Sharp LC-60LE925E (serv.man22) User Manual / Operation Manual ▷ View online
15
Searching for satellite broadcasts
Press
c/d to select “Yes”, and then press
;
.
Yes
No
• If you do not perform “Satellite search” setting, select
“No”, and then press
;.
• The current DVB-S/S2 setting screen is displayed.
Next
other
Satellite
LNB Frequency
Low
Low
High
Satellite System
Max. 4 satellites on DiSEqC multiswitch
Change setting
• You must first complete “Change setting” before moving
to the “Next” setting.
1 When starting the satellite search
after setting the scrambled stations:
Press
c/d to select “Next”, and then press
;.
NOTE
• When you perform the initial auto installation, “Next” cannot be
selected. Completing “Change setting” enables you to select
“Next”.
“Next”.
Start search
other
Satellite
Symbol rate 1
Symbol rate 2
Scrambled stations: No
Change setting
E
Start search:
DVB-S/S2 channel searching.
1
Press
c/d to select “Start search”, and then
press
;.
2
The TV searches for and stores all the
receivable TV stations according to their
settings and the connected antenna.
receivable TV stations according to their
settings and the connected antenna.
• Select “Yes” to sort the search result in alphabetical
order.
• To abort the initial auto installation in progress, press 6.
E
Change setting:
1
Press
c/d to select “Change setting”, and
then press
;.
• The setting screen of “Scrambled stations” and “Symbol
rate” is displayed.
Scrambled stations
[No]
Search start
SAT1-Symbol rate 1
SAT1-Symbol rate 2
SAT2-Symbol rate 1
SAT1-Symbol rate 2
SAT2-Symbol rate 1
Yes
No
2
Press
a/b to select “Scrambled stations”,
and then press
;.
• Scrambled stations: Specifies if you need to add pay-TV
services.
3
Press
c/d to select “Yes”, and then press
;.
4
Press
a/b to select the symbol rate you
want to modify, and then press
;.
• Symbol rate: You need to set each symbol rate of all
the satellite broadcasts that the TV can receive (eight
is the maximum number of symbol rates that can be
displayed).
is the maximum number of symbol rates that can be
displayed).
5
Press
c/d to select “Search start”, and then
press
;.
6
The TV searches for and stores all the
receivable TV stations according to their
settings and the connected antenna.
receivable TV stations according to their
settings and the connected antenna.
• Select “Yes” to sort the search result in alphabetical
order.
• To abort the initial auto installation in progress, press 6.
Quick guide
LC-60LE925E_GB_ver4.indd 15
LC-60LE925E_GB_ver4.indd 15
2010/08/17 16:42:13
2010/08/17 16:42:13
16
2 When you change the antenna
connection setting:
Press
c/d to select “Change setting” on the
DVB-S/S2 setting screen in the left column,
and then press
and then press
;.
• The antenna connection setting screen is displayed.
Single satellite
2 satellites on 22kHz switchbox
2 satellites on toneburst switchbox
Max. 4 satellites on DiSEqC multiswitch
Communal satellite system
NOTE
• You can select the antenna connection method from the five
types. Consult your dealers before using a method other than
“Single satellite”.
“Single satellite”.
E
“Single satellite” setting
1
Press
a/b to select “Single satellite”, and
then press
;.
2
Press
a/b to select “SAT1 [None]” to display
the satellite broadcasts that the TV can
receive, and then press
receive, and then press
;.
SAT1 [None]
Next
3
Press
a/b/c/d to select your favorite
satellite, and then press
;.
• You cannot select “Next” unless you set the satellite
broadcast in step 3.
Euro Bird 1
Atlantic Bird 1
4
Press
a/b to select “Next”, and then press
;.
SAT1 [ASTRA 1]
Next
5
Press
c/d to select “Yes (0/22kHz)” or “No”
to set the LNB frequency, and then press
;.
Yes (0/22kHz)
No
6
Press
a/b to select the item and press c/d
to adjust 9,000 MHz to 12,000 MHz to the
appropriate value.
appropriate value.
EXAMPLE
SAT1 low
SAT1 high
OK
7
Press
a/b to select “OK”, and then press
;.
After completing this setting, the screen
switches to the DVB-S/S2 setting screen
shown in the left column on page 15.
switches to the DVB-S/S2 setting screen
shown in the left column on page 15.
NOTE
• Follow the instructions on the screen for “2 satellites on 22kHz
switchbox”, “2 satellites on toneburst switchbox”, “Max. 4
satellites on DiSEqC multiswitch” and “Communal satellite
system” settings.
satellites on DiSEqC multiswitch” and “Communal satellite
system” settings.
• To set multiple satellite channels, go to “Max. 4 satellites on
DiSEqC multiswitch”.
