DOWNLOAD Sharp XV-Z7000 (serv.man21) Service Manual ↓ Size: 3.57 MB | Pages: 48 in PDF or view online for FREE

Model
XV-Z7000 (serv.man21)
Pages
48
Size
3.57 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector / Complete (part1 part2)
File
xv-z7000-sm21.pdf
Date

Sharp XV-Z7000 (serv.man21) User Manual / Operation Manual ▷ View online

1
Important
Information
IMPORTANT
Before using the LCD projector, please read this operation manual carefully.
OPERATION MANUAL
ENGLISH
Model No.: XV-Z7000E
Serial No.:
ENGLISH
WARNING:
 
Intense light source. Do not look into the beam or view it directly. Be especially careful
that children do not look directly into the beam.
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to liquids.
CAUTION:
To reduce the risk of electric shock, do not remove cabinet. No user-serviceable parts
are inside. Refer servicing to qualified service personnel.
2
Important
Information
WARNING:
The cooling fan in this projector continues to run for about 90 seconds after the projector is turned off. During
normal operation, when turning the power off always use the ON/OFF button on the projector or the POWER
button on the remote control. Ensure the cooling fan has stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER
CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.
Caution Concerning the Lamp Replacement
See “Replacing the Projection Lamp” on pages 38 and 39.
LAMP REPLACEMENT CAUTION 
BEFORE REMOVING THE SCREW, DISCONNECT POWER CORD.
HOT SURFACE INSIDE.  ALLOW 1 HOUR TO COOL BEFORE
REPLACING THE LAMP.   REPLACE WITH SAME SHARP LAMP
UNIT  TYPE BQC-PGC20X // 1 ONLY.  UV RADIATION : CAN CAUSE
EYE DAMAGE.   TURN OFF LAMP  BEFORE SERVICING.
MEDIUM PRESSURE LAMP : RISK OF EXPLOSION.
POTENTIAL HAZARD OF GLASS  PARTICLES IF LAMP HAS
RUPTURED.  HANDLE WITH CARE.  SEE  OPERATION MANUAL.
REMPLACEMENT DE LA LAMPE.
USER SERVICE SCREW
VIS POUR ENTRETIEN PAR L’UTILISATEUR
PRECAUTIONS A OBSERVER  LORS DU
DEBRANCHER LE CORDON D’ALIMENTATION AVANT DE RETIRER LES VIS.
L’INTERIEUR DU BOITIER ETANT EXTREMEMENT CHAUD, ATTENDRE 1 HEURE
AVANT DE PROCEDER AU REMPLACEMENT DE LA LAMPE.
NE REMPLACER QUE PAR UNE LAMPE SHARP DE TYPE BQC- PGC20X // 1.
RAYONS ULTRAVIOLETS :  PEUVENT  ENDOMMAGER  LES YEUX.
ETEINDRE LA LAMPE AVANT DE PROCEDER A L’ENTRETIEN.
LAMPE A MOYENNE PRESSION : RISQUE D’EXPLOSION.  DANGER POTENTIEL
DE PARTICULES DE VERRE EN CAS D’ECLATEMENT DE LA LAMPE.
A MANIPULER AVEC PRECAUTION, SE REPORTER AU MODE D’EMPLOI.
ENGLISH
3
Important
Information
Important Safeguards
ATTENTION: Please read all of these instructions before you operate your LCD Projector
for the first time. Save these instructions for future reference.
For your own protection and prolonged operation of your LCD Projector, be sure to read the following “Important
Safeguards” carefully, before use.
This projector has been engineered and manufactured to ensure your personal safety. But IMPROPER USE CAN
RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In order not to defeat the safeguards
incorporated into this LCD Projector, observe the following basic rules for its installation, use and servicing.
17. Unplug the LCD Projector equipment from the wall outlet
and refer servicing to qualified service personnel under
the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the LCD Projector.
c. If the LCD Projector has been exposed to rain or
water.
d. If the LCD Projector does not operate normally
when you follow the operating instructions. Adjust
only those controls that are covered by the oper-
ating instructions, as improper adjustment of other
controls may cause damage and will often require
extensive work by a qualified technician to restore
the LCD Projector to normal operation.
e. If the LCD Projector has been dropped or the
cabinet has been damaged.
f.
When the LCD Projector exhibits a distinct change
in performance—this indicates a need for service.
18. When replacement parts are required, be sure the ser-
vice technician has used replacement parts specified by
the manufacturer that have the same characteristics as
the original parts. Unauthorised substitutions may result
in fire, electric shock, or other hazards.
19. This LCD Projector is provided with one of the following
types of plugs. If the plug should fail to fit into the power
outlet, please contact your electrician.
Do not defeat the safety purpose of the plug.
a. Two-wire type mains plug.
b. Three-wire grounding type mains plug with a
grounding terminal.
This plug will only fit into a grounding type power
outlet.
1. Unplug the LCD Projector from the wall outlet before
cleaning.
2. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
3. Do not use attachments not recommended by the LCD
Projector manufacturer, as they may cause hazards.
4. Do not use the LCD Projector near water; for example,
near a bathtub, washbowl, kitchen sink, laundry tub, in a
