Sharp LC-32SH330E Service Manual ▷ View online
2008-03-14
LC-26SH330, LC-32SH330, LC-42SH330
5
[2] OPERATION MANUAL
Remote control unit
(POWER)
Press to turn the LCD TV on or enter standby mode.
(SOURCE)
Select an input source.
0-9 DIGIT BUTTONS
To select a TV channel directly.
EPG
Press this button to display electronic program guide
when watching digital channels。
when watching digital channels。
PRE CH
To display the previous selected TV channel.
DTV/ATV
Press this button to switch between ATV and DTV
channels。
channels。
PR LIST
Press to display a list of channels. Then press Red
Button to select the digital or analogue channel
list.(Only available when your input source is TV).
Button to select the digital or analogue channel
list.(Only available when your input source is TV).
ECO
Press this button to set the picture with less bightless
for saving energy.
for saving energy.
Display programme infomation, if available.
(+/-)
Press to adjust the volume.
Press to toggle audio on and off. You can also press
(+/-) to restore the previous volume level.
(Picture format)
Select picture format to Auto / Normal / Zoom 1/
Zoom 2 / Wide.
Zoom 2 / Wide.
P (∧/∨)
Press to select the channel.
DUAL
Select MONO / STEREO / DUAL 1 / DUAL 2 for ATV
channel. Select Audio language for DTV channel.
channel. Select Audio language for DTV channel.
AUDIO (ADJ)
Press to set the LCD TV to a predefined sound setting.
Personal / Music / Speech
Personal / Music / Speech
VIDEO (ADJ)
Press to set the LCD TV to a predefined picture
setting. Personal / Standard / Vivid / Movie / Eco
setting. Personal / Standard / Vivid / Movie / Eco
SLEEP
Press to turn the LCD TV off within an amount of time.
(10 ~ 120 minutes.)
(10 ~ 120 minutes.)
∧∨﹤﹥
Press ∧∨<> to navigate and confirm your selection.
OK
Press to activate a setting.
MENU
Press to activate the LCD TV OSD.
.
.
EXIT
Press again to exit the LCD TV OSD or returen to the
previous layer.
previous layer.
R/G/Y/B (COLOUR BUTTON)
Press buttons to select the pictures with various
colours of text. Different channels display different
functions.
colours of text. Different channels display different
functions.
TELETEXT
Press this button to activate Teletext. Press again to
activate Teletext with TV. Press again to turn off
Teletext.
activate Teletext with TV. Press again to turn off
Teletext.
SUBTITLE
For DTV, press this button to toggle off / between
available subtitle language.
For ATV, press this button to toggle off / between
available subtitle pages in Teletext.
available subtitle language.
For ATV, press this button to toggle off / between
available subtitle pages in Teletext.
SIZE
Press this button to change the font size: Full screen,
Top half and Bottom half.
Top half and Bottom half.
SUBPAGE
To select the subpage when the current page contains
subpage(s).
subpage(s).
INDEX
Press this button to return to page 100 or the index
page; and then press 0 to 9. The teletext page will be
numbered and added to the page you select or the
secondary item.
page; and then press 0 to 9. The teletext page will be
numbered and added to the page you select or the
secondary item.
HOLD
Press this button to stop the scrolling of pages.
The text decoder stops receiving data.
The text decoder stops receiving data.
REVEAL
Reveal hidden information such as answers to a quiz.
FREEZE
Press to freeze a moving image on the screen (Only
available when your input source is TV). Scart output
signal will also be frozen when you are watching digital
channels.
available when your input source is TV). Scart output
signal will also be frozen when you are watching digital
channels.
In USB mode
(You need to programme the setting with remote control
to control connected devices.)
to control connected devices.)
Press to skip back to the previous title or track.
Press to stop playback.
Press to start / pause playback. Caution: Do not freeze
the video image for long periods of time. You may
damage the TV screen.
the video image for long periods of time. You may
damage the TV screen.
Press to skip forward to the next title or track.
LC-26SH330, LC-32SH330, LC-42SH330
6
TV (Front view)
TV (Rear view)
2008-03-14
LC-26SH330, LC-32SH330, LC-42SH330
7
Preparation
Mount the TV base
1.
Put the TV face down on a safe surface
that is covered by a soft and smooth cloth.
2. Adjust the TV stand to the bottom of the TV.
3. Fasten the screws by using a cross-head screwdriver. (Not supplied).
NOTE:
• To detach the TV stand, perform the steps in reverse order.
Wall mounting
TV screen size
(Inches)
(Inches)
VESA-compatible wall bracket
(millimeters) (W x H)
(millimeters) (W x H)
Screw type
26”
200 x 100 mm
Metric 4 x 10 mm
32”
200 x 200 mm
Metric 6 x 10 mm
42”
400 x 200 mm
Metric 6 x 10 mm
NOTE:
• At the time of purchasing wall bracket , please check if there is enough space between the wall bracket and
TV terminals for the terminal connection.
.
LC-26SH330, LC-32SH330, LC-42SH330
8
preparation
Installation of batteries
1.
insert two AAA batteries into Remote control.
Make sure (+) and (-) are facing the proper
direction.
Make sure (+) and (-) are facing the proper
direction.
2. Replace the cover.
NOTE
• If the remote control will not to be used for a long
• If the remote control will not to be used for a long
time, remove the batteries to avoid remote control damage.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find
any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
Using the remote control unit
Use the remote control unit by pointing it towards the
remote control sensor. Objects between the remote
control unit and sensor may prevent proper operation.
remote control sensor. Objects between the remote
control unit and sensor may prevent proper operation.
Click on the first or last page to see other LC-32SH330E service manuals if exist.