LC-37RD2E (serv.man6). Major IC Informations — Sharp TV Service Manual (repair manual)

Model
LC-37RD2E (serv.man6)
Pages
30
Size
1.52 MB
Type
PDF
Document
Service Manual
Brand
Device
TV / LCD / Major IC Informations
File
lc-37rd2e-sm6.pdf
Date

View Sharp LC-37RD2E (serv.man6) Service Manual online

LC-32RD2E/RU, LC-37RD2E/RU
6 – 1
LC32RD2E
Service Manual
 
CHAPTER 6. 
MAJOR IC INFORMATIONS
[1] MAJOR IC INFORMATIONS
1. MAJOR IC INFORMATIONS
1.1. IC202 (RH-iXB964WJZZQ)
The STv0362 is a single-chip demodulator using COFDM (coded orthogonal frequency division Multiplexing) and is intended for digital terrestrial
receivers using compressed video, sound and data services. It converts IF or base band differential signals to MPEG-2 format by processing OFDM
carriers.
The STv0362 is fully compliant with the DVB-T specification (ETS 300 744) and Nor Dig Unified specification.
1.2. IC201 (VHiTDA9886+-1Y)
The TDA9886 is an alignment-free multi standard (PAL, SECAM and NTSC) vision and sound IF signal PLL demodulator for positive and negative
modulation including sound AM and FM processing.
1.3. IC3001 (RH-iXB960WJZZQ)
The VCT-Pro front-end video processing unit offers 16 analog video inputs (CVBS/Y/C, RGB/Y Cr Cb) as well as digital interfaces for SDTV and
HDTV. Latest 3D+ comb filter generation provides highest performance for PAL/NTSC signals.
A VBI slicer, supporting up to 2000 pages of Teletext completes the analog video front end. 3D-motion-adaptive de-interlacing, temporal noise reduc-
tion and film mode detection are based on a unified memory technology.
1) Stereo Decoder Audio Processing.
2) Video Front-end 3D Comb filter, PC Connectivity.
3) Motion Adaptive Deinterlacing.
4) Scaling, Display Processing and FPD Control.
5) Unified Memory for Audio, Video and Text.
6) Controlling, OSD and Text.
1.4. IC3301 (RH-iXB922WJZZQ)
This is an IC for Frame Rate Converter.
It also has the following functions:
1) Motion Compensated Frame Rate Converter.
2) Film judder reduction by Real Motion HD to provide stunning viewing experience independently of video source format.
3) 2-dimensional luminance sharpness enhancement.
4) Automatic film mode detection to detect the correct source format for best film and video mode.
5) Enhanced resolution (sharpness and contrast, LSE, CSE, DCE, SCE, NCE)
6) Embedded memory controller for external SDRAM.
1.5. IC3361 (RH-iXC024WJZZQ)
The RH-IXC024WJZZQ is a 134, 217, 728-bit CMOS Double Data Rate (DDR) Synchronous DRAM, ideally suited for the main memory applications
which requires large memory density and high bandwidth.
This IC is an external memory for Frame Rate of IC3361.
1.6. IC2301 (RH-iXC009WJZZQ)
The RH-IXC009WJZZQ is a high-speed and high-performance 8-bit single-chip microcomputer with a built-in 61440-byte flash memory.
In this equipment, the R/C LED on the AVC side and system on the display side are controlled.
LC-32RD2E/RU, LC-37RD2E/RU
6 – 2
1.7. IC1951 (VHiSii9025+-1Q)
The Sii9025 is a compliant with the latest HDMI 1.2 (High Definition Multimedia Interface) specification.
Backward compatibility with DVI 1.0 allows HDMI systems to connect to existing DVI 1.0 hosts.
The SiI9025 is capable of receiving and outputting two channel digital audio at up to 192 kHz- an excellent solution for Digital TVs.
An S/PDIF port supports up to 192 kHz audio.
The SiI9025 also comes pre-programmed with HDCP keys, greatly simplifying the manufacturing process, while providing the highest level of HDCP
key security.
1) Dual-Input HDMI 1.2, HDCP 1.1 and DVI 1.0 compliant receiver.
2) Integrated TMDSR core.