wet basement, near a swimming pool, etc. Never spill
liquid into the projector.
5. Do not place the LCD Projector on an unstable cart, stand,
or table. The LCD Projector may fall, which may cause
serious injury to a child or an adult, and/or serious damage
to the unit.
6. Wall or Ceiling Mounting—The product should be
mounted to a wall or ceiling only as recommended by
the manufacturer.
7. LCD Projector equipment and cart
combinations should be moved
with care. Quick stops, excessive
force, and uneven surfaces may
cause the equipment and cart
combination to overturn.
8. Slots and openings in the cabinet back and bottom are
provided for ventilation. To ensure reliable operation of
the LCD Projector and to protect it from overheating, these
openings must not be blocked or covered. The openings
should never be covered with cloth or other material.
9. This LCD Projector should never be placed near or over
a radiator or heating vent. The LCD Projector should not
be placed in a built-in installation such as a bookcase
unless proper ventilation is provided.
10. The LCD Projector should be operated only from the type
of power source indicated on the back of the projector or
in the specifications. If you are not sure of the type of
power supplied to your home, consult your LCD Projector
dealer or local power company.
11. Do not place the LCD Projector where the cord will be
abused by persons walking on it.
12. Follow all warnings and instructions marked on the LCD
Projector.
13. To prevent damage to the projector due to lightning and
power-line surges, unplug the projector from the power
outlet, when not in use.
14. Do not overload wall outlets and extension cords with too
many products, because this can result in fire or electric
shock.
15. Never push objects of any kind into the LCD Projector
through the cabinet slots as they may touch high-voltage
points or cause a short circuit. This could result in a fire
or electric shock.
16. Do not attempt to service the LCD Projector yourself.
Opening or removing covers may expose you to dan-
gerous voltage or other hazards. Refer all servicing to
qualified service personnel.
4
Important
Information
Outstanding Features
1. WIDESCREEN IMAGES
Allows projection of DVD, DTV and other anamorphic images recorded in widescreen format with a 16:9 aspect ratio. (Page
31)
2. BRIGHTNESS SWITCHOVER FUNCTION
Function with toggle switch to control the quantity of projected light. Select “ON” or “OFF” to decrease or increase brightness,
power consumption and fan noise. (Page 33)
3. FOR USE WITH DTV*
Allows projection of DTV images and 16:9 wide-screen images when connected to a DTV decoder or similar video systems.
(Page 11)
4. ADVANCED VIDEO CIRCUITRY
Provides high quality images with minimal dot crawl and cross colour noise.
5. 3D DIGITAL UNIFORMITY
Equipped with new 3D digital uniformity technology for a clearer, more uniform image.
6. NEW PROGRESSIVE MODE AND FILM MODE
Optimises the image by converting the interlaced signal to the progressive. Useful for displaying slow-moving images or still
images. Four modes are available, and the film mode beautifully reproduces movie film recorded in 24 Hz progressive format.
(Page 25)
7. ANALOG COMPONENT VIDEO INPUT
Utilises a component video input signal (Y, C
B
, C
R
). The video signal is input as separate components to provide superior
colour and image quality.
8. ACTIVE DIGITAL KEYSTONE CORRECTION
Corrects keystone distortion caused when the projected image is not perpendicular to the screen. This method provides not
only horizontal correction, but vertical as well, thus maintaining the original 4:3 aspect ratio and eliminating jag lines. (Page 19)
9. EASY-TO-USE GRAPHICAL USER INTERFACE (GUI)
A multi-colour menu system allows for simple image adjustments. (Page 20)
10. COLOUR TEMPERATURE  ADJUSTMENT
The function can be used to adjust the colour temperature to suit the type of image input to the projector. (Page 29)
11. GAMMA CORRECTION FUNCTION
The gamma value setting can be adjusted according to the input source for optimal image contrast. (Page 30)
12. DIRECT COMPUTER COMPATIBILITY
A multi-scan RGB input accepts signals from VGA (640 dots 
⳯ 480 lines) to SXGA (1,280 dots ⳯ 1,024 lines) and Macintosh
(from 13
ⴖ) compatible computers without the need for any additional hardware.
*DTV is the umbrella term used to describe the new digital television system in the united states.
Page of 48
Display

Sharp XV-Z7000 (serv.man21) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp XV-Z7000 (serv.man21) Service Manual ↓ Size: 3.57 MB | Pages: 48 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp XV-Z7000 (serv.man21) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp XV-Z7000 (serv.man21) Projector. Information contained in Sharp XV-Z7000 (serv.man21) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.