Sharp XV-Z2000E (serv.man28) User Manual / Operation Manual ▷ View online
-22
When connecting the video equipment with RGB output terminal (INPUT 5)
• Before connecting the cable, switch the digital input type switch to “VIDEO”.
INPUT 5 terminal
DVI to 15-pin D-sub adaptor
(sold separately: AN-A1DV)
RGB output terminal
RGB cable
(commercially available)
DVD Player,etc.
4
3
2
Switch to “VIDEO”
1
Connecting to Video Equipment
Note
• For this connection, select “RGB” for “Signal Type” on the OSD menu or press
on the remote control.
(See page 48.)
When connecting the component video equipment to the DVI input terminal on the projector (INPUT 5)
• Before connecting the cable, switch the digital input type switch to “VIDEO”.
Note
• For this connection, select “Component” for “Signal Type” on the OSD menu or press
on the remote
control. (See page 48.)
INPUT 5 terminal
DVI to 15-pin D-sub adaptor
(sold separately: AN-A1DV)
3 RCA to 15-pin D-sub cable
(sold separately: AN-C3CP)
(sold separately: AN-C3CP)
Analog component
output terminal
DVD Player,etc.
4
3
2
Switch to “VIDEO”
1
XV-Z2000E_E_P19_27.p65
2004.10.20, 11:51 AM
22
-23
Connections
DIGITAL terminal
DVI output terminal
DVI cable
(sold separately: AN-C3DV)
Switch to “VIDEO”
DVD Player,etc.
2
3
1
Note
• Select DIGITAL mode when connecting to video equipment with the digital output terminal. (See page
29.)
When connecting the video equipment with DVI output terminal (DIGITAL)
• Before connecting the cable, switch the digital input type switch to “VIDEO”.
XV-Z2000E_E_P19_27.p65
2004.10.20, 11:51 AM
23
-24
When connecting video equipment with S-video output terminal (INPUT 3)
When connecting video equipment with video output terminal (INPUT 4)
S-video cable
(commercially available)
S-video output terminal
INPUT 3 terminal
DVD Player,etc.
2
1
INPUT 4 terminal
Video output terminal
Composite video cable
(supplied)
DVD Player,etc.
1
2
Connecting to Video Equipment
XV-Z2000E_E_P19_27.p65
2004.10.20, 11:51 AM
24
-25
Connections
Connecting to a Computer
Connecting to a computer (INPUT 5)
• Before connecting the cable, switch the digital input type switch to “PC”.
RGB output terminal
INPUT 5 terminal
RGB cable (commercially available)
DVI to 15-pin D-sub adaptor
(sold separately: AN-A1DV)
Computer
4
3
2
Switch to “PC”
1
Note
• Refer to “Computer Compatibility Chart” on page 61 for a list of computer signals compatible with the projector. Use
with computer signals other than those listed may cause some of the functions not to work.
• When connecting the projector to a computer in this way, select “RGB” for “Signal Type” on the OSD menu or press
on the remote control. (See page 48.)
• A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Sharp Authorised
Projector Dealer or Service Centre.
• Depending on the computer you are using, an image may not be projected unless the signal output setting of the
computer is switched to the external output. Refer to the computer operation manual for switching the computer
signal output settings.
signal output settings.
When connecting a computer, ensure that it is the last device to be turned on after all the
connections are made.
connections are made.
XV-Z2000E_E_P19_27.p65
2004.10.20, 11:51 AM
25
Click on the first or last page to see other XV-Z2000E (serv.man28) service manuals if exist.