DOWNLOAD Sharp LC-37D44EBK (serv.man11) Service Manual ↓ Size: 4.26 MB | Pages: 40 in PDF or view online for FREE

o LCD COLOUR TV, Model: LC-37D44E, LC-37D44S

LCD panel

37

o Advanced Super View & BLACK TFT LCD

Resolution

1,049,088 pixels (1,366 

g 768)

Video Colour System

PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60

TV 
Function

TV-Standard

Analogue

CCIR (B/G, I, D/K, L, L’)

Digital

DVB-T (2K/8K OFDM)

Receiving 
Channel

VHF/UHF

E2–E69ch, F2–F10ch, I21–I69ch, IR A–IR Jch, (Digital: E5–E69ch)

CATV

Hyper-band, S1–S41ch

TV-Tuning System

Auto Preset 999 ch: non-Nordic / 9999 ch: Nordic (ATV: 99 ch), Auto Label, Auto Sort

STEREO/BILINGUAL

NICAM/A2

Brightness

450 cd/m

2

 (in Dynamic Mode)

Backlight life

60,000 hours (in Standard Mode)

Viewing angles

H : 176°  V : 176°

Audio amplifier

10W 

g 2

Speaker

(100 mm 

g 35 mm) g 2

Terminals

Antenna

UHF/VHF 75

q Din type (Analogue & Digital)

RS-232C

9 pin mini D-sub

EXT 1

SCART (AV input, Y/C input, RGB input, TV output)

EXT 2

SCART (AV input/output, Y/C input, RGB input, AV Link)

EXT 3

S-VIDEO (Y/C input), RCA pin (AV input)

EXT 4

Ø 3.5 mm jack (Audio input), 15 pin mini D-sub (PC)

EXT 5

Audio in, Component in

EXT 6

HDMI, Ø 3.5 mm jack (Audio input)

EXT 7

HDMI

C. I. (Common Interface)

EN50221, R206001

OUTPUT

RCA pin  (Audio)

Headphones

Ø 3.5 mm jack (Audio output)

Power Requirement

AC 220–240 V, 50 Hz

Power Consumption

146 W (0.9 W Standby) (Method IEC60107)

Weight

14.5 kg (Display only), 17.0 kg (Display with stand)

Operating temperature

0°C to 

k40°C

•  As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for 

product improvement without prior notice. The performance specification figures indicated are nominal values of production 
units. There may be some deviations from these values in individual units.

NOTE
•  Refer to inside back cover for dimensional drawings.

The listed optional accessories are available for the 
LCD colour TV. Please purchase them at your nearest 
shop.

•  Additional optional accessories may be available in near 

future. When purchasing, please read the newest catalogue 
for compatibility and check the availability.

Wall mount bracket 
(LC-37D44E, LC-37D44S)

AN-37AG5

LC-37D44E-gb.indd   35

LC-37D44E-gb.indd   35

2008/06/16   13:38:52

2008/06/16   13:38:52

Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! 

Used electrical and electronic equipment must be treated separately and in accordance with legislation that 
requires proper treatment, recovery and recycling of used electrical and electronic equipment. 
Following the implementation by member states, private households within the EU states may return their used 
electrical and electronic equipment to designated collection facilities free of charge*.  In some countries* your 
local retailer may also take back your old product free of charge if you purchase a similar new one. 
*) Please contact your local authority for further details.

If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately 
beforehand according to local requirements.

By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, 
recovery and recycling and thus prevent potential negative effects on the environment and human health which 
could otherwise arise due to inappropriate waste handling.

If you wish to discard this product, please contact your local authorities and ask for the correct method of 
disposal.  

For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you 
don’t purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.
sens.ch.

If the product is used for business purposes and you want to discard it:

Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged 
for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by 
your local collection facilities.

For Spain: Please contact the established collection system or your local authority for take-back of your used 
products.

If you wish to discard of this product, please contact your local authorities and ask for the correct method of 
disposal.

Attention: Your product 
is marked with this 
symbol. It means that 
used electrical and 
electronic products 
should not be mixed 
with general household 
waste. There is a 
separate collection 
system for these 
products.

The battery supplied with this product contains traces of Lead.

For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household 
waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in 
accordance with legislation. Please contact your local authority for details on the collection and recycling 
schemes.

For Switzerland: The used battery is to be returned to the selling point.

For other non-EU countries: Please contact your local authority for correct method of disposal of the used battery.

LC-37D44E-gb.indd   36

LC-37D44E-gb.indd   36

2008/06/16   13:38:52

2008/06/16   13:38:52

200,0

200.0

200,0

200.0

100,0

100.0

  465,0

  465.0

270,0

270.0

95,3

95.3

89,6

89.6

  903,8

  903.8

52,0

52.0

 

585,0

 

585.0

637,0

637.0

824,4

824.4

463,8

463.8

 

366,9

 

366.9

The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the 
fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked 

 or 

)5)

 and of the same rating as above, 

which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains 
plug and fit an appropriate type.

The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a 
safe manner. 
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric 
shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:

The wires in the mains lead are coloured in accordance with the following code:

As the colours of the wires in the mains lead of this product may not correspond with the coloured markings 
identifying the terminals in your plug, proceed as follows:
•  The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
•  The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.
Before replacing the plug cover make sure that:
•  If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
•  The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

Printed in Poland
Gedruckt in Polen
Imprimé en Pologne
Stampato in Polonia
Gedrukt in Polen
Impreso en Polonia
Impresso na Polónia

OPERATION MANUAL

BEDIENUNGSANLEITUNG

MODE D’EMPLOI

MANUALE DI ISTRUZIONI

GEBRUIKSAANWIJZING

MANUAL DE MANEJO

MANUAL DE OPERAÇÃO

TINS-D792WJZZ

08P07-PL-NG

Printed on environmentally friendly paper
Auf ökologischem Papier gedruckt
Imprimé sur papier écologique
Stampato su carta ecologica
Afgedrukt op ecologisch papier
Impreso en papel ecológico
Impresso sobre papel ecológico

SHARP ELECTRONICS (Europe) GmbH

Sonninstraße 3, D-20097 Hamburg

SHARP CORPORATION

ENGLISH

DEUTSCH

FRANÇAIS

IT

ALIANO

NEDERLANDS

ESP

AÑOL

POR

TUGUÊS