Sharp LC-30HV2E (serv.man24) User Manual / Operation Manual ▷ View online
24
Basic adjustment settings
ENTER
MENU
/
Auto search
You can also automatically search and download TV
channels by performing the procedure below. This is
the same function as from programme auto search to
preset download in auto installation on pages 22 to
23.
channels by performing the procedure below. This is
the same function as from programme auto search to
preset download in auto installation on pages 22 to
23.
1
Press MENU.
2
Press a/b to select “Setup”, and then press
ENTER.
ENTER.
3
Press a/b to select “Programme Setup”, and then
press ENTER.
press ENTER.
4
Press a/b to select “Auto Search”, and then press
ENTER.
ENTER.
• Programme auto search starts as shown below.
1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download
1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download
A
• Return to the previous menu by pressing RETURN before
• Return to the previous menu by pressing RETURN before
programme auto search starts.
• See pages 22 to 23 for the details on the programme auto
search.
Programme setup
You can run the auto installation procedure again at any time, by accessing the Setup menu, then Programme
Setup. Channels can be turned automatically or manually.
Setup. Channels can be turned automatically or manually.
Manual setting for each channel
You can set some channel items manually. They are
Fine (TV frequency), Colour sys., Sound sys., Label
(Network name), Skip, Decoder and Lock (Child Lock).
Fine (TV frequency), Colour sys., Sound sys., Label
(Network name), Skip, Decoder and Lock (Child Lock).
1
Press MENU.
2
Press a/b to select “Setup”, and then press
ENTER.
ENTER.
3
Press a/b to select “Programme Setup”, and then
press ENTER.
press ENTER.
4
Press a/b to select “Manual Adjust”, and then
press ENTER.
press ENTER.
• Programme Setup “Manual” menu displays.
A
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
• When you exit Programme Setup “Manual” menu, preset
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
• When you exit Programme Setup “Manual” menu, preset
download automatically runs if you change information
on that menu.
on that menu.
Setup
MENU
Auto Installation
Programme Setup
Child Lock
RETURN
Setup
MENU
Programme Setup
Auto Search
Manual Adjust
RETURN
Sort
Programme Setup “Manual”
01
02
Fine
Colour sys.
Sound sys.
Label
Skip
Decoder
Lock
179.75MHz
AUTO
B/G
Off
SAT.1
Off
Off
03
04
05
06
07
08
09
11
12
10
13
14
15
16
17
18
19
21
22
20
23
24
25
26
27
28
29
31
32
30
33
34
35
36
37
38
39
41
42
40
43
44
45
46
47
48
49
[NEXT]
Please select channel to be edited.
SAT.1
PRO7
KABEL
Setup
MENU
Programme Setup
Auto Search
Manual Adjust
RETURN
Sort
Programme Setup “Manual” menu
25
Programme Setup “Manual”
01
02
Fine
196.25 MHz
SAT.1
PRO7
03
KABEL
Basic adjustment settings
Programme Setup “Manual”
01
02
Fine
Colour sys.
Sound sys.
Label
Skip
Decoder
Lock
179.75MHz
AUTO
B/G
Off
SAT.1
Off
Off
03
04
05
06
07
08
09
11
12
10
13
14
15
16
17
18
19
21
22
20
23
24
25
26
27
28
29
31
32
30
33
34
35
36
37
38
39
41
42
40
43
44
45
46
47
48
49
[NEXT]
Please select channel to be edited.
SAT.1
PRO7
KABEL
Programme Setup “Manual” menu
Programme Setup “Manual”
01
02
Colour sys.
AUTO
PAL-60
SECAM
NTSC 4.43
SAT.1
PRO7
PAL
Fine tuning menu
Colour system menu
Programme Setup “Manual”
01
02
Fine
1 9 6 . 2 5 MHz
SAT.1
PRO7
03
KABEL
Additional channels entry
On Programme Setup “Manual” menu
1
Press a/b/c/d to select a channel number
(highlighted blue), and then press ENTER.
(highlighted blue), and then press ENTER.
• Listed channels are black for “Skip” set to “Off” or blue
for “Skip” set to “On” or no channel.
• The selected channel information displays.
2
Press a/b to select “Skip”, and then press ENTER.
• Skip menu displays.
3
Press a/b to set “Skip” to “Off”, and then press
ENTER.
ENTER.
• Channels with “Skip” set to “On” are skipped even if
you select them by using CHa/CHb while watching
the image from the TV.
the image from the TV.
A
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
Fine tuning
On Programme Setup “Manual” menu
1
Press a/b/c/d to select the channel you want to
edit, and then press ENTER.
edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select “Fine”, and then press ENTER.
• Fine tuning bar displays.
3
Press c/d to adjust the frequency, and then press
ENTER.
ENTER.
• Adjust while checking the background picture as a
reference.
• Instead of the above, you can also set by directly
entering the frequency number of the channel with 0 –
9.