3) Digital video interface supports video processors:
• 24-bit RGB/YCbCr 4:4:4
• 16/20/24-bit YCbCr 4:2:2
• 8/10/12-bit YCbCr 4:2:2 (ITU BT.656)
• 12-bit DMO (Digital Multimedia Output) RGB/YCbCr 4:4:4 (clocked with rising & falling edges)
• Color Space Conversion for both RGB-to-YCbCr and YCbCr-to-RGB (both 601 and 709)
• Auto video mode configuration simplifies system firmware design.
4) Digital audio interface supports high-end audio systems:
• One programmable I2S output for connection to low-cost DACs at 32-192kHz.
• S/PDIF output supports PCM, Dolby Digital, DTS digital audio transmission (32-192 kHz Fs) using IEC60958 and IEC61937.
• Auto audio error detection with programmable soft mute.
5) Integrated HDCP decryption engine for receiving protected audio and video content.
6) HDCP Built in Self Test (BIST) lowers cost to test HDCP operation.
7) Pre-programmed HDCP keys provide highest level of key security, simplifies manufacturing.
1.8. IC2361 (VHiTLVD823+-1Q)
The TLVD823 is a 170MHz LVDS (Low Voltage Differential Signaling) 48-bit interface chip set for transmission. It is an LSI for serializing and transmit-
ting RGB signal, HD, VD, blanking signal and pixel clock.
LVDS is a method for transmitting high-speed digital signal via cable driven by low-amplitude differential signal. 1 LINK consists of five pairs of differ-
ential signals.
The TA, TB, TC, and TD pairs are used for data transmission, and the TCLK pair is used for pixel clock transmission. Seven data bits of TA, TB, TC
and TD each (28 in total) are transmitted per pixel clock.
The input RGB (48 bit) signal and sync signal (HD, VD and DE) are allocated to the 56 data which are equal to 2 LINK. The output digital video signal
is sent to the LCD controller circuit.
1.9. IC301/302 (VHiTDA8931T-1Y)
The TDA8931 is a switching power stage for high efficiency class-D audio power amplifier systems.
With this amplifier a compact 1x 20 W closed loop self-oscillating digital amplifier system can be built.
The audio output of LC-32/37RD2E are set to 10W, respectively.
1.10. IC4203 (RH-iXB681WJZZQ)
This IC is a high performance CMOS super technology 16Mbit Flash Memory.
Start software (loader) for the CPU with a built-in digital processor and application software have been written on this Flash Memory.
The digital processor reads these soft wares on start-up and implements them.
1.11. IC4201/4702 (RH-iXB742WJZZQ)
This IC is 64Mb SDRAM (static dynamic random-access memory) IC.
In this equipment, it is used for SMI memory (for image processing), and data is used for operation of the digital processor.
1.12. IC4001 (RH-IXB680WJZZQ)
This is a video/ audio signal processing IC (Digital Processor) (STi5516) for digital tuner, which has been manufactured by ST Microelectronics, and
incorporates a CPU.
In this equipment, it implements GUI processing and video/audio processing for digital tuner, negotiation processing with CI-CARD, etc. 
1.13. IC1702/1741/1758 (VHIMP1415C+-1Y)
The MP1415C is a monolithic step-down switch mode Converter with a built-in internal power MOSFET. It actives 2A continuous output current over
a wide input supply range with excellent load and line regulation.
Current mode operation provides fast transient response and eases loop stabilization.
Fault condition protection includes cycle-by-cycle current limiting and thermal shutdown.
LC-32RD2E/RU, LC-37RD2E/RU
6 – 3
2. Detailed ICs Information
2.1. IC201 (VHiTDA9886+-1Y)
2.1.1 Block Diagram
2.1.2 Pin Connections and short description
Pin No.
Pin Name
I/O
Pin Function
1
VIF1
I
VIF differential input1
2
VIF2
I
VIF differential input2