Quick guide
LC-60LE925E_GB_ver4.indd 16
LC-60LE925E_GB_ver4.indd 16
2010/08/17 16:42:15
2010/08/17 16:42:15
17
Quick guide
Checking signal strength and
channel strength (DVB-T/C/S/S2)
channel strength (DVB-T/C/S/S2)
If you install a DVB-T/C/S/S2 antenna for the first time
or relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking the
antenna setup screen.
or relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking the
antenna setup screen.
1
Go to “Menu” > “Setup” > “View setting”
> “Channel settings” > “Antenna setup-
DIGITAL”.
> “Channel settings” > “Antenna setup-
DIGITAL”.
2
Press
a/b to select “Digital setup” or
“Satellite setup”, and then press
;.
E
Checking signal strength
3
Press
a/b to select “Signal strength”, and
then press
;.
Signal strength for DVB-T/C
Supply voltage
CH No.
Current
Max.
Signal strength
Signal strength
Channel strength
Current
Max.
Quality
Signal strength for DVB-S/S2
Current
Max.
Signal strength
Signal strength
Channel strength
Current
Max.
Quality
E
Checking channel strength
4
Press
a/b to select “Channel strength”, and
then press
;.
• You can input a specified frequency band using the 0_9
numeric buttons.
Channel strength of DVB-T
Supply voltage
CH No.
Current
Max.
Signal strength
MHz
Signal strength
Frequency
Channel strength
Current
Max.
Quality
Channel strength of DVB-C
Supply voltage
Current
Max.
Signal strength
MHz
Signal strength
Frequency
Symbol rate
QAM modulation
Symbol rate
QAM modulation
Channel strength
Current
Max.
Quality
Channel strength of DVB-S/S2
Current
Max.
Signal strength
MHz
Signal strength
Frequency
Symbol rate
Band
Symbol rate
Band
Channel strength
Current
Max.
Quality
Vert/Low
5
Position and align the antenna so that
the maximum possible values for “Signal
strength” and “Quality” are obtained.
the maximum possible values for “Signal
strength” and “Quality” are obtained.
NOTE
• The values of “Signal strength” and “Quality” indicate when to
check the appropriate alignment of the antenna.
Supplying power to the antenna
You must supply power to the antenna in order to receive digitally/terrestrially broadcast stations or satellite
broadcast stations after connecting the antenna cable to the antenna terminal on the rear of the TV.
broadcast stations after connecting the antenna cable to the antenna terminal on the rear of the TV.
1
Press @ and the “Menu” screen displays.
2
Press
c/d to select “Setup”, and then press ;.
3
Press
c/d to select “View setting”, and then press ;.
4
Press
a/b to select “Channel settings”, and then press ;.
5
Press
a/b to select “Antenna setup-DIGITAL”, and then press ;.
6
Press
a/b to select “Supply voltage”, and then press ;.
7
Press
c/d to select “On”, and then press ;.
LC-60LE925E_GB_ver4.indd 17
LC-60LE925E_GB_ver4.indd 17
2010/08/17 16:42:18
2010/08/17 16:42:18
18
Daily operation
Switching on/off
Turning on/off the power
1
Turn on (;) the MAIN POWER switch on the
rear of the TV (Page 5).
rear of the TV (Page 5).
2
To turn on the TV, press <a on the TV
or >a on the remote control unit.
or >a on the remote control unit.
3
To turn off the TV, press <a on the TV
or >a on the remote control unit.
or >a on the remote control unit.
4
Turn off (a) the MAIN POWER switch on the
rear of the TV (Page 5).
rear of the TV (Page 5).
• When turning off the power using the MAIN POWER
switch on the rear of the TV, EPG data will be lost.
Standby mode
E
To standby mode
If the MAIN POWER switch on the rear of the TV is
turn on (;), you can switch it to standby by pressing
<a on the TV or >a on the remote control unit.
turn on (;), you can switch it to standby by pressing
<a on the TV or >a on the remote control unit.
E
Switching on from standby
From standby, press <a on the TV or >a on
the remote control unit.
the remote control unit.
NOTE
• If you are not going to use this TV for a long period of time, be
sure to remove the AC cord from the AC outlet or turn off (a)
the MAIN POWER switch on the rear of the TV (Page 5).
the MAIN POWER switch on the rear of the TV (Page 5).
• A small amount of electric power is still consumed even when
the MAIN POWER switch is turned off (a) (Page 5).
Switching between digital,
satellite and analogue broadcasts
satellite and analogue broadcasts
Watching digital
broadcasts
broadcasts
Watching analogue
broadcasts
broadcasts
Watching satellite
broadcasts
broadcasts
NOTE
• If a number of satellite channels are set, each time you press
the SAT button the channel switches as follows.
SAT1
SAT2
SAT3
SAT4
Changing channels
With :r/s
With 0_9
Watching TV
LC-60LE925E_GB_ver4.indd 18
LC-60LE925E_GB_ver4.indd 18
2010/08/17 16:42:20
2010/08/17 16:42:20
Click on the first or last page to see other LC-60LE925E (serv.man22) service manuals if exist.