9.
a
• 179.75 MHz: Press 1 s 7 s 9 s 7 s 5 s ENTER.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s ENTER.
• 179.75 MHz: Press 1 s 7 s 9 s 7 s 5 s ENTER.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s ENTER.
A
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
Colour system
On Programme Setup “Manual” menu
1
Press a/b/c/d to select the channel you want to
edit, and then press ENTER.
edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select “Colour sys.”, and then press
ENTER.
ENTER.
• Receivable colour systems are listed.
3
Press a/b to select the optimum colour system,
and then press ENTER.
and then press ENTER.
A
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
26
Sound menu
Programme Setup “Manual”
01
02
Sound sys.
B/G
I
L
L’
SAT.1
PRO7
D/K
Programme Setup “Manual”
01
02
Label
SAT.1
PRO7
03
KABEL
H
O
V
2
A
I
P
W
3
B
J
Q
X
4
C
K
R
Y
5
D
L
S
Z
6
E
M
T
0
7
F
N
U
1
8
9 + –
NEXT
BACK
CLEAR
END
.
G
K
ABEL
Labelling menu
Programme Setup “Manual”
01
02
Skip
Off
SAT.1
PRO7
03
KABEL
On
Skip menu
Basic adjustment settings
Sound system (Broadcasting system)
On Programme Setup “Manual” menu
On Programme Setup “Manual” menu
1
Press a/b/c/d to select the channel you want to
edit, and then press ENTER.
edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select “Sound sys.”, and then press
ENTER.
ENTER.
• Receivable sound systems (Broadcasting systems) are
listed.
3
Press a/b to select the optimum sound system,
and then press ENTER.
and then press ENTER.
A
• If you adjust this setting, please check the colour system
• If you adjust this setting, please check the colour system
information on page 25.
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
• Exit the menu by pressing MENU.
Labelling channels
When a TV channel sends its Network Name, the auto
installation detects the information and assigns a name
to it. However, you can change individual channel
names.
When a TV channel sends its Network Name, the auto
installation detects the information and assigns a name
to it. However, you can change individual channel
names.
On Programme Setup “Manual” menu
1
Press a/b/c/d to select the channel you want to
edit, and then press ENTER.
edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select “Label”, and then press
ENTER.
ENTER.
• Alphabet and numbers are listed.
3
Press a/b/c/d to select each character of the
new name for the channel, and then press ENTER.
new name for the channel, and then press ENTER.
4
Repeat the above until the name is fully spelt out.
• The name can be 5 characters or less.
A
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
Skipping channels
Channels with “Skip” set to “On” are passed over when
using CHa/CHb even if selected while watching the
image from the TV.
Channels with “Skip” set to “On” are passed over when
using CHa/CHb even if selected while watching the
image from the TV.
On Programme Setup “Manual” menu
1
Press a/b/c/d to select the channel you want to
edit, and then press ENTER.
edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select “Skip”, and then press ENTER.
• Skip menu displays.
3
Press a/b to set “Skip” to “On”, and then press
ENTER.
ENTER.
A
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
27
Programme Setup “Manual”
01
02
Lock
Off
SAT.1
PRO7
03
KABEL
On
Programme Setup “Manual”
01
02
Decoder
Off
INPUT2
INPUT3
SAT.1
PRO7
03
KABEL
INPUT1
Basic adjustment settings
Setting the child lock
You can block the viewing of any channel.
You can block the viewing of any channel.
On Programme Setup “Manual” menu
1
Press a/b/c/d to select the channel you want to
edit, and then press ENTER.
edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select “Lock”, and then press
ENTER.
ENTER.
• Child lock menu displays.
3
Press a/b to set “Lock” to “On”, and then press
ENTER.
ENTER.
A
• Even when this function is switched “On”, it will not work if
• Even when this function is switched “On”, it will not work if
a password has not been set. See page 56 for details on
password setting.
password setting.
• When “Lock” is set to “On” for a channel, “Child Lock Has
Been Activated.” displays , and the image and sound of
the channel is blocked.
the channel is blocked.
• When pressing ENTER while “Child Lock Has Been
Activated.” displays, password input menu will display.
Inputting the correct password lifts the child lock
temporarily until the power is turned off.
Inputting the correct password lifts the child lock
temporarily until the power is turned off.
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
• Exit the menu by pressing MENU.
Decoder menu
Lock menu
ENTER
MENU
/
/
/
Setting the decoder
When connecting a decoder to the unit, you need
assign the terminal input.
When connecting a decoder to the unit, you need
assign the terminal input.
On Programme Setup “Manual” menu
1
Press a/b/c/d to select the channel you want to
edit, and then press ENTER.
edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select “Decoder”, and then press
ENTER.
ENTER.
• Terminal inputs information displays.
3
Press a/b to select an INPUT terminal, and then
press ENTER.
press ENTER.
A
• “Off” is factory preset value.
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
• “Off” is factory preset value.
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
Click on the first or last page to see other LC-30HV2E (serv.man24) service manuals if exist.