DOWNLOAD Sharp LC-30HV2E (serv.man24) Service Manual ↓ Size: 10.91 MB | Pages: 71 in PDF or view online for FREE

Off

Flashing red

Red

Green

Power off

AVC System does not turn on or its AC cord is disconnected.

The System is in standby mode.

The System turns the power on.

Power off

Only the AVC System is in standby mode or the System is in standby mode.

The System turns the power on.

Press MAIN POWER on the Display.

• The STANDBY/ON indicator on the Display flashes red.

Press POWER on the AVC System.

• The System turns the power on.
• The STANDBY/ON indicator on the Display lights up green and

the one on the AVC System lights up green.

• If the STANDBY/ON indicators still light up red, press B on

the remote control unit or STANDBY/ON button on the Display
to turn the System on.

Press POWER on the AVC System.

• The STANDBY/ON indicator on the AVC System lights up red.

Press MAIN POWER on the Display.

• The System turns the power on.
• The STANDBY/ON indicator on the Display lights up green and

the one on the AVC System lights up green.

• If the STANDBY/ON indicators still light up red, press B on

the remote control unit or STANDBY/ON button on the Display
to turn the System on.

A
• “System” above means the Display and AVC System.
• The initial auto installation starts when the System powers on for the first

time. If the System has been turned on before, the initial auto installation
will not be invoked. See page 21 to try auto installation from the Setup
menu.

Press B on the remote control unit or STANDBY/ON button
on the Display.

• The System enters standby mode and the image on the screen

disappears.

• Both STANDBY/ON indicators change from green to red.

Press POWER on the AVC System.

• The STANDBY/ON indicator on the AVC System turns off and

the one on the Display flashes red.

Press MAIN POWER on the Display.

• The STANDBY/ON indicator on the Display turns off after

approximately 5 seconds.

A
• If you are not going to use this System for a long time, be sure to remove

the AC cord from the power outlet.

Off

Red

Green

STANDBY/ON indicator

STANDBY/ON indicator

STANDBY/ON button

Auto Installation - Language

English

Deutsch

Français

Italiano

Español

Nederlands

Svenska

Português

Türkçe

Suomi

Auto Installation - Country

Austria

Belgium

Denmark

B/G

B/G

B/G

A

B

DK

1 Press  a/b to select the desired language listed

on the screen.

2 Press ENTER to enter the setting.

1 Press a/b to select your country or area listed on

the screen.

2 Press ENTER to enter the setting.

• The programme auto search starts at the same time.

A
• Return to the Language menu by pressing RETURN.

Auto Installation - Setup “Auto”

01

02

55.25

85.25

03

102.25

04

05

06

07

08

09

10

11

142.25

148.25

When the System powers on for the first time after purchase, the initial auto installation is invoked. You can
automatically set language, country and channels in successive operations.

A
• See page 21 to try Auto installation from the setup menu.

Channel auto search makes the System look for all
channels viewable in the set country or area.

A
• If no channel is found, “No programme found. Is antenna

connected properly?” displays. And the auto installation
is finished.

• If you want to try Auto installation again, see page 21.

/

Auto Installation - Setup “Auto”

01

02

SAT.1

PRO7

03

KABEL

136.25

130.25

04

05

06

07

08

09

10

142.25

11

148.25

12

155.25

Auto Installation - Setup “Auto”

01

02

SAT.1

PRO7

03

KABEL

QVC

VOX

04

05

06

07

08

09

10

-----

11

-----

12

-----

Sending programme 10 settings.

Programme data sent successfully.

Auto Installation completed.

After finding TV channels, the System starts naming
each TV channel found.

A
• The System can only name channels where the channel

labelling information is provided. If channel information is
not provided, the System displays “-----”.

• Cancel the setting by pressing RETURN and the System

automatically returns to the status before programme auto
search.

When channel auto labelling finishes, the System starts
sorting the labelled channels.

A
• Cancel the setting by pressing RETURN. The system

automatically returns to the status before programme auto
search.

When auto sorting finishes, the System automatically
downloads and stores each sorted channel.

• Each time a channel preset download finishes, “Sending

programme 10 settings.” displays. Once all presets have
downloaded,  “Programme data sent successfully.”
displays.

• When a VCR is connected via INPUT 2, the System sends

all preset channel information to the VCR. See pages 23,
40 and 41.

Using CHa

a

a

a

a/b

b

b

b

bon the remote control unit

• Press CHa

a

a

a

a to increase channel number.

• Press CHb 

b 

b 

b 

b to decrease channel number.

A
• CHs/r on the Display operates the same as CHb

b

b

b

b/a

a

a

a

aon

the remote control unit.

MONO

12

SAT.1

1

SAT.1

B/G

PAL

/

0–9

A

When preset download finishes, your initial auto
installation is completed.

• “Auto Installation completed.” displays. After that, the

screen changes to the auto installation menu.

The setup menu disappears and you can watch the
programmes on channel 1.

12

SAT.1

B/G

PAL

Select the channels directly by pressing buttons 0 to
9.
a
To select a 1-digit channel (e.g. channel 2):
• Press 2. If 

“2”

 is indicated and the picture does not

change, press o to switch over to the 1-digit select
mode and press 2 again.

To select a 2-digit channel (e.g. channel 12):
• Press  o  to set the 2-digit select mode. Press 1,

followed by 2.

A
• Complete this procedure within 3 seconds, otherwise the

selection will not be made on the 2-digit channel mode.

View a page directly which is 3-digit page number from
100 to 899 by pressing buttons 0 to 9. With Teletext,
you do not use o. See page 59.

Using Flash back (A) on the remote
control unit

Press A to switch the currently tuned channel to the
previously tuned channel.
Press A again to switch back to the currently tuned
channel.

( Displays after 3 secs. )

CHs/r