Sharp LC-37GA6E (serv.man5) User Manual / Operation Manual ▷ View online
21
• Is the AC cord disconnected? (See page 3.)
• Has the power been turned on? (See page 8.)
• Make sure the a (Power) switch of the TV is set to on.
• Has the power been turned on? (See page 8.)
• Make sure the a (Power) switch of the TV is set to on.
• External influences such as lightning, static electricity, etc., may cause improper operation.
In this case, operate the unit after first turning the power off, or unplugging the AC cord
and re-plugging it in after 1 or 2 minutes.
and re-plugging it in after 1 or 2 minutes.
• Are batteries inserted with polarity (e, f) aligned? (See page 4.)
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated to remote control sensor?
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated to remote control sensor?
• Adjust the picture levels. (See page 10.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the system setting. (See page 16.)
• Check the input type setting of AV SETUP. (See page 17.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the system setting. (See page 16.)
• Check the input type setting of AV SETUP. (See page 17.)
• The unit’s internal temperature has increased.
• Remove any objects blocking vent or clean.
• Check the power control setting. (See page 18.)
• Remove any objects blocking vent or clean.
• Check the power control setting. (See page 18.)
• Is connection to other components correct? (See page 7.)
• Has input type setup of AV SETUP been done correctly after connection? (See page 17.)
• Is the correct input selected? (See page 17.)
• Is a non-compatible signal being input? (See page 18.)
• Is picture adjustment correct? (See pages 10 and 11.)
• Is the antenna connected properly? (See page 3.)
• Has input type setup of AV SETUP been done correctly after connection? (See page 17.)
• Is the correct input selected? (See page 17.)
• Is a non-compatible signal being input? (See page 18.)
• Is picture adjustment correct? (See pages 10 and 11.)
• Is the antenna connected properly? (See page 3.)
• Is the volume too low? (See page 5.)
• Make sure that headphones are not connected. (See page 6.)
• Make sure the sound is not set to Mute. (See page 5.)
• Make sure that headphones are not connected. (See page 6.)
• Make sure the sound is not set to Mute. (See page 5.)
Troubleshooting
Appendix
IMPORTANT NOTE ON DISENGAGING ADVANCED CHILD LOCK
We suggest that you remove the following instruction from the operation manual to prevent children from
reading it. As this operation manual is multilingual, we also suggest the same with each language. Keep it in
a safe space for future reference.
If you have forgotten your personal code number and cannot disengage ADVANCED CHILD LOCK, follow
the procedure below.
reading it. As this operation manual is multilingual, we also suggest the same with each language. Keep it in
a safe space for future reference.
If you have forgotten your personal code number and cannot disengage ADVANCED CHILD LOCK, follow
the procedure below.
1
Press MENU to display the menu screen.
2
Press c/d to select “FEATURES”.
3
Press a/b to select “CHILD LOCK”.
4
Press OK to display the “CHILD LOCK” options.
5
Press a/b to select “CHANGE PIN”.
6
Press OK. The “SECRET NUMBER” screen is displayed.
7
Input “3001” with Programme select (0-9).
8
Press OK to confirm. The “CHANGE YOUR PIN” menu screen is displayed.
9
Input the new four-digit “PIN” with Programme select (0-9).
10
Press OK to confirm the new input.
NOTE
• As a precautionary measure, make a note of your PIN on the back of this operation manual, cut it out and keep it in a safe place that
children cannot reach.
Problem
Possible Solution
• No power.
• Unit cannot be operated.
• Remote control unit does not operate.
• Strange colour, light colour, or dark,
or colour misalignment.
• Power is suddenly turned off.
• No picture.
• No sound.
LC-26/32/37GA6E(E)_c
05.6.29, 7:50 AM
21
22
Item
26o LCD COLOUR TV,
Model: LC-26GA6E
Model: LC-26GA6E
Video Colour System
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV
Function
Function
B/G, I, D/K, L, L’
TV-Standard (CCIR)
Specifications
LCD panel
26o Advanced Super View &
BLACK TFT LCD
BLACK TFT LCD
Number of dots
3,147,264 dots (1366 g 768 g 3 dots)
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
be some deviations from these values in individual units.
NOTE
• Refer to inside back cover for dimensional drawings.
VHF/UHF
E2–E69ch, F2–F69ch, I21–I69ch, IR A–IR Jch
CATV
Hyper-band, S1–S41ch
TV-Tuning System
Auto Preset 99 ch, Auto Label, Auto Sort
STEREO/BILINGUAL
NICAM/A2
Receiving
Channel
Channel
Brightness
450 cd/m
2
Backlight life
60,000 hours (at Backlight Standard position)
Viewing angles
H : 170° V : 170°
Audio amplifier
10 W g 2
Speakers
Ø 8 cm 2pcs
Terminals
SCART (AV input, Y/C input, RGB input, TV output)
EXT 2
EXT 3
S-VIDEO (Y/C input), RCA pin (AV input)
Rear
EXT 1
UHF/VHF 75 q Din type
SCART (AV input/output, Y/C input, AV Link)
Antenna in
EXT 4
RCA pin (Component input), Ø 3.5 mm jack (Audio input)
Appendix
32o LCD COLOUR TV,
Model: LC-32GA6E
Model: LC-32GA6E
32o Advanced Super View &
BLACK TFT LCD
BLACK TFT LCD
37o LCD COLOUR TV,
Model: LC-37GA6E
Model: LC-37GA6E
37o Advanced Super View &
BLACK TFT LCD
BLACK TFT LCD
FM RADIO
Function
Function
87.5-108 MHz
Din type
FM Radio in
Auto Preset 99 ch, Auto Label, Auto Sort
Receiving Frequency
Radio-Tuning System
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is
not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as
this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: f20°C to e60°C.
