View Sharp XV-Z2000E (serv.man29) User Guide / Operation Manual online
Printed in China
TINS-B733WJZZ
04P11-CNM
TINS-B733WJZZ
04P11-CNM
INSTALLATION MANUAL
CAUTION:
••••• Potential hazard of glass particles if lamp ruptures. Please have a Sharp Authorized Projector Dealer or
••••• Potential hazard of glass particles if lamp ruptures. Please have a Sharp Authorized Projector Dealer or
Service Center* replace lamp if rupture occurs.
••••• Do not remove the lamp unit directly after operation of the projector. The lamp may be extremely hot. Wait at
least one hour after the power cord is disconnected to allow the surface of the lamp unit to fully cool before
removing the lamp unit.
removing the lamp unit.
■ It is recommended that the lamp be replaced when the remaining lamp life becomes 5% or less, or when you notice a signifi-
cant deterioration in the picture and color quality. The lamp life (percentage) can be checked with the on-screen display.
IMPORTANT NOTE TO U.S. CUSTOMERS:
The lamp included with this projector is backed by a 90-day parts and labor limited warranty. All service of this
projector under warranty, including lamp replacement, must be obtained through a Sharp Authorized Projector
Dealer or Service Center*. For the name of the nearest Sharp Authorized Projector Dealer or Service Center*,
please call toll-free: 1-888-GO-SHARP (1-888-467-4277).
The lamp included with this projector is backed by a 90-day parts and labor limited warranty. All service of this
projector under warranty, including lamp replacement, must be obtained through a Sharp Authorized Projector
Dealer or Service Center*. For the name of the nearest Sharp Authorized Projector Dealer or Service Center*,
please call toll-free: 1-888-GO-SHARP (1-888-467-4277).
Hg LAMP CONTAINS MERCURY For State Lamp Disposal Information
www.lamprecycle.org or 1-800-BE-SHARP
www.lamprecycle.org or 1-800-BE-SHARP
U.S.A. ONLY
* Confirm the name of the Dealer or Service Center referring to your projector operation manual.
1
2
User service screw
(for lamp unit cover)
(for lamp unit cover)
Tab
Tab
User service screw
(for lamp unit cover)
(for lamp unit cover)
Securing screws
Handle
LAMP UNIT (LAMP/CAGE MODULE) FOR PROJECTOR
Model
AN-K2LP
4
Remove the lamp unit.
• Loosen the two securing screws from the lamp
unit. Hold the lamp unit by the handle and pull
it in the direction of the arrow. At this time, keep
the lamp unit horizontal and do not tilt it.
it in the direction of the arrow. At this time, keep
the lamp unit horizontal and do not tilt it.
5
Insert the new lamp unit.
• Press the lamp unit firmly into the lamp unit
compartment. Fasten the securing screws.
6
Replace the lamp unit cover.
• Align the lamp unit cover and slide it to close.
Then tighten the user service screw to secure
the lamp unit cover.
the lamp unit cover.
Info
• If the lamp unit and lamp unit cover are not cor-
rectly installed, the power will not turn on, even if
the power cord is connected to the projector.
the power cord is connected to the projector.
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
Info
• Make sure to reset the lamp timer only when re-
placing the lamp. If you reset the lamp timer and
continue to use the same lamp, this may cause the
lamp to become damaged or explode.
continue to use the same lamp, this may cause the
lamp to become damaged or explode.
1
Connect the power cord.
• Plug the power cord into the AC socket of the
projector.
2
Reset the lamp timer.
• Press ,
,
, \
\
\
\
\,
and |
|
|
|
| on the projector
in order, and then press
on the projector.
• “LAMP 0000H” is displayed on the lower left of
the screen, indicating that the lamp timer is re-
set.
set.
AC socket
\
/
|
buttons
ON button
ENTER button
UNDO button
INPUT button
AC socket
STANDBY button
Removing and Installing the Lamp Unit
Warning!
