Sharp LC-45GD1E (serv.man45) User Manual / Operation Manual ▷ View online
6
Preparation
Where to place the System
“System” means the Display and AVC System. First select the location where to place the System.
1
2
Selecting the location of the System
• The Display and the AVC System are connected by the system cable.
(See page 7 for details.)
• Select a place with no direct sunlight and good ventilation.
Setting the System in place
Handling the Display
CAUTION
• When using the TV with the supplied stand attached, do not
remove the speaker. Doing so may disturb the balance leading
to product damage or personal injury.
to product damage or personal injury.
• Do not remove the stand and speaker from the Display unless
using an optional bracket to mount it.
• Keep enough space above and behind the Display.
• When you move the System, carry it by two or more people.
• When you move the System, carry it by two or more people.
• When you move the Display, hold the portion of the Display, not the
speaker.
Handling the AVC System
CAUTION
• Do not put a VCR or other device on the AVC System.
• Keep enough space above and on the sides of the AVC System.
• Do not block the ventilation openings on the top and left side, and
• Keep enough space above and on the sides of the AVC System.
• Do not block the ventilation openings on the top and left side, and
the exhaust fan on the right side.
• Do not spread a thick cloth beneath the AVC System, or cover it
with one, as this can cause overheating and result in malfunction.
System cable
Display
AVC System
CAUTION
Adjust the screen with both
hands. Put one hand on the
Display and rotate the screen
while steadying the stand
with your other hand.
You can adjust the screen
horizontally up to 10 degrees.
Please note that you cannot
adjust the screen vertically with
this model.
hands. Put one hand on the
Display and rotate the screen
while steadying the stand
with your other hand.
You can adjust the screen
horizontally up to 10 degrees.
Please note that you cannot
adjust the screen vertically with
this model.
10 cm
or more
5 cm or more
5 cm or more
Keep enough space
There is an exhaust fan
on the right side.
on the right side.
LC-45GD1E(E)-a
04.9.27, 9:57 AM
6
7
System cable
AVC System (rear view)
AC cord
Display (rear view)
AC cord
System cable
(GREY)**
Connect the plug firmly
until the hooks on both
sides click.
Connect the plug firmly
until the hooks on both
sides click.
(WHITE)*
Connect the plug into the
terminal and secure it by
tightening the thumb screws.
Connect the plug into the
terminal and secure it by
tightening the thumb screws.
Setting the System
After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the
cable clamps for bundling the cables.
Preparation
Press down the four
upper hooks to remove
the cover toward you.
upper hooks to remove
the cover toward you.
Connecting the system cable and the AC cord to the Display
1
2
3
Removing the terminal cover
Connecting the system cable and the AC cord to the AVC System
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
• To comply with the requirements of the CE regulation rules, make sure to attach the terminal cover to the rear of the
display with all the system cables connected before you use this product.
NOTE
* When you unplug the WHITE system cable, make sure you unscrew the screws thoroughly before unplugging the cable.
** When you unplug the GREY system cable, press the hooks on both sides of the cable inward as you unplug the cable gently.
** When you unplug the GREY system cable, press the hooks on both sides of the cable inward as you unplug the cable gently.
Press the two hooks
toward the centre of the
Display and remove the
cover toward you.
toward the centre of the
Display and remove the
cover toward you.
(GREY)
(WHITE)
(BLACK)
(BLACK)
LC-45GD1E(E)-a
04.9.27, 9:57 AM
7
8
Preparation
4
5
Attaching the clamp and bundling the cables with the clamp
Closing the terminal cover
Cable clamp
Insert the cable clamp in the hole on the Display as shown.
Cables come
out from the
small opening.
out from the
small opening.
Fasten the speaker cable
with the holder.
with the holder.
LC-45GD1E(E)-a
04.9.27, 9:58 AM
8
9
Preparation
Setting the AVC System with the stand
How to install the AVC System vertically using the stand unit.
• Use the supplied stand unit for installing the AVC System vertically in an upright position.
• Use the supplied stand unit for installing the AVC System vertically in an upright position.
NOTE
• When mounting the AVC System vertically, always use the supplied stand. Be careful not to block vent holes when
standing up directly on the floor or a flat surface as this can result in equipment failure.
1
Stick each spacer to the
stand as shown.
stand as shown.
Peel each spacer away from the paper
and attach to the four bulging areas
on the stand.
and attach to the four bulging areas
on the stand.
2
Attach each cushion to
the stand as shown.
the stand as shown.
3
Fit the stand to the AVC
System.
System.
Peel each cushion
away from the
paper and attach
to the four areas
at the bottom.
away from the
paper and attach
to the four areas
at the bottom.
Insert the stand into the AVC
System, making sure that the
thick and thin bulges of the
stand align with the big and
small holes on the AVC
System.
System, making sure that the
thick and thin bulges of the
stand align with the big and
small holes on the AVC
System.
Stand
spacer
spacer
Bulge
Stand cushion
Bulge
Hole
4
Attach the stand using the
stand screws as shown.
stand screws as shown.
Stand screw
The AVC System installed
vertically with the stand.
vertically with the stand.
Attaching point
Attaching point
Bulge
LC-45GD1E(E)-a
04.9.27, 9:58 AM
9
