DOWNLOAD Sharp LC-45GD1E (serv.man44) Service Manual ↓ Size: 1.56 MB | Pages: 7 in PDF or view online for FREE

The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should
the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked 

 or 

ASA

 and of the same rating

as above, which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the
mains plug and fit an appropriate type.

DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of
in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious
electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:

IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:

As the colours of the wires in the mains lead of this product may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
• The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
• The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.
Before replacing the plug cover make sure that:
• If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
• The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

OPERATION MANUAL

ENGLISH

Optional accessories ………………………………… 5

Where to place the System …………………………… 6
Setting the System …………………………………… 7
Setting the AVC System with the stand

…………… 9

Removing speakers …………………………………… 10
Removing the stand …………………………………… 11
Setting the Display on the wall ……………………… 11
Inserting the batteries ………………………………… 12
Using the remote control unit ………………………… 12

Cautions regarding remote control unit

……… 12

Basic connection ……………………………………… 13

Connecting to an antenna ……………………… 13
Connecting to the power outlet ………………… 13

Initial auto installation ………………………………… 14
Virgin mode …………………………………………… 15

Display ………………………………………………… 16
AVC System …………………………………………… 17
Remote control unit …………………………………… 18

Turning on the power ………………………………… 20
Turning off the power ………………………………… 20
Simple button operations for changing channels … 21
Using Flashback (A) on the remote control unit

… 21

Simple button operation for changing

volume/sound

…………………………………… 23

Menu operation buttons ……………………………… 24
On-Screen Display …………………………………… 24
TV/AV input mode menu items ……………………… 25
PC input mode menu items

………………………… 25

Auto installation

……………………………………… 26

Programme setup ……………………………………… 26

Auto search ……………………………………… 26
Manual setting for each channel ……………… 27

Fine tuning …………………………………… 27
Colour system

……………………………… 28

Sound system (Broadcasting system) …… 28
Labelling channels ………………………… 28
Skipping channels

………………………… 29

Setting the decoder ………………………… 29
Setting the child lock

……………………… 29

Setting the booster ………………………… 29

Sort ………………………………………………… 30
Erase Programme ………………………………… 30

DTV input mode menu items ………………………… 31
Selecting DTV mode

………………………………… 31

About colour buttons ………………………………… 31
Icons …………………………………………………… 32
Time Zone ……………………………………………… 32
Search

………………………………………………… 32

Found TV services …………………………………… 33
Found radio services ………………………………… 33
Store …………………………………………………… 33
Discard ………………………………………………… 33
Banner duration

……………………………………… 34

Info banner

…………………………………………… 34

Audio …………………………………………………… 34
Subtitle ………………………………………………… 35
Teletext ………………………………………………… 35
Reinstall all services

………………………………… 35

Access restrictions …………………………………… 36
Maturity rating ………………………………………… 36
TV services

…………………………………………… 36

Radio services ………………………………………… 36
Selecting programme ………………………………… 36
Setting the theme ……………………………………… 37
Using EPG (Electronic Programme Guide) ………… 38
Mode …………………………………………………… 39
Audio language

……………………………………… 39

Subtitle language ……………………………………… 39
Service list type

……………………………………… 39

Rearrange TV services

……………………………… 40

Rearrange radio services …………………………… 40
New TV services ……………………………………… 40
New radio services …………………………………… 40
Installed TV services ………………………………… 41
Installed radio services ……………………………… 41
Uninstalled TV services ……………………………… 41
Uninstalled radio services …………………………… 41
Country ………………………………………………… 41
System software ……………………………………… 41
Using Over Air Download function

………………… 42

Enabling Software download ………………………… 42
Performing Over Air Download ……………………… 42
Common Interface …………………………………… 43

LC-45GD1E(E)-a

04.9.27, 9:57 AM

1

Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered
trademarks of BBE Sound, Inc.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks
of Dolby Laboratories.

This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user
may be required to take adequate measures.

Language setting for on-screen display …………… 44
OPC setting …………………………………………… 44
Picture adjustments …………………………………… 45

C.M.S. (Colour Management System) ………… 46
Colour temperature ……………………………… 46
Sharpness Enhancement

……………………… 46

Automatic Contrast ……………………………… 46
I/P setting ………………………………………… 47
Film mode ………………………………………… 47
3D-Y/C

…………………………………………… 47

Monochrome ……………………………………… 47

Audio adjustment ……………………………………… 48
Dolby Virtual …………………………………………… 48
Power control

………………………………………… 49

Power control for AV source …………………… 49
Power control for PC source …………………… 49

Important notes on using memory cards …………… 50
Card Setup mode menu items ……………………… 52
Recording a still image ……………………………… 53
Displaying a still image ……………………………… 54
Displaying slide show ………………………………… 54
Setting slide show

…………………………………… 54

My Programme ………………………………………… 55
Audio Select …………………………………………… 55
Protecting/unprotecting still image files …………… 55
Deleting a still image file ……………………………… 56
Deleting all still image files …………………………… 56
Recording a motion picture