• During projector operation, the lamp unit is very hot. Do not remove the lamp unit from the projector right after
use. The lamp and parts around the lamp will be very hot and may cause burn or injury.
Info
• Ensure the lamp unit is removed using the handle.
Ensure the glass surface of the lamp unit or the
inside of the projector are not touched.
inside of the projector are not touched.
• To avoid injury to yourself and damage to the lamp,
ensure to carefully follow the steps below.
• Do not loosen other screws except for the lamp unit
cover and lamp unit.
1
Press
on the projector or
on
the remote control to put the projec-
tor into standby mode.
tor into standby mode.
• Wait until the cooling fan stops.
2
Disconnect the power cord.
• Unplug the power cord from the AC socket.
• Leave the lamp until it has fully cooled down
• Leave the lamp until it has fully cooled down
(about 1 hour).
3
Remove the lamp unit cover.
• Turn the projector over. Loosen the user ser-
vice screw (1) that secures the lamp unit
cover. Hold the tab and slide towards the direc-
tion of the arrow to remove the lamp unit cover
(2).
cover. Hold the tab and slide towards the direc-
tion of the arrow to remove the lamp unit cover
(2).
ANK2LP_TINS_WJZZ_E.p65
04.10.13, 17:27
1
Hinsichtlich der Anweisungen in Ihrer Sprache lesen Sie bitte die im
Lieferumfang des Projektors enthaltene Bedienungsanleitung.
Sie können die Bedienungsanleitung auch von der Website
(
Lieferumfang des Projektors enthaltene Bedienungsanleitung.
Sie können die Bedienungsanleitung auch von der Website
(
http://sharp-world.com/products/index.html
) herunterladen.
DEUTSCH
FRANÇAIS
ESPAÑOL
ITALIANO
NEDERLANDS
SVENSKA
PORTUGUÊS
Pour des instructions dans votre langue, reportez-vous au mode d’emploi
fourni avec le projecteur.
Vous pouvez également télécharger le mode d’emploi sur le site Internet
(http://sharp-world.com/products/index.html).
fourni avec le projecteur.
Vous pouvez également télécharger le mode d’emploi sur le site Internet
(http://sharp-world.com/products/index.html).
Encontrará las instrucciones en su idioma en el manual de manejo que se
suministra con el proyector.
También puede descargar el manual de manejo del sitio Web
(http://sharp-world.com/products/index.html).
suministra con el proyector.
También puede descargar el manual de manejo del sitio Web
(http://sharp-world.com/products/index.html).
Per ricevere istruzioni nella propria lingua, fare riferimento al manuale
d’uso fornito con il proiettore.
È inoltre possibile scaricare lo stesso manuale d’uso dal sito web
(
d’uso fornito con il proiettore.
È inoltre possibile scaricare lo stesso manuale d’uso dal sito web
(
http://sharp-world.com/products/index.html
).
Voor aanwijzingen in uw taal verwijzen wij u naar de gebruiksaanwijzing
die bij de projector wordt geleverd.
U kunt de gebruiksaanwijzing ook vanaf internet downloaden
(
die bij de projector wordt geleverd.
U kunt de gebruiksaanwijzing ook vanaf internet downloaden
(
http://sharp-world.com/products/index.html
).
Se bruksanvisningen som medföljer projektorn angående anvisningar på
ditt språk.
Bruksanvisningen kan också nerladdas från vår webbsajt
(
ditt språk.
Bruksanvisningen kan också nerladdas från vår webbsajt
(
http://sharp-world.com/products/index.html
).
Para instruções no seu idioma, consultar o manual de operação fornecido
com o projetor.
Pode-se também baixar o manual de operação pela internet
(
com o projetor.
Pode-se também baixar o manual de operação pela internet
(
http://sharp-world.com/products/index.html
).
ANK2LP_TINS_WJZZ_E.p65
04.10.13, 17:27
2
