Sharp LC-32SH330E Service Manual ▷ View online
2008-03-14
LC-26SH330, LC-32SH330, LC-42SH330
13
Fig.7
2. Disconnect 1 cable and remove the 5 screws. Detach the Power board as Fig.8.
Fig.8
3. Remove the 4 screws. Detach the Speakers as Fig.9.
Fig.9
Step 4. Remove the Bracket and Bezel.
1. Remove the 10 screws. Detach the Bracket as Fig.10 and Fig.11.
Fig.10
Fig.11
LC-26SH330, LC-32SH330, LC-42SH330
14
2. Remove the 4 screws. Detach the Bezel as Fig.12.
Fig.12
Panel:
Fig.13
Remove the other end of FFC cable as Fig14 and Fig15.
Fig14
Fig15
Panel:
Please open the black cover as Fig15
2008-03-14
LC-26SH330, LC-32SH330, LC-42SH330
15
Fig16
Step 5. Remove the IR and Key board.
1. Remove the 2 screws and disconnect 1 cable. Detach the IR board as Fig.17.
Fig.17
2. Remove the 2 screws and disconnect 1 cable. Detach the Key board as Fig.18.
Fig.18
2. Set Re-assembly
To re-assemble the whole set, execute all processes in reverse order.
Notes:
a. While re-assembling, make sure that all cables are placed and connected in their original position.
b. Pay special attention not to damage the EMC foams at the SSB shielding. Check that EMC foams are put
correctly on their places.
LC-26SH330, LC-32SH330, LC-42SH330
16
REMOVING OF MAJOR PARTS(LC-32SH330)
1. Assy/Panel Removal
Notes: Please put your machine on soft material to avoid to scrape panel when you disassemble it.
Front view
Fig.19
Back view
Fig.20
Step 1. Remove the Base Assy.
1. Remove the base as Fig.21.
Remove the 4 screws as Fig.21 and pull out the base as Fig.22
Fig.21
Click on the first or last page to see other LC-32SH330E service manuals if exist.