Sharp LC-37D44EBK (serv.man11) User Manual / Operation Manual ▷ View online
Menu operations
Surround
Menu Operation: A (page 12)
Surround function allows you to enjoy realistic “live”
sound.
Surround function allows you to enjoy realistic “live”
sound.
NOTE
• You can also choose surround effects by pressing
• You can also choose surround effects by pressing
SURROUND on the remote control unit.
Auto Vol.
Menu Operation: A (page 12)
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. The Automatic Volume
Control (Auto Vol.) solves this problem and equalises
the volume levels.
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. The Automatic Volume
Control (Auto Vol.) solves this problem and equalises
the volume levels.
Clear Voice
Menu Operation: A (page 12)
This function emphasises speech voice against the
background noise for more intelligibility. It is not
recommended for music sources.
This function emphasises speech voice against the
background noise for more intelligibility. It is not
recommended for music sources.
Power Control menu
MENU
[Power Control]
Power Control
No Signal Off
No Operation Off
[Disable]
[Disable]
Setup
No Signal Off
Menu Operation: A (page 12)
When set to “Enable” the TV will automatically enter the
standby mode if there is no signal input for 15 minutes.
When set to “Enable” the TV will automatically enter the
standby mode if there is no signal input for 15 minutes.
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
NOTE
• When a TV programme finishes, this function may not
• When a TV programme finishes, this function may not
operate.
• This function is not available in DTV mode.
No Operation Off
Menu Operation: A (page 12)
When set to “Enable” the TV will automatically enter
the standby mode if no operations are performed for 3
hours.
When set to “Enable” the TV will automatically enter
the standby mode if no operations are performed for 3
hours.
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
Power Management
Menu Operation: A (page 12)
When set, the TV will automatically enter the standby
mode.
When set, the TV will automatically enter the standby
mode.
Off:
• No power management.
• Factory preset value.
Mode1: • If there is no signal input for 8 minutes, the
TV enters the standby mode.
• Even if you start using the PC and the
signal inputs again, the TV stays in standby
mode.
mode.
• The TV turns on again by pressing
a on
the TV or
B on the remote control unit.
(See page 8.)
Mode2: • If there is no signal input for 8 seconds, the
TV enters the standby mode.
• When you start using the PC and the signal
inputs again, the TV turns on.
• The TV turns on again by pressing
a on
the TV or
B on the remote control unit.
(See page 8.)
Setup menu
MENU
[Setup]
Setup
Option
Child Lock
Auto Installation
Programme Setup
Position
WSS
4:3 Mode
[Panorama]
[On]
[Off (0V)]
Supply Voltage
[English]
Language
Auto Installation
You can run Auto Installation again, even after setting
up the preset channels.
up the preset channels.
Press MENU and the MENU screen displays.
Press
c/d to select “Setup”.
Press
a/b to select “Auto Installation”, and
then press OK.
If you have already set the PIN under “Child
Lock”, enter it here.
Lock”, enter it here.
• See page 17 for setting PIN.
Press
c/d to select “Yes”, and then press OK.
You can set language and country the same
as in the Initial auto installation (Analogue).
Follow steps 1 and 2 on page 8.
as in the Initial auto installation (Analogue).
Follow steps 1 and 2 on page 8.
1
2
3
2
3
4
5
5
15
Item
TV/DTV/AV only
TV/AV only
TV/DTV/AV only
PC only
TV only
LC-37D44E-gb.indd 15
LC-37D44E-gb.indd 15
2008/06/16 13:38:25
2008/06/16 13:38:25
Menu operations
Programme Setup
This section describes how to set up analogue TV
channels manually.
channels manually.
Press MENU and the MENU screen displays.
Press
c/d to select “Setup”.
Press
a/b to select “Programme Setup”, and
then press OK.
If you have already set the PIN under “Child
Lock”, enter it here.
Lock”, enter it here.
• See page 17 for setting PIN.
Press
a/b to select “Auto Search”, “Manual
Adjust”, “Sort” or “Erase Programme”, and then
press OK.
press OK.
Auto Search
Manual Adjust
Sort
Erase Programme
No
Yes
Auto Search
You can automatically search for and download TV
channels by performing the procedure below. This is
the same function as from programme auto search to
preset download in Auto Installation.
channels by performing the procedure below. This is
the same function as from programme auto search to
preset download in Auto Installation.
Repeat steps 1 to 4 in Programme Setup.
Press
c/d to select “Yes”, and then press OK.
1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download
Manual Adjust
You can set some channel items manually.
MENU
[Setup ... Programme Setup]
Fine
Colour sys.
Sound sys.
Label
Skip
Decoder
Lock
[179.25]
[AUTO]
[B/G]
[Off]
[SAT.1]
[Off]
[Off]
179.25
MHz
Repeat steps 1 to 4 in Programme Setup.
Press
c/d to select “Yes”, and then press OK.
Press
a/b/c/d to select the channel you
want to edit, and then press OK.
• The selected channel information displays.