3
OP1
O
Output1 (open-collector)
4
FMPLL
FM-PLL for loop filter
5
DEEM
O
De-emphasis output for capacitor
6
AFD
I
AF decoupling input for capacitor
7
DGND
Digital ground
8
AUD
O
Audio output
9
TOP
Tuner AGC TakeOver Point (TOP)
10
SDA
I/O
I2C-bus data input/output
11
SCL
I
I2C-bus clock input
12
SIOMAD
O
Sound intercarrier output and MAD select
13
N.C
Not connected
14
TAGC
O
TAGC14tuner AGC output
15
REF
I
4MHz crystal or reference input
16
VAGC
VIF-AGC for capacitor
17
CVBS
O
Video output
18
AGND
Analog ground
19
VPLL
VIF-PLL for loop filter
20
VP
Supply voltage (+5 V)
21
AFC
O
AFC output
22
OP2
O
Output2 (open-collector)
23
SIF1
I
SIF differential input1
24
SIF2
I
SIF differential input2
LC-32RD2E/RU, LC-37RD2E/RU
6 – 4
2.2. IC202 (RH-iXB964WJZZQ)
2.2.1 Pin Connections and short description
Pin No.
Pin Name
I/O
Pin Function
Clock and resets
32
NOT_RESET
I
Hardware reset, active low
15
XTAL_I
I
Analog Crystal oscillator input/external clock (2.5 V)
14
XTAL_O
O
Analog Crystal oscillator output
13
VDDA_2V5
Supply Analog oscillator supply (2.5 V)
16
VDDA_2V5
Supply Analog PLL supply (2.5 V)
Analog interface
1
RF_LEVEL
ADC 8 input for RF level monitoring
2
VDDA_2V5
Analog ADC 8 supply (2.5 V)
3
QP
Positive Q analog input for baseband configuration
4
QM
Negative Q analog input for baseband configuration
5
VDDA_ISO
Analog ISO nwell polarization (2.5 V)
6
VDDA_2V5
Analog ADC 12 supply (2.5 V)
7
REFP
Internal positive reference
8
REFM
Internal negative reference
9
INCM
Internal common mode
10
IM
Negative I analog input for IF and baseband configuration
11
IP
Positive I analog input for IF and baseband configuration
12
VDDA_1.0
Analog supply (1.0 V)
I2C interface
29
SDA
I/O
Serial data (open drain)
30
SCL
I
Serial clock (open drain)
21
SDAT
I/O
SDA tuner (open drain)
20
SCLT
I
SCL tuner
MPEG interface
43
D7
O
Serial MPEG data or parallel MPEG data (bit 7)
42
D6
O
Parallel MPEG data (bit 6)
40
D5
O
Parallel MPEG data (bit 5)
39
D4
O
Parallel MPEG data (bit 4)
37
D3
O
Parallel MPEG data (bit 3)
36
D2
O
Parallel MPEG data (bit 2)
35
D1
O
Parallel MPEG data (bit 1)
33
D0
O
Parallel MPEG data (bit 0)
44
CLK_OUT
O
MPEG byte or bit clock
46
STR_OUT
O
MPEG first byte sync
47
D/NOT_P
O
MPEG data valid/parity
48
ERROR
O
MPEG packet error
Front end controls
18
AGC_RF
I/O
RF AGC control 
 (5 V tolerant)
17
AGC_IF
I/O
IF AGC control 
 (5 V tolerant)
64
TEST
I/O
Reserved test mode, must be grounded.
27
GPIO0
I/O
General-purpose input/output port 0. Reserved test mode, must be grounded.
49
GPIO1
I/O
General-purpose input/output port 1
60
GPIO2
I/O
General-purpose input/output port 2 or lock indicator
59
GPIO3
I/O
General-purpose input/output port 3 or lock indicator
58
GPIO4
I/O
General-purpose input/output port 4
57
GPIO5
I/O
General-purpose input/output port 5
54
GPIO6
I/O
General-purpose input/output port 6
53
GPIO7
I/O
General-purpose input/output port 7
52
GPIO8
I/O
General-purpose input/output port 8. Reserved test mode, must be grounded.
61
GPIO9
I/O
General-purpose input/output port 9
23
AUX_CLK
I/O
Auxiliary clock
25
CS0
I
Chip select LSB
26
CS1
I
Chip select MSB
Power supply
19, 24, 31, 38, 
45, 51, 55, 62
VDD_1V0
Digital core supply (1.0 V)
22, 28, 34, 41, 
50, 56, 63
VDD_3V3
Digital I/O supply (3.3 V)
Page of 30

Download Sharp LC-37RD2E (serv.man6) Service Manual (Repair Manual)

Here you can view online or download Sharp LC-37RD2E (serv.man6) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sharp LC-37RD2E (serv.man6) LCD. Information contained in Sharp LC-37RD2E (serv.man6) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).