Sharp LC-32SH330E Service Manual ▷ View online
2008-03-14
LC-26SH330, LC-32SH330, LC-42SH330
17
Fig.22
2. Remove the 4 screws. Detach the Neck as Fig.22
Step 2. Remove the REAR COVER Assy.
1. Remove the 13 screws. Detach the
REAR COVER
as Fig.23.
Fig.23
Step 3. Remove the RS232, Main, Power board and the Speakers.
Fig.24
1. Disconnect 5 cables and remove the 8 screws. Detach the Main, RS232 board as Fig.25 and Fig.26.
LC-26SH330, LC-32SH330, LC-42SH330
18
Fig.25
Fig.26
2. Disconnect 1 cable and remove the 5 screws. Detach the Power board as Fig.27.
Fig.27
3. Remove the 4 screws. Detach the Speakers as Fig.28.
Fig.28
Step 4. Remove the Bracket and Bezel.
1.
Remove the 9 screws. Detach the Bracket as Fig.29.
Fig.29
2.
Remove the 4 screws. Detach the Bezel as Fig.30.
2008-03-14
LC-26SH330, LC-32SH330, LC-42SH330
19
Panel:
Fig.30
Step 5. Remove the IR and Key board.
1. Remove the 2 screws and disconnect 1 cable. Detach the IR board as Fig.31.
Fig.31
2. Remove the 2 screws and disconnect 1 cable. Detach the Key board as Fig.32.
Fig.32
2. Set Re-assembly
To re-assemble the whole set, execute all processes in reverse order.
Notes:
a. While re-assembling, make sure that all cables are placed and connected in their original position.
LC-26SH330, LC-32SH330, LC-42SH330
20
b. Pay special attention not to damage the EMC foams at the SSB shielding. Check that EMC foams are put
correctly on their places.
Click on the first or last page to see other LC-32SH330E service manuals if exist.