1
2
3
2
3
4
1
2
2
1
2
3
2
3
Press
a/b to select the desired menu item,
and then press OK.
Press
a/b/c/d to select or adjust.
NOTE
• When you exit Programme Setup “Manual Adjust”
• When you exit Programme Setup “Manual Adjust”
menu, preset download automatically runs if you change
information on that menu.
information on that menu.
4
5
You can adjust the frequency to your desired position.
NOTE
• Adjust while checking the background picture as a
• Adjust while checking the background picture as a
reference.
• Instead of pressing
c/d to adjust the frequency in step
5 above, you can set by directly entering the frequency
number of the channel with 0 – 9.
number of the channel with 0 – 9.
EXAMPLE
• 179.25 MHz: Press 1
• 179.25 MHz: Press 1
s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4
s 9 s 2 s 5 s OK.
Select the optimum colour systems to receive. (AUTO,
PAL, SECAM)
PAL, SECAM)
Select the optimum sound systems (Broadcasting
systems) to receive. (B/G, D/K, I, L, L’)
systems) to receive. (B/G, D/K, I, L, L’)
When a TV channel sends its Network Name, the Auto
Installation detects the information and assigns a name
to it. However, you can change individual channel
names.
Installation detects the information and assigns a name
to it. However, you can change individual channel
names.
Repeat steps 1 to 4 in Manual Adjust.
Press
a/b/c/d to select each character of
the new name for the channel, and then press
OK.
OK.
Repeat step 2 above until the name is fully spelt
out.
out.
• The name can be 5 characters or less.
• If a channel name is less than 5 characters, select
• If a channel name is less than 5 characters, select
“END”, then press OK.
1
2
2
3
Channels with “Skip” set to “On” are passed over when
using P (
using P (
r/s) even if selected while watching the
image from the TV.
When connecting a decoder to the unit, you need to
select EXT1.
select EXT1.
NOTE
• “Off” is factory preset value.
• “Off” is factory preset value.
16
Fine
Colour sys.
Sound sys. (Broadcasting system)
Label
Skip
Decoder
TV only
LC-37D44E-gb.indd 16
LC-37D44E-gb.indd 16
2008/06/16 13:38:26
2008/06/16 13:38:26
You can block the viewing of any channel.
NOTE
• See “Child Lock” for setting PIN.
• When Lock is set to “On” for a channel, “Child lock has
• See “Child Lock” for setting PIN.
• When Lock is set to “On” for a channel, “Child lock has
been activated.” displays, and the image and sound of the
channel are blocked.
channel are blocked.
• When pressing OK while “Child lock has been activated.”
displays, PIN input menu will display. Inputting the correct
PIN lifts the child lock temporarily until the power is turned
off.
PIN lifts the child lock temporarily until the power is turned
off.
Sort
Channel positions can be sorted freely.
Repeat steps 1 to 4 in Programme Setup.
Press
c/d to select “Yes”, and then press OK.
Press
a/b/c/d to select the channel you
want to move, and then press OK.
Press
a/b/c/d to move it to the desired
position, and then press OK.
Repeat steps 3 and 4 until all desired channels
are sorted.
are sorted.
Erase Programme
An individual programme can be erased.
Repeat steps 1 to 4 in Programme Setup.
Press
c/d to select “Yes”, and then press
OK.
Press
a/b/c/d to select the channel you
want to erase, and then press OK.
• A message screen pops up.
Press
c/d to select “Yes”, and then press
OK to erase the selected programme. All the
subsequent programmes move up.
subsequent programmes move up.
Repeat steps 3 and 4 until all desired channels
are erased.
are erased.
Child Lock
Allow you to use a PIN to protect certain settings from
being accidentally changed.
being accidentally changed.
Changing the PIN
Press MENU and the MENU screen displays.
Press
c/d to select “Setup”.
Press
a/b to select “Child Lock”, and then
press OK.
New PIN
–
–
–
Reconfirm
–
–
–
–
–
Change PIN
Reset
1
2
3
2
3
4
5
1
2
2
3
4
5
1
2
3
2
3
Menu operations
Enter the 4-digit number as a PIN using 0 – 9.
Enter the same 4-digit number as in step 4 to
confirm.
confirm.
• “The system PIN has been changed successfully”
displays.
NOTE
• To view a locked channel, you must enter a PIN. (See this
• To view a locked channel, you must enter a PIN. (See this
page and page 27 for locking channels from viewing in
analogue TV and DTV mode.) When you select a locked
channel, a PIN prompt message pops up. Press OK to
display the PIN input window.
analogue TV and DTV mode.) When you select a locked
channel, a PIN prompt message pops up. Press OK to
display the PIN input window.
Resetting the PIN
Allow you to reset your PIN to the factory preset
“1234”.
“1234”.
Repeat steps 1 to 3 in Changing the PIN.
Enter the PIN.
Press
a/b to select “Reset”, and then press
OK.
Press
c/d to select “Yes”, and then press OK.
