Sharp LC-30HV2E (serv.man24) User Manual / Operation Manual ▷ View online
36
Basic adjustment settings
ENTER
MENU
/
MENU
Power control
No Operation off
[Enable]
Disable
Enable
No operation off
When set to “Enable”, the power will automatically shut
down if the signal stays inactive for 3 hours.
When set to “Enable”, the power will automatically shut
down if the signal stays inactive for 3 hours.
1
Press MENU.
2
Press a/b to select “Power control”, and then
press ENTER.
press ENTER.
3
Press a/b to select “No Operation off”, and then
press ENTER.
press ENTER.
4
Press a/b to select “Enable”, and then press
ENTER.
ENTER.
5
Press MENU to exit the menu.
• Five minutes before the power shuts down, a hazard
warning will display every minute.
A
• “Disable” is factory preset value.
• Return to the previous menu by pressing RETURN.
• “Disable” is factory preset value.
• Return to the previous menu by pressing RETURN.
37
MENU
Power Control
Power Management
[Off]
Off
Mode2
Mode1
MENU
Power Control
Power Save
[Save1]
Standard
Save1
Save2
Auto
Basic adjustment settings
Power management
When set, the power will automatically shut down.
When set, the power will automatically shut down.
1
Press MENU.
2
Press a/b to select “Power Control”, and then
press ENTER.
press ENTER.
3
Press a/b to select “Power Management”, and
then press ENTER.
then press ENTER.
4
Press a/b to select “Mode1” or “Mode2”, and then
press ENTER.
press ENTER.
5
Press MENU to exit the menu.
A
• Return to the previous menu by pressing RETURN.
• Return to the previous menu by pressing RETURN.
Description
• No power management
• Factory preset value.
• Factory preset value.
• If no signal inputs for 8 minutes, the power
shuts down.
• Even if you start using the computer and
the signal inputs again, the System stays
off.
off.
• The System turns on again by pressing
STANDBY/ON button on the Display or B
on the remote control unit. (See page 12.)
on the remote control unit. (See page 12.)
• If no signal inputs for 8 seconds, the power
shuts down.
• When you start using the computer and the
signal inputs again, the System turns on.
Selected item
Off
Mode1
Mode2
ENTER
MENU
/
Power control for PC source
Power control allows you to reduce display brightness
and save energy.
and save energy.
Power save
1
Press MENU.
2
Press a/b to select “Power Control”, and then
press ENTER.
press ENTER.
3
Press a/b to select “Power Save”, and then press
ENTER.
ENTER.
4
Press a/b to select the desired mode, and then
press ENTER.
press ENTER.
5
Press MENU to exit the menu.
A
• “Standard” is factory preset value.
• Return to the previous menu by pressing RETURN.
• “Standard” is factory preset value.
• Return to the previous menu by pressing RETURN.
38
Using external equipment
P
B
(C
B
)
COMPONENT
P
R
(C
R
)
Y
R - AUDIO - L
INPUT 3
INPUT 2
INPUT 1
RS-232C
DISPLAY OUTPUT1
DISPLAY OUTPUT2
AC INPUT
220–240V
220–240V
AV OUTPUT
S-VIDEO
VIDEO
AC INPUT
110V–240V
110V–240V
DISPLAY INPUT2
DISPLAY INPUT1
Display
(rear view)
(rear view)
DVD player
AVC System
(rear view)
(rear view)
AVC System
(front view)
(front view)
AV Receiver
(Built-in Tuner Amp)
(Built-in Tuner Amp)
VCR
Decoder
Game console/Camcorder
Computer
You can connect many types of external equipment to your System, like a decoder, VCR, DVD player, computer,
game console and camcorder. To view external source images, select the input source from b on the remote
control unit or INPUT on the Display.
game console and camcorder. To view external source images, select the input source from b on the remote
control unit or INPUT on the Display.
L
• To protect all equipment, always turn off the AVC System before connecting to a decoder, VCR, DVD player, computer,
game console, camcorder or other external equipment.
• The S-video signal only outputs when “Input 2” or “Input 3” is selected for “Y/C”, or when from the INPUT 4 terminal (S-
VIDEO). Only the S-video signal can output from the INPUT 4 terminal (S-VIDEO).
A
• Please refer to the relevant operation manual (DVD player, computer, etc.) carefully before making connections.
• Please refer to the relevant operation manual (DVD player, computer, etc.) carefully before making connections.
39
Using external equipment
Option
MENU
Input Select
Input1
[AV]
RGB
AV
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
P
B
(C
B
)
COMPONENT
P
R
(C
R
)
Y
R - AUDIO - L
INPUT 3
INPUT 2
INPUT 1
RS-232C
DISPLAY OUTPUT1
DISPLAY OUTPUT2
AC INPUT
220–240V
220–240V
AV OUTPUT
S-VIDEO
VIDEO
AVC System (rear view)
Decoder
SCART cable
(commercially available)
(commercially available)
Watching a decoder image
Connecting a decoder
You can use the INPUT 1 terminal when connecting a decoder and other audiovisual equipment.
Displaying a programme
When connecting to the INPUT 1 terminal, select “Input
1” on “Input Select” in the menu to set the correct input
signal type. (See page 49.)
1” on “Input Select” in the menu to set the correct input
signal type. (See page 49.)
The setting is stored and can be selected on the
“INPUT SOURCE” menu.
“INPUT SOURCE” menu.
To watch a decoder image, select “INPUT1” from the
“INPUT SOURCE” menu using b on the remote
control unit or INPUT on the Display. (See page 49.)
“INPUT SOURCE” menu using b on the remote
control unit or INPUT on the Display. (See page 49.)
A
• Each time b is pressed, the input source toggles.
• If the decoder image does not come in clearly, you may
• If the decoder image does not come in clearly, you may
need to change the input signal type setting on the “Input
Select” menu.
Select” menu.
• It is recommended to connect to the INPUT 1 terminal
when using a decoder for ground wave signal input. If
INPUT 1 signals preset in auto installation or programme
setup, make sure to set “Decoder” to “INPUT1” in the
Programme Setup “Manual” menu. (See page 27.)
INPUT 1 signals preset in auto installation or programme
setup, make sure to set “Decoder” to “INPUT1” in the
Programme Setup “Manual” menu. (See page 27.)
• Refer to your decoder operation manual for the signal type.
Click on the first or last page to see other LC-30HV2E (serv.man24) service manuals if exist.