.
5
The TV searches for, sorts and stores all
the receivable TV stations according to their
settings and the connected antenna.
the receivable TV stations according to their
settings and the connected antenna.
• To abort the initial auto installation in progress, press 6.
After searching for DVB-C channels, the
screen switches to the “Satellite search”
setting (Page 15).
screen switches to the “Satellite search”
setting (Page 15).
H
• The “Scrambled stations” menu and the “Search method”
menu are not displayed on the screen as each menu item is
fixed.
fixed.
• The value of “Start frequency” and “Network ID” should be set
to the value specified by the cable provider.
Menu
Description
Selectable items
Scrambled
stations
stations
Specifies if you
need to add pay-TV
services.
need to add pay-TV
services.
Yes, No
Search
method
method
Specifies how you
search channels.
search channels.
Channel: Extracts all
of information from a
channel (quick, but
needs corresponding
TV stations).
Frequency: Checks
every frequency in
range (slow).
Quick*
of information from a
channel (quick, but
needs corresponding
TV stations).
Frequency: Checks
every frequency in
range (slow).
Quick*
2
: All services
are searched by
one frequency. This
menu works only
when your cable
provider provides
the frequency and
the network ID (e.g.,
Homing channel).
one frequency. This
menu works only
when your cable
provider provides
the frequency and
the network ID (e.g.,
Homing channel).
Start
frequency
frequency
From 47.0_858.0
MHz
MHz
Network ID
Specifies the network.
Set this to register
only the specified
network ID without
registering any special
services.
Set this to register
only the specified
network ID without
registering any special
services.
None, 0_65535
Symbol rate
1*
1*
1
The symbol rates
are specified by the
cable provider. Input
the value received for
CATV.
are specified by the
cable provider. Input
the value received for
CATV.
1000_9000
Symbol rate
2*
2*
1
The symbol rates
are specified by the
cable provider. Input
the value received for
CATV.
are specified by the
cable provider. Input
the value received for
CATV.
1000_9000
QAM
modulation 1
modulation 1
16, 32, 64, 128, 256
QAM
modulation 2
modulation 2
None, 16, 32, 64,
128, 256
128, 256
I
Set up “Symbol rate 2” if the cable provider uses several
symbol rates.
symbol rates.
J
When “Quick” is selected, “Scrambled stations” is automatically
set to “No”.
set to “No”.
J
When “Quick” is selected, “None” for the “Network ID” menu
cannot be selected.
cannot be selected.
H
• When you set “Sweden” in the country setting and select
“Cable” for the searching format, you can select the cable
provider “ComHem”. Follow the screen prompts.
provider “ComHem”. Follow the screen prompts.
Analogue broadcast setting
The TV searches for, sorts and stores all the
receivable TV stations according to their
settings and the connected antenna.
receivable TV stations according to their
settings and the connected antenna.
• To abort the initial auto installation in progress, press 6.
After searching for analogue channels, the
screen switches to the “Satellite search”
setting (Page 15).
screen switches to the “Satellite search”
setting (Page 15).
LC-60LE925E_GB_ver4.indd 14
LC-60LE925E_GB_ver4.indd 14
2010/08/17 16:42:12
2010/08/17 16:42:12
Click on the first or last page to see other LC-60LE925E (serv.man22) service manuals if exist.