Storage temperature: f20°C to e60°C.
15.5 kg (Display only),
19.5 kg (Display with stand)
19.5 kg (Display with stand)
18.5 kg (Display only),
22.5 kg (Display with stand)
22.5 kg (Display with stand)
AV OUTPUT
RCA pin (Variable/Fixed)
OSD language
English/German/French/Italian/Spanish/Dutch/Swedish/Portuguese/Finnish/Turkish/Greek/
Russian/Polish
Russian/Polish
Power Requirement
AC 220–240 V, 50 Hz
Power Consumption
110 W (0.8 W Standby)
(Method IEC60107)
(Method IEC60107)
Weight
Headphones
Ø 3.5 mm jack (Audio output)
12 kg (Display only),
15 kg (Display with stand)
15 kg (Display with stand)
135 W (0.8 W Standby)
(Method IEC60107)
(Method IEC60107)
162 W (0.8 W Standby)
(Method IEC60107)
(Method IEC60107)
PC INPUT
D-sub 15 pin (ANALOG RGB), Ø 3.5 mm jack (Audio input)
EXT 5
HDMI (Digital AV input), Ø 3.5 mm jack (Audio input)
LC-26/32/37GA6E(E)_c
05.6.29, 7:50 AM
22
23
Appendix
Corresponding real channel
Band
System
VHF
L/L’
B/G
I
D/K
L/L’
B/G
I
D/K
UHF
CATV
L/L’
B/G
I
D/K
Station Signal
F-2 — F-4
F-5 — F-10
E-5 — E-12
A — H
E-2 — E-4
IR-1(A) — IR-9(J)
E-2 — E-4
E-5 — E-12
F-21 — F-69
E-21 — E-69
R-I — R-XII
I-21 — I-69
E-21 — E-69
B — Q
61 — 74
M1/S1 — M10/S10
17 — 60
U-1/S-11 — U-10/S-20
S-21 — S-41
M-1 — M-7
S’1/S21 — S’5/S25
M1/S1 — M10/S10
B-1 — B-7
U-1/S-11 — U-10/S-20
S-21 — S-41
E-1 — E-41
Real Channel Number
CH-02 — CH-04
CH-05 — CH-10
CH-05 — CH-12
CH-13 — CH-20
CH-02 — CH-04
CH-01 — CH-09
CH-02 — CH-04
CH-05 — CH-12
CH-21 — CH-69
CH-21 — CH-69
CH-71 — CH-82
CH-21 — CH-69
CH-21 — CH-69
CC-01 — CC-16
CC-61 — CC-74
CC-01 — CC-10
CC-17 — CC-60
CC-11 — CC-20
CC-21 — CC-41
CC-42 — CC-48
CC-75 — CC-79
CC-01 — CC-10
CC-49 — CC-55
CC-11 — CC-20
CC-21 — CC-41
CC-42 — CC-63
CC-64 — CC-68
CC-01 — CC-41
Frequency MHz
55.75 — 63.74
176.00 — 216.00
175.25 — 224.25
53.75 — 210.25
48.25 — 62.25
45.75 — 215.25
48.25 — 62.25
175.25 — 224.25
471.25 — 855.25
471.25 — 855.25
49.75 — 223.25
471.25 — 855.25
471.25 — 855.25
116.75 — 296.75
303.25 — 459.25
105.25 — 168.25
120.00 — 292.00
231.25 — 294.25
303.25 — 463.25
115.25 — 163.25
69.25 — 97.25
105.25 — 168.25
231.25 — 279.25
231.25 — 294.25
303.25 — 463.25
48.00 — 304.00
69.25 — 98.25
105.25 — 463.25
Specially available
In France
In Italy
Ireland/(In United Kingdom)
In France
In United Kingdom
In France
In Holland
In Switzerland
In United Kingdom
The Consumer Electronics Industry has initiated a commitment to improve the energy efficiency of TVs. SHARP has signed
this commitment and as a result this TV may have a label on the front of the product informing the customer of the energy
consumption in various operating modes.
this commitment and as a result this TV may have a label on the front of the product informing the customer of the energy
consumption in various operating modes.
“ON” - The energy consumption (W) of the set when operating with picture and sound (measured
according to IEC 62087:2002)
according to IEC 62087:2002)
“Standby” The energy consumption (W) of the set when in standby, no picture or sound (measured
according to IEC 62087:2002)
according to IEC 62087:2002)
An estimated annual energy consumption (kWh) based on a duty cycle of 4 hours “on” and 20 hours
in “standby” for 365 days
in “standby” for 365 days
Note: The IEC 62087:2002 measurement standard sets brightness and sound levels that may not be the same as the TV in
“shipped” condition. Therefore the power consumption as measured at “on” is purely indicative and may not be the same
value as in the “shipped” condition.
“shipped” condition. Therefore the power consumption as measured at “on” is purely indicative and may not be the same
value as in the “shipped” condition.
LC-26/32/37GA6E(E)_c
05.6.29, 7:50 AM
23
24
A. Information on Disposal for Users (private households)
1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for
the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local
collection facilities.
the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local
collection facilities.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal.
LC-26/32/37GA6E(E)_c
05.6.29, 7:50 AM
24
