DOWNLOAD Sharp LC-30HV4E (serv.man2) Service Manual ↓ Size: 16.95 MB | Pages: 127 in PDF or view online for FREE

1. Remove the five top panel retaining screws and slide the top panel backward to remove it.
2. Remove the four side panel retaining screws on both the right and left sides and slide the side panels

backward to remove them.

3. Remove the three front panel retaining screws and remove the front panel.
4. Remove the five bottom panel retaining screws and slide the bottom panel backward to remove it.
5. Remove the four screws securing the main PWB angle and remove the angle upward.
6. Remove the four screws securing the main PWB to the angle and remove the main PWB.

Ë 

Ë 

Ë 

Ë 

Ë 

Top panel

Side panel, left

Side panel, right

2

2

1

1

1

3

3

4

4

4

Front panel

Bottom panel

Main PWB angle

6

5

Main PWB

7. Remove the system/control terminal retaining:

7-1. Remove the four hex head screws securing the terminals of the system and control cables (white).
7-2. Remove the two screws securing the terminal of the system cable (gray).
7-3. Remove the rear chassis retaining screw.

8. Remove the PC I/F and SR units:

8-1. Remove the four PC I/F unit shield retaining screws and remove the shield.
8-2. Remove the six PC I/F unit retaining screws and remove the I/F unit.
8-3. Remove the two PC I/F unit angle retaining screws and remove the angle.
8-4. Remove the two SR unit retaining screws and remove the SR unit.

9. Remove the rear chassis:

9-1. Remove the two tuner nuts and washers.
9-1. Remove the 13 rear chassis retaining screws and remove the rear chassis.

10. Remove the three power supply board retaining screws and remove the power supply board.

8-1

8-2

8-3

8-4

7-1

7-3

7-2

PC I/F unit shield

PC I/F unit

PC I/F unit angle

SR unit

Rear chassis

9-2

9-1

10

Power unit