DOWNLOAD Sharp XV-Z7000 (serv.man21) Service Manual ↓ Size: 3.57 MB | Pages: 48 in PDF or view online for FREE

This function can be used to adjust the colour
temperature to suit the type of image input to the
projector (video, computer image, TV broadcast, etc.).
Decrease the colour temperature to create warmer,
reddish images for natural flesh tones. Increase the
colour temperature to create cooler, bluish images for
a brighter picture.

1 Press CLR TEMP on the remote control. Each time

CLR TEMP is pressed, colour temperature toggles
as shown below.

Increases colour temperature
for cooler, bluish, florescent-
like images.
(High colour temperature)

Decreases colour temperature
for warmer, reddish,
incandescent-like images.
(Low colour temperature)

s

s

s

RGB/

COMPONENT

INPUT 1

PICT MODE

AUTO SYNC

INPUT 2

GAMMA

KEYSTONE

VIDEO

FREEZE

S-VIDEO

CLR TEMP

1

• Gamma is an image quality enhancement function

that offers a richer image by brightening the darker
portions of the image without altering the brightness
of the brighter portions.

• Three gamma settings are available to allow for

differences in the images displayed and in the
brightness of the room.

• When you are displaying images with frequent, dark

scenes, such as a film or concert, or when you are
displaying images in a bright room, this feature makes
the dark scenes easier to see and gives the impres-
sion of greater depth in the image.

ss

RGB/

COMPONENT

INPUT 1

PICT MODE

AUTO SYNC

INPUT 2

GAMMA

KEYSTONE

VIDEO

FREEZE

S-VIDEO

CLR TEMP

1

1 Press GAMMA on the remote control. Each time

GAMMA is pressed, the gamma level toggles as
shown on the left.

For a highly defined image emphasising  high
contrast and colour reproduction.

For a  warm and moist image controlling
contrast and brightness.

Most suitable when viewing images in a brightly
lit room.

This function allows you to modify or customise the
picture display mode to enhance the input image.
Depending on the input signal, you can choose the
picture display mode preferred.

1 Press  PICT MODE. Each time PICT MODE is

pressed, the picture mode changes as shown
below.

ON/OFF

POWER

LAMP

TEMP.

KEYSTONE

INPUT

BACK

ENTER

MENU

PICT MODE

RGB/

COMPONENT

INPUT 1

PICT MODE

AUTO SYNC

INPUT 2

GAMMA

KEYSTONE

VIDEO

FREEZE

S-VIDEO

CLR TEMP

1

480I/P,

NTSC,

PAL,

SECAM

720P,
1080i

4:3 aspect ratio

Letterbox

Squeeze

16:9 aspect ratio

VGA,

SVGA,

XGA,

SXGA

4:3 aspect ratio

FULL

WIDE

NORMAL

4:3

720P, 1080i

800 

⳯ 600

800 

⳯ 600

800 

⳯ 600

–

800 

⳯ 600

600 

⳯ 450

600 

⳯ 450

600 

⳯ 450

–
–

800 

⳯ 450

800 

⳯ 450

800 

⳯ 450

800 

⳯ 450

–

VGA, SVGA, XGA, SXGA

Letterbox

Squeeze

4:3 aspect ratio
480I/P, NTSC, PAL, SECAM

16:9 aspect ratio, 720P, 1080i

Computer

Video

• When inputting a VGA text mode (640

⳯350) signal or an RGB signal from a device other than a computer, the display is

fixed in FULL (4:3) mode, with the image filling up the whole screen.

This function allows you to check the current input signal
information and the accumulated lamp usage time.

1 Press MENU.

2 Press ∂/ƒ to select “Options”, and then press

ENTER. The current input signal information and
the lamp usage time will be displayed.

• It is recommended that the lamp be replaced after

approximately 900 hours of usage. See pages 38 and 39
for lamp replacement.

When no input signal is detected for more than 15
minutes, the projector will automatically shut off.

1 Press MENU.

2 Press ∂/ƒ to select “Options”, and then press

ENTER.

3 Press ∂/ƒ to select “Auto Power Off”, and then

press ENTER.

4 Press ∂/ƒ to select “ON” or “OFF”.

5 To exit from the GUI, press MENU.

• “Auto Power Off” is factory preset to “ON”.
• “Power OFF in 5 min.” will appear five minutes before the

power is automatically turned off.

Power automatically shuts off after 15 minutes without
a signal being input.

Automatic Power Shutoff disabled.

ON/OFF

POWER

LAMP

TEMP.

KEYSTONE

INPUT

BACK

ENTER

MENU

PICT MODE

VOL

POWER

MUTE

BACK

MENU

ENTER

2, 3, 4

2, 3

1, 5

ON/OFF

POWER

LAMP

TEMP.

KEYSTONE

INPUT

BACK

ENTER

MENU

PICT MODE

VOL

POWER

MUTE

BACK

MENU

ENTER

2

2

1