Sharp XV-Z7000 (serv.man21) User Manual / Operation Manual ▷ View online
25
Operation
Picture Adjustments
Projector
Remote Control
Selecting the Signal Type
This function allows you to select the input signal type
(RGB or COMPONENT) for INPUT 2 port.
(RGB or COMPONENT) for INPUT 2 port.
1 Press MENU.
2 Press ∂/ƒ to select “Picture” in INPUT 2 (RGB)
mode, and then press ENTER.
3 Press ∂/ƒ to select “Signal Type”, and then press
ENTER.
4 Press ∂/ƒ to select “Component” or “RGB”.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
Projector
Remote Control
(GUI) On-screen Display
(GUI) On-screen Display
Progressive Mode
This function allows you to select the progressive display
of a video signal. The progressive display projects a
smoother video image. For reducing distortion and
noise, select an item in “Progressive” for optimum image
quality.
of a video signal. The progressive display projects a
smoother video image. For reducing distortion and
noise, select an item in “Progressive” for optimum image
quality.
1 Press MENU.
2 Press ∂/ƒ to select “Picture2” in S-VIDEO or
VIDEO mode, and then press ENTER.
3 Press ∂/ƒ to select “Progressive”, and then press
ENTER.
4 Press ∂/ƒ to select the desired progressive
display.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK
ENTER
MENU
PICT MODE
VOL
POWER
MUTE
BACK
MENU
ENTER
2, 3, 4
2, 3, 5
1, 6
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK
ENTER
MENU
PICT MODE
VOL
POWER
MUTE
BACK
MENU
ENTER
2, 3, 4
2, 3, 5
1, 6
Description of Progressive Modes
2D Progressive
Useful for displaying fast-moving images such as sports and action
films. Mode that optimises the image in a displayed frame.
films. Mode that optimises the image in a displayed frame.
3D Progressive
Useful for displaying relatively slow-moving images such as drama
and documentary more clearly. Mode that optimises the image by
estimating the movement of a number of preceding and succeeding
frames.
and documentary more clearly. Mode that optimises the image by
estimating the movement of a number of preceding and succeeding
frames.
Film Mode 1
Effective for displaying action movies or other fast-moving film
sources.
sources.
Film Mode 2
Effective for displaying still images or slow-moving film sources as in
a documentary.
a documentary.
• The film source is a digital video recording with the original encoded
as is at 24 frames/second. The projector can convert this film source
to progressive video at 60 frames/second to play back a high-
definition image.
to progressive video at 60 frames/second to play back a high-
definition image.
26
Operation
Computer Image Adjustments (INPUT 2 (RGB) mode only)
Auto Sync Adjustment
• Used to automatically adjust a computer image.
• Auto Sync adjustment can be made manually by
• Auto Sync adjustment can be made manually by
pressing AUTO SYNC.
• The sync adjustment is automatically made each time the
projector is turned on while connected to a computer or
the input selection is changed.
the input selection is changed.
1 Press AUTO SYNC on the remote control.
Remote control
On-screen Display
During Auto Sync adjustment, “Adjusting The Image”
is displayed as shown on the left.
is displayed as shown on the left.
• Auto Sync adjustment may take some time to complete,
depending on the image of the computer connected to the
projector.
projector.
• When the optimum image cannot be achieved with Auto
Sync adjustment, use manual adjustments. (See page 27.)
RGB/
COMPONENT
INPUT 1
PICT MODE
AUTO SYNC
INPUT 2
GAMMA
KEYSTONE
VIDEO
FREEZE
S-VIDEO
CLR TEMP
1
27
Operation
Computer Image Adjustments (INPUT 2 (RGB) mode only)
Adjusting the Computer Image
When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
occur between the LCD pixels, causing flickering,
vertical stripes, or contrast irregularities in portions of
the screen. Should this occur, adjust “Clock”, “Phase”,
“H-Pos” and “V-Pos” for the optimum computer image.
detailed (tiling, vertical stripes, etc.), interference may
occur between the LCD pixels, causing flickering,
vertical stripes, or contrast irregularities in portions of
the screen. Should this occur, adjust “Clock”, “Phase”,
“H-Pos” and “V-Pos” for the optimum computer image.
• Computer image adjustments can be made easily by
pressing AUTO SYNC (
). See page 26 for details.
(GUI) On-screen Display
Projector
Adjusts vertical noise.
Adjusts horizontal noise (similar to tracking on your VCR).
Centres the on-screen image by moving it to the left or right.
Centres the on-screen image by moving it up or down.
Adjusts horizontal noise (similar to tracking on your VCR).
Centres the on-screen image by moving it to the left or right.
Centres the on-screen image by moving it up or down.
Clock
Phase
H-Pos
V-Pos
Phase
H-Pos
V-Pos
Description of Adjustment Items
(
Select the desired computer input mode with INPUT
on the projector or INPUT 2 on the remote control.)
1 Press MENU.
2 Press ∂/ƒ to select “Fine Sync”, and then press
ENTER.
3 Press ∂/ƒ to select a specific adjustment item,
and then press ENTER.
4 Press ∂/ƒ to move the
mark of the selected
adjustment item to the desired setting.
5 To exit from the GUI, press MENU.
• The value range of “Clock” setting is limited by the type of
signal received.
• To reset all adjustment items, select “Reset” on the “Fine
Sync” menu screen and press ENTER.
Description
Selected item
Remote control
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK
ENTER
MENU
PICT MODE
VOL
POWER
MUTE
BACK
MENU
ENTER
2, 3, 4
2, 3
1, 5
Useful Features
28
Useful Features
Freeze Function
This function allows you to instantly freeze a moving
image. This is useful when you want to display a still
image from a computer or video, giving you more time
to explain the image to the audience.
image. This is useful when you want to display a still
image from a computer or video, giving you more time
to explain the image to the audience.
1 Press FREEZE on the remote control to freeze
the image.
2 Press FREEZE again to return to the moving
image.
Remote control
On-screen Display
RGB/
COMPONENT
INPUT 1
PICT MODE
AUTO SYNC
INPUT 2
GAMMA
KEYSTONE
VIDEO
FREEZE
S-VIDEO
CLR TEMP
1, 2
Click on the first or last page to see other XV-Z7000 (serv.man21) service manuals if exist.