NOTE
• As a precautionary measure, make a note of your PIN
• As a precautionary measure, make a note of your PIN
on the back of this operation manual, cut it out and
keep it in a safe place that children cannot reach.
keep it in a safe place that children cannot reach.
• See page 32 for resetting the current PIN to the
factory preset “1234” if you lose or forget your PIN.
Input Label
You can assign each input source a label you like.
Press
b to select the desired input source.
Press MENU and the MENU screen displays.
Press
c/d to select “Setup”.
Press
a/b to select “Input Label”, and then
press OK.
Press
a/b/c/d to select each character of
the new name for the input source, and then
press OK.
press OK.
Repeat step 5 above until the name is fully spelt
out, and then press OK.
out, and then press OK.
• The name can be 6 characters or less.
• If a label name is less than 6 characters, select
• If a label name is less than 6 characters, select
“END”, then press OK.
NOTE
• You cannot change the label if the input source is TV or
• You cannot change the label if the input source is TV or
DTV.
4
5
5
1
2
3
2
3
4
1
2
3
4
2
3
4
5
6
17
Lock
TV only
LC-37D44E-gb.indd 17
LC-37D44E-gb.indd 17
2008/06/16 13:38:26
2008/06/16 13:38:26
Menu operations
H-Pos.: Centres the image by moving it to the left or
right.
V-Pos.: Centres the image by moving it up or down.
NOTE
• Adjustments are stored separately according to input
• Adjustments are stored separately according to input
source.
• Depending on the input signal type a position setting may
not be available.
WSS (Wide Screen Signalling)
Menu Operation: A (page 12)
WSS allows a television to switch automatically among
the different screen formats.
WSS allows a television to switch automatically among
the different screen formats.
NOTE
• Use WIDE MODE if an image does not switch to the
• Use WIDE MODE if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled. (See page 20.)
no WSS information, the function will not work even if
enabled. (See page 20.)
4:3 Mode
Menu Operation: A (page 12)
The WSS signal has 4:3 auto-switching that allows you
to select between Normal and Panorama.
The WSS signal has 4:3 auto-switching that allows you
to select between Normal and Panorama.
Normal: Normal range keeping 4:3 or 16:9 aspect ratio
Panorama: Wide image without side bars
Panorama: Wide image without side bars
WSS signal 4:3 screen
4:3 mode “Panorama”
4:3 mode “Normal”
Language
Menu Operation: A (page 12)
You can select a language from the Setup menu.
Select desired language listed on the screen.
You can select a language from the Setup menu.
Select desired language listed on the screen.
Supply Voltage
Menu Operation: A (page 12)
Switch on or off the power to the antenna connected
to the antenna input terminal. (See page 4.)
Switch on or off the power to the antenna connected
to the antenna input terminal. (See page 4.)
Option menu
MENU
[Option]
Option
Audio Only
DNR
Input Select
Colour System
[Off]
[CVBS]
[AUTO]
NOTE
• “HDMI Setup” is displayed only when “EXT6” or “EXT7” is
• “HDMI Setup” is displayed only when “EXT6” or “EXT7” is
selected from the INPUT SOURCE menu.
Audio Only
Menu Operation: A (page 12)
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
Off: Both screen images and audio are output.
On: Audio is output without screen image.
On: Audio is output without screen image.
Fine Sync.
Menu Operation: C (page 12)
Ordinarily, the TV automatically adjusts image positions
coming from PC (Auto Sync. function). In some cases,
however, manual adjustment is needed to optimise the
image.
Ordinarily, the TV automatically adjusts image positions
coming from PC (Auto Sync. function). In some cases,
however, manual adjustment is needed to optimise the
image.
H-Pos.: Centres the image by moving it to the left or
right.
V-Pos.: Centres the image by moving it up or down.
Clock: Adjusts when the image flickers with vertical
Clock: Adjusts when the image flickers with vertical
stripes.
Phase: Adjusts when characters have low contrast or
when the image flickers.
NOTE
• If you need to adjust the image position, adjust the position
• If you need to adjust the image position, adjust the position
using your PC.
Item
Position
Menu Operation: C (page 12)
For adjusting a picture’s horizontal and vertical position.
For adjusting a picture’s horizontal and vertical position.
XGA Mode
Menu Operation: C (page 12)
You can select one of the 3 input signals listed below
to adjust the picture resolution when the PC input is an
XGA signal.
You can select one of the 3 input signals listed below
to adjust the picture resolution when the PC input is an
XGA signal.
1024
g 768
1280
g 768
1360
g 768
NOTE
• Depending on the graphics card, resolutions of 1360
• Depending on the graphics card, resolutions of 1360
g
768 may not display correctly.
18
Item
Item
Item
PC only
PC only
TV/DTV/AV only
TV/DTV/AV only
TV/DTV/AV only
TV/DTV/AV only
LC-37D44E-gb.indd 18
LC-37D44E-gb.indd 18
2008/06/16 13:38:27
2008/06/16 13:38:27
Click on the first or last page to see other LC-37D44EBK (serv.man11) service manuals if exist.