Sharp LC-30HV2E (serv.man23) User Manual / Operation Manual ▷ View online
68
Dimensional drawings
DISPLAY OUTPUT-2
DISPLAY OUTPUT-1
AC INPUT
110V–240V
497
304.5
101
598
354
1002.4
766.4
545
84.5
304.5
Unit: mm
Display
69
Dimensional drawings
430
326
70
47.5
235
330
10
8
23
Unit: mm
AVC System
70
HOW TO SET THE FACTORY PRESETS
Press and hold down CLEAR on the AVC System while it is in standby mode. Then press STANDBY/ON
button on the Display or B on the remote control unit to turn the System on.
All setting items (except TV channel) return to the factory presetting.
button on the Display or B on the remote control unit to turn the System on.
All setting items (except TV channel) return to the factory presetting.
A
• Running the factory presetting operation also clears the password.
• Running the factory presetting operation also clears the password.
You can run the Auto Installation again by using the following steps.
1
Turn on the power of the Display and the AVC System.
2
Press MENU. (Make sure the menu screen displays.)
3
Press b to select “Setup”.
4
Press ENTER.
A
• If the password setting screen displays, you need to enter your password.
• If you forget your password, refer to HOW TO SET THE FACTORY PRESETS above.
• If the password setting screen displays, you need to enter your password.
• If you forget your password, refer to HOW TO SET THE FACTORY PRESETS above.
5
Press a/b to select “Auto Installation”.
6
Press ENTER.
“Auto Installation completed” displays. After that, the screen changes to the TV mode.
A
• As a precautionary measure, make a note of your password above, scissor it from this manual, and keep it in a familiar
• As a precautionary measure, make a note of your password above, scissor it from this manual, and keep it in a familiar
place.
The password is
.
Display