………………………… 56

Displaying a motion picture ………………………… 57
Rec. Mode ……………………………………………… 57
Pre-recording

………………………………………… 57

Repeat ………………………………………………… 57
Protecting/unprotecting motion picture files

……… 58

Deleting a motion picture file ………………………… 58
Deleting all motion picture files ……………………… 58
Format

………………………………………………… 58

Displaying an external equipment image

………… 59

Displaying a DVD image (Example) ………………… 59
Connecting a decoder

……………………………… 60

Connecting a VCR …………………………………… 60
Using AV Link function

……………………………… 61

Connecting a DVD player …………………………… 62
Connecting a game console or camcorder ………… 62
Connecting a PC ……………………………………… 63
Using Digital Audio Output …………………………… 63
Speaker Setup ………………………………………… 64

Connecting external speakers ………………… 64
Selecting speakers ……………………………… 64
External Audio Bypass

………………………… 64

Image position (for TV/AV input mode) ……………… 65
Audio Only ……………………………………………… 65
Auto Sync. adjustment (PC input mode only) ……… 65
Fine Sync. adjustment (PC input mode only) ……… 66
Input Select …………………………………………… 66
Input Label

…………………………………………… 67

Colour system setting (for TV/AV input mode)

…… 67

AV mode selection …………………………………… 68
Wide screen signalling (WSS)

(for TV/AV input mode) …………………………… 68

Picture aspect ratio (for TV/AV input mode)

……… 68

WIDE mode (for TV/AV input mode) ………………… 69
WIDE mode (for PC input mode) …………………… 70
Input signal (PC input mode only) …………………… 71
3D-NR (3D Noise Reduction) ………………………… 71
Quick Shoot …………………………………………… 71
Rotate …………………………………………………… 71
Standby Recording …………………………………… 72
Mosquito Noise Reduction …………………………… 72
Audio out ……………………………………………… 72
Sleep timer

…………………………………………… 72

PIN setting for child lock

(for TV/DTV/AV input mode)

…………………… 73

Centre Channel Input ………………………………… 74

Dual screen functions ………………………………… 75
Teletext function ……………………………………… 76

Troubleshooting

……………………………………… 78

PC compatibility chart ………………………………… 79
Connecting pin assignments for SCART …………… 79
RS-232C port specifications ………………………… 80
Specifications ………………………………………… 82

After changing/resetting the PIN (see page 73 of the operation manual), and/or making any adjust-
ment using the PIN, make sure to perform the following.

• Restart the System by pressing MAIN POWER (

a

a

a

a

a) on the Display for the PIN operation to take

effect successfully.

a

a

a

a

a) on the Display if

B

B

B

B

B)

LC-45GD1E(E)-a

04.9.27, 9:57 AM

2

Electricity is used to perform many useful functions, but it can also cause personal injuries and property
damage if improperly handled. This product has been engineered and manufactured with the highest
priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential
danger, please observe the following instructions when installing, operating and cleaning the product. To
ensure your safety and prolong the service life of your LCD colour TV product, please read the following
precautions carefully before using the product.

1.

Read instructions—All operating instructions must be read and understood before the product is operated.

2.

Keep this manual in a safe place—These safety and operating instructions must be kept in a safe place for
future reference.

3.

Observe warnings—All warnings on the product and in the instructions must be observed closely.

4.

Follow instructions—All operating instructions must be followed.

5.

Attachments—Do not use attachments not recommended by the manufacturer. Use of inadequate attachments
can result in accidents.

6.

Power source—This product must operate on a power source specified on the specification label. If you are
not sure of the type of power supply used in your home, consult your dealer or local power company.

7.

AC cord protection—The AC cords must be routed properly to prevent people from stepping on them or
objects from resting on them. Check the cords at the plugs and product.

8.

Overloading—Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.

9.

Entering of objects and liquids—Never insert an object into the product through vents or openings. High
voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts. For
the same reason, do not spill water or liquid on the product.

10. Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage

and other dangerous conditions. Request a qualified service person to perform servicing.

11. Repair—If any of the following conditions occurs, unplug the AC cord from the AC outlet, and request a

qualified service person to perform repairs.

a. When the AC cord or plug is damaged.
b. When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.

Do not touch the controls other than those described in the operating instructions. Improper adjustment
of controls not described in the instructions can cause damage, which often requires extensive adjustment
work by a qualified technician.

e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates

that the product needs servicing.

12. Replacement parts—In case the product needs replacement parts, make sure that the service person uses

replacement parts specified by the manufacturer, or those with the same characteristics and performance as
the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

13. Safety checks—Upon completion of service or repair work, request the service technician to perform safety

checks to ensure that the product is in proper operating condition.

14. Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product

according to the method recommended by the manufacturer.

Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-
free operation of your product, please read the Important Safety Precautions carefully before using this product.

LC-45GD1E(E)-a

04.9.27, 9:57 